Author Index

A

  • Abbasi, sarallah Effect of Tip Injection on Tip Leakage Flow Structure in Axial Compressor [Volume 12, Issue 5, 2022, Pages 147-160]
  • Abdolmaleki, Arash Vibration Analysis of Circular Nanoplates under Nonlinear Electrostatic Excitation Considering the Surface Energy and Size Effects [Volume 12, Issue 5, 2022, Pages 133-146]
  • Abdul A meer, Sabah Experimental study of solar collector with helical coil [Volume 12, Issue 5, 2022, Pages 283-292]
  • Abdullah, A. Experimental investigation of vibrational mode shape influence on compression behaviour of Ti-6Al-4V alloy under superimposed ultrasonic vibration [Volume 12, Issue 4, 2022, Pages 55-68]
  • Abedi, Sh. Development of a suitable numerical solution algorithm for the two-phase Euler-Lagrange approach with four way coupling in spray simulation [Volume 12, Issue 4, 2022, Pages 133-144]
  • Abedini, R. Experimental investigation of vibrational mode shape influence on compression behaviour of Ti-6Al-4V alloy under superimposed ultrasonic vibration [Volume 12, Issue 4, 2022, Pages 55-68]
  • Adollahi, Reza Numerical Study of Thermo Hydraulic Effect of Wire Wrap Spacer with Different Pitch in Hexagonal Fuel Assembly [Volume 12, Issue 6, 2023, Pages 205-217]
  • Afshin, H. Investigation of the effect of several impressive parameters on fire extinguishing in a progressive coal tunnel [Volume 12, Issue 4, 2022, Pages 117-131]
  • Ahmadi, Habib Kinematic and inverse kinematic analysis of hybrid Delta parallel robot with spherical wrist using Adptive Neuro Fuzzy Inference System [Volume 12, Issue 5, 2022, Pages 13-30]
  • Ahmadi, Hamed Experimental and numerical analysis of the effect of using two perforated plates in front of the target against ballistic impact [Volume 12, Issue 5, 2022, Pages 175-187]
  • Ahmadi, Isa Free Vibration Analysis of Piezoelectric Nanobeam Based on a 2ِِD- Formulation and Non-local Elasticity Theory [Volume 12, Issue 5, 2022, Pages 59-72]
  • Ahmadi Brooghani, S. Y. Effect of Through-thickness Variation of Mechanical Properties on Stress Distribution in API X65 Linepipe Steel: An Experimental and Numerical Investigation [Volume 12, Issue 4, 2022, Pages 81-90]
  • Ajorloo, D. Mathematical model of a vacuum box electric furnace for online computation: A nonlinear ordinary differential equation model and experimental verification [Volume 12, Issue 1, 2022, Pages 145-157]
  • Akbari Sula, A. Experimental Study of a Single Bubble Growth and Detachment from a Submerged Orifice in the Liquid Column Using Passive Acoustic Emission [Volume 12, Issue 1, 2022, Pages 133-142]
  • Akbarzadeh, S. Thermal elastohydrodynamic analysis of mechanical sealsi using finite difference method [Volume 12, Issue 1, 2022, Pages 101-114]
  • Alinia-ziazi, Ali Investigation on the effect of laser cladding parameters of Inconel 713 LC by Metco 81VF powder on the microstructure characteristics and micro hardness of coating [Volume 12, Issue 5, 2022, Pages 93-108]
  • Alitavoli, Majid Experimental investigation into the energy absorption of sandwich structures with the core made of waste rubber particles under impact loading [Volume 12, Issue 6, 2023, Pages 13-23]
  • Alizadeh, Masoud Fusion of inertial measurement system and visual navigation for unmanned aerial vehicles using Hardware in the Loop simulation [Volume 12, Issue 5, 2022, Pages 31-46]
  • Almultashi, Mohammed Experimental study of solar collector with helical coil [Volume 12, Issue 5, 2022, Pages 283-292]
  • Amerian, M. experimentally study of thermal resistance coefficient in closed loop pulsating heat pipe and the effect of filling ratio and evaporator to condenser length ratio on it [Volume 12, Issue 4, 2022, Pages 175-187]
  • Amin Borhani, Mohammad Numerical Study of Thermo Hydraulic Effect of Wire Wrap Spacer with Different Pitch in Hexagonal Fuel Assembly [Volume 12, Issue 6, 2023, Pages 205-217]
  • Amini, Yasser Heat transfer enhancement in a microchannel using active vibrating piezoelectric vortex generator [Volume 12, Issue 6, 2023, Pages 191-204]
  • Aminian, Ehsan Analysis of the effect of surface slope changes on the growth, motion, and coalescence of droplets in dropwise condensation [Volume 12, Issue 6, 2023, Pages 163-180]
  • Aminzadeh, A. Distributed Coverage Control of a Multi Agent System in a Disaster Area and Localizing the Stationary Probable Targets in the Environment [Volume 12, Issue 1, 2022, Pages 1-20]
  • Amir, S. Aerodynamic and Free Vibration Analyses of Metal Foams Reinforced Graphene Nanoplatelets Sector Plates [Volume 12, Issue 2, 2022, Pages 29-48]
  • Ansari, M. R. Experimental Study of a Single Bubble Growth and Detachment from a Submerged Orifice in the Liquid Column Using Passive Acoustic Emission [Volume 12, Issue 1, 2022, Pages 133-142]
  • Arshid, E. Aerodynamic and Free Vibration Analyses of Metal Foams Reinforced Graphene Nanoplatelets Sector Plates [Volume 12, Issue 2, 2022, Pages 29-48]
  • Ashrafi, Mohammad Javad Experimental and numerical study on the effects of friction and specimen dimension in split Hopkinson pressure bar [Volume 12, Issue 5, 2022, Pages 1-11]
  • Azimi, Alireza The effect of interlayer on the microstructural characteristic and mechanical properties of diffusion welding between 17-4PH steel and Ti6Al4V alloy [Volume 12, Issue 3, 2022, Pages 45-56]
  • Azimi, A.R. The effect of diffusion welding parameters on the microstructural characteristics and mechanical properties of dissimilar joint between 17-4PH steel and Ti6Al4V alloy using nickel interlayer [Volume 12, Issue 4, 2022, Pages 41-54]

B

  • Babaei, Hashem Experimental investigation into the energy absorption of sandwich structures with the core made of waste rubber particles under impact loading [Volume 12, Issue 6, 2023, Pages 13-23]
  • Babaei, M. Analytical and experimental study of fatigue in 7075 aluminum nanocomposite reinforced with silicon carbide particles produced by vortex method [Volume 12, Issue 1, 2022, Pages 85-100]
  • Babaei, M. Detection of Single and Multiple Cracks in Circular Cylindrical Shells Using Modal Analysis and Wavelet Transform [Volume 12, Issue 2, 2022, Pages 13-28]
  • Babaei espooei, Reza Thermodynamic and Exergoeconomic modeling of a modified Organic Rankine Cycle (ORC) augmented with heat exchanger Provided by geothermal source [Volume 12, Issue 5, 2022, Pages 189-200]
  • Baghban, Amir Tracing structural static path by dynamic relaxation method [Volume 12, Issue 6, 2023, Pages 35-48]
  • Bagheri, Zahra Experimental investigation into the energy absorption of sandwich structures with the core made of waste rubber particles under impact loading [Volume 12, Issue 6, 2023, Pages 13-23]
  • Baghestan, K. Hydraulic Hybrid Propulsion System Design and Simulation [Volume 12, Issue 2, 2022, Pages 1-12]
  • Behinfar, Parsa Analytical and Numerical Solution for Auxetic Stent with Re-entrant Geometry and its Multi-Objective Optimization [Volume 12, Issue 6, 2023, Pages 125-137]
  • Beigzadeh, Borhan Modeling and simulation of the interaction forces between the gait rehabilitation system with a musculoskeletal-model of human body [Volume 12, Issue 6, 2023, Pages 1-12]
  • Bidarian, V. Modelling and Optimization of Geometrical Parameters in Design of the Wavy-Fin-Plate Compact Heat Exchanger by Taguchi method [Volume 12, Issue 3, 2022, Pages 89-101]
  • Biglari, H. Green’s functions resulting from wave propagation in a single-layer porous isotropic foam with finite thickness [Volume 12, Issue 4, 2022, Pages 13-26]

C

  • Chegini, Reyhaneh Modeling and simulation of the interaction forces between the gait rehabilitation system with a musculoskeletal-model of human body [Volume 12, Issue 6, 2023, Pages 1-12]

D

  • DANANDEH OSKUEI, HOJJAT Numerical investigation of the effect of an elastic wall on Heat Transfer around a cylinder within a channel [Volume 12, Issue 5, 2022, Pages 47-58]
  • Dashti Mahmoud-abadi, B. Numerical simulation of Lucid spherical turbine and investigation the effect of different parameters of blades on its performance [Volume 12, Issue 1, 2022, Pages 115-131]
  • Dashti Rahmatabadi, A. Effect of Using Nano Lubricant Containing TiO2 Particles on the Performance of Noncircular Two Lobe Journal Bearings [Volume 12, Issue 3, 2022, Pages 103-116]
  • Dehghan Manshadi, M. Experimental Study of LEX Angle Effect on Vortical Flow Over the Diamond Wing with Airfoil-Shaped Section by Using Hot-wire and Five-hole Probe [Volume 12, Issue 2, 2022, Pages 81-91]
  • Delbari, Seyed Ali Vibration Analysis of Circular Nanoplates under Nonlinear Electrostatic Excitation Considering the Surface Energy and Size Effects [Volume 12, Issue 5, 2022, Pages 133-146]

E

  • Eslami, Mohammad Hossein Numerical and experimental study of orthogonal cutting bone using elastic-plastic material model and dynamic damage model [Volume 12, Issue 6, 2023, Pages 49-65]
  • Esmaeel zadeh vali, Shahab Effect of Tip Injection on Tip Leakage Flow Structure in Axial Compressor [Volume 12, Issue 5, 2022, Pages 147-160]
  • Estiri, Hossein Tracing structural static path by dynamic relaxation method [Volume 12, Issue 6, 2023, Pages 35-48]

F

  • Fallahi, E. Mechanical behavior analysis of buried glass fiber reinforced epoxy composites used in pipelines and comparison with steel [Volume 12, Issue 1, 2022, Pages 35-50]
  • Fallahi Arezoodar, A.R. Experimental investigation of vibrational mode shape influence on compression behaviour of Ti-6Al-4V alloy under superimposed ultrasonic vibration [Volume 12, Issue 4, 2022, Pages 55-68]
  • Farahani, S. Thermoeconomic optimization and investigation of condensation effect on Shell & Tube condenser in the presence of non-condensable gases with a new approach [Volume 12, Issue 1, 2022, Pages 159-173]
  • Faraji, Hamed Extraction of force and critical time of three-dimensional manipulation of colon cancer tissue with different models of Persson friction [Volume 12, Issue 6, 2023, Pages 113-123]
  • Farhanieh, B. Investigation of the effect of several impressive parameters on fire extinguishing in a progressive coal tunnel [Volume 12, Issue 4, 2022, Pages 117-131]
  • Fartashvand, V. Experimental investigation of vibrational mode shape influence on compression behaviour of Ti-6Al-4V alloy under superimposed ultrasonic vibration [Volume 12, Issue 4, 2022, Pages 55-68]
  • Farzi, A. H. Analytical and experimental study of fatigue in 7075 aluminum nanocomposite reinforced with silicon carbide particles produced by vortex method [Volume 12, Issue 1, 2022, Pages 85-100]
  • Fasahat, Mahmoud Investigation on the effect of laser cladding parameters of Inconel 713 LC by Metco 81VF powder on the microstructure characteristics and micro hardness of coating [Volume 12, Issue 5, 2022, Pages 93-108]
  • Firouzi, Vahid Modeling and simulation of the interaction forces between the gait rehabilitation system with a musculoskeletal-model of human body [Volume 12, Issue 6, 2023, Pages 1-12]

G

  • Ganjali, Ahmad Investigating the efficiency of error estimation based on strees recovery in the adaptive solution of functionally graded materials by isogeometric method [Volume 12, Issue 6, 2023, Pages 83-98]
  • Gerdooei, M. Analytical and experimental investigation on stretch forming of an anisotropic DC04 steel sheet [Volume 12, Issue 4, 2022, Pages 69-79]
  • Ghaderi, M.R. A numerical feasibility study on using piezoelectric pumps as dosing pumps by implementing fluid-structure interaction [Volume 12, Issue 1, 2022, Pages 175-189]
  • Ghafarirad, Hamed Theoretical and Experimental Behavior Analysis of Continuous Soft Robots Consisting of Fiber-Reinforced Actuators [Volume 12, Issue 5, 2022, Pages 161-173]
  • Ghamarizadeh, Mojtaba Presenting an analytical model based on the energy method to study the plastic deformation of circular plates under uniformly repeated blast loading [Volume 12, Issue 3, 2022, Pages 33-43]

H

  • Habibi, Seyedehsan Heat transfer enhancement in a microchannel using active vibrating piezoelectric vortex generator [Volume 12, Issue 6, 2023, Pages 191-204]
  • Haghgoo, Mojtaba Experimental investigation into the energy absorption of sandwich structures with the core made of waste rubber particles under impact loading [Volume 12, Issue 6, 2023, Pages 13-23]
  • Haghighat, H. Mechanical behavior analysis of buried glass fiber reinforced epoxy composites used in pipelines and comparison with steel [Volume 12, Issue 1, 2022, Pages 35-50]
  • Haghjoo, Mohammadreza Modeling and simulation of the interaction forces between the gait rehabilitation system with a musculoskeletal-model of human body [Volume 12, Issue 6, 2023, Pages 1-12]
  • Hashemi, M. R. Experimental Study of LEX Angle Effect on Vortical Flow Over the Diamond Wing with Airfoil-Shaped Section by Using Hot-wire and Five-hole Probe [Volume 12, Issue 2, 2022, Pages 81-91]
  • Hashemi, R. Free vibration analysis of functionally graded graphene platelets – reinforced composite conical shell panels with different boundary conditions [Volume 12, Issue 2, 2022, Pages 49-64]
  • Hashemi, Sayyed Hojat Determination of energy-notch depth relationship using force-displacement diagrams in instrumented Charpy impact testing of API X65 steel [Volume 12, Issue 6, 2023, Pages 149-162]
  • Hatami, Hossein Experimental and analytical investigation of bending and impact properties of steel composite beams with high performance concrete [Volume 12, Issue 6, 2023, Pages 99-111]
  • Heiran, Fatemeh Investigating the effects of geometric and environmental parameters on the governing equations of scanning earth horizon sensor and attitude determination error analysis [Volume 12, Issue 5, 2022, Pages 73-91]
  • Heirani, Hasan Proposing an analytical relationship to calculate the damping inclination of rigid single mass impact dampers [Volume 12, Issue 6, 2023, Pages 139-148]
  • Hormozi, F. Modelling and Optimization of Geometrical Parameters in Design of the Wavy-Fin-Plate Compact Heat Exchanger by Taguchi method [Volume 12, Issue 3, 2022, Pages 89-101]
  • Hoseini Sabzevari, Seyed Amir Leakage localization in a pressurized gas pipe [Volume 12, Issue 6, 2023, Pages 181-190]
  • Hoseintabar Marzebali, Mohammad Isolation of Rotor Asymmetry Fault in Induction Machines through Sign-based Rotating Reference Frame and Generalized Goertzel Algorithm [Volume 12, Issue 6, 2023, Pages 25-33]
  • Hosseini, R. Experimental and numerical evaluation of energy absorption capacity of sandwich panel with polyurethane foam core reinforced with mineral pumice under explosive loading [Volume 12, Issue 4, 2022, Pages 27-40]
  • HOSSEINI, SEYEDVAHID Theoretical and Numerical Analysis of deformation in fixture body plates [Volume 12, Issue 3, 2022, Pages 13-32]
  • Hosseinirad, E. Modelling and Optimization of Geometrical Parameters in Design of the Wavy-Fin-Plate Compact Heat Exchanger by Taguchi method [Volume 12, Issue 3, 2022, Pages 89-101]

I

  • Izadi, Mohsen Effect of inclination angle on convection heat transfer inside porous enclosure exposed to non uniform magnetic field [Volume 12, Issue 5, 2022, Pages 253-265]

J

  • Jabbarifar, Omid Analysis of the effect of surface slope changes on the growth, motion, and coalescence of droplets in dropwise condensation [Volume 12, Issue 6, 2023, Pages 163-180]
  • Jalaly, Alireza Improving the Dynamic Properties of the Crank-Slider Mechanism with Joint Clearance Using Optimal Flexure Joint [Volume 12, Issue 3, 2022, Pages 1-12]
  • Javdani, H. Analytical and experimental investigation on stretch forming of an anisotropic DC04 steel sheet [Volume 12, Issue 4, 2022, Pages 69-79]

K

  • Kaffash Mirzarahimi, M. Experimental and numerical evaluation of energy absorption capacity of sandwich panel with polyurethane foam core reinforced with mineral pumice under explosive loading [Volume 12, Issue 4, 2022, Pages 27-40]
  • Karimian, Saeed Wind Energy potential evaluation and customizing a H-rotor Turbine based on Tehran, Zahedan and Manjil climate [Volume 12, Issue 5, 2022, Pages 267-281]
  • Karkhaneh, Parham Numerical and experimental study of orthogonal cutting bone using elastic-plastic material model and dynamic damage model [Volume 12, Issue 6, 2023, Pages 49-65]
  • Kavkar moghadam, E. Investigation of the effect of several impressive parameters on fire extinguishing in a progressive coal tunnel [Volume 12, Issue 4, 2022, Pages 117-131]
  • Kazemian, A. H. Developing a statistical model based on Markov chain for fatigue life prediction of double lap composite adhesive joints [Volume 12, Issue 4, 2022, Pages 91-102]
  • Keshavarz, Maryam Heat transfer enhancement in a microchannel using active vibrating piezoelectric vortex generator [Volume 12, Issue 6, 2023, Pages 191-204]
  • Khajvand, F. Hydraulic Hybrid Propulsion System Design and Simulation [Volume 12, Issue 2, 2022, Pages 1-12]
  • Khaledi, H. Experimental and numerical investigation on mechanical properties of bending and compressive behaviour of carbon-epoxy sandwich panel with novel M-shaped core [Volume 12, Issue 1, 2022, Pages 67-84]
  • Khaleghi, A. experimentally study of thermal resistance coefficient in closed loop pulsating heat pipe and the effect of filling ratio and evaporator to condenser length ratio on it [Volume 12, Issue 4, 2022, Pages 175-187]
  • Khaleghi, H. Development of a suitable numerical solution algorithm for the two-phase Euler-Lagrange approach with four way coupling in spray simulation [Volume 12, Issue 4, 2022, Pages 133-144]
  • Khodarahmi, H. Experimental and numerical evaluation of energy absorption capacity of sandwich panel with polyurethane foam core reinforced with mineral pumice under explosive loading [Volume 12, Issue 4, 2022, Pages 27-40]
  • Khodarahmi, Hossein Presenting an analytical model based on the energy method to study the plastic deformation of circular plates under uniformly repeated blast loading [Volume 12, Issue 3, 2022, Pages 33-43]
  • Khormpoor, S. Thermoeconomic optimization and investigation of condensation effect on Shell & Tube condenser in the presence of non-condensable gases with a new approach [Volume 12, Issue 1, 2022, Pages 159-173]
  • Khorram, A. The effect of interlayer on the microstructural characteristic and mechanical properties of diffusion welding between 17-4PH steel and Ti6Al4V alloy [Volume 12, Issue 3, 2022, Pages 45-56]
  • Khorram, A. The effect of diffusion welding parameters on the microstructural characteristics and mechanical properties of dissimilar joint between 17-4PH steel and Ti6Al4V alloy using nickel interlayer [Volume 12, Issue 4, 2022, Pages 41-54]
  • Khoshnood, Abdolmajid Distributed Coverage Control of a Multi Agent System in a Disaster Area and Localizing the Stationary Probable Targets in the Environment [Volume 12, Issue 1, 2022, Pages 1-20]
  • Khoshnood, Abdolmajid Fusion of inertial measurement system and visual navigation for unmanned aerial vehicles using Hardware in the Loop simulation [Volume 12, Issue 5, 2022, Pages 31-46]
  • Khoshvaght-Aliabadi, M. Modelling and Optimization of Geometrical Parameters in Design of the Wavy-Fin-Plate Compact Heat Exchanger by Taguchi method [Volume 12, Issue 3, 2022, Pages 89-101]
  • Khosravi, Mohammad Experimental comparison of microstructure and surface properties of Al / Al2O3 sample produced by powder metallurgy and spark plasma sintering methods [Volume 12, Issue 5, 2022, Pages 123-132]
  • Kia, Farhad Simulation and Optimizations of Truck’s Cabin Structure Exposed to Explosion [Volume 12, Issue 5, 2022, Pages 109-122]
  • Kiarasi, F. Detection of Single and Multiple Cracks in Circular Cylindrical Shells Using Modal Analysis and Wavelet Transform [Volume 12, Issue 2, 2022, Pages 13-28]
  • Koochakianfard, O. Vibration of rotating microbeams with axial motion in complex environments [Volume 12, Issue 4, 2022, Pages 1-12]

L

  • Liaghat, Gholamhosein Experimental and numerical analysis of the effect of using two perforated plates in front of the target against ballistic impact [Volume 12, Issue 5, 2022, Pages 175-187]

M

  • Maddahian, R. Development of a suitable numerical solution algorithm for the two-phase Euler-Lagrange approach with four way coupling in spray simulation [Volume 12, Issue 4, 2022, Pages 133-144]
  • Maghrebi, M. J. Investigation of Wave Characteristics and Wave Resistance of an Underwater vehicle with Control Surface Near the Free Surface [Volume 12, Issue 2, 2022, Pages 65-79]
  • Maghrebi, Mohammad Jawad Improvement aerodynamic performance of a wind turbine using injecting air jet and Taguchi optimization. [Volume 12, Issue 5, 2022, Pages 215-235]
  • Mahdavi, Seyyed Askari Simulation and Optimizations of Truck’s Cabin Structure Exposed to Explosion [Volume 12, Issue 5, 2022, Pages 109-122]
  • Mahdavikhah, M. Numerical modeling of adsorption desalination and investigation evaporator pipe lenght effect on desalinated water [Volume 12, Issue 4, 2022, Pages 145-157]
  • Majidi- Jirandehi, Ali Akbar Determination of energy-notch depth relationship using force-displacement diagrams in instrumented Charpy impact testing of API X65 steel [Volume 12, Issue 6, 2023, Pages 149-162]
  • Miralinaghi, Mahsasadat Experimental investigation into the energy absorption of sandwich structures with the core made of waste rubber particles under impact loading [Volume 12, Issue 6, 2023, Pages 13-23]
  • Mirbozorgi, Seyed Ali Numerical simulation of electroosmotic flow in two micropumps with series connection to evaluate the increase in performance of integrated micropump [Volume 12, Issue 5, 2022, Pages 237-251]
  • Mirshafiee, Saeed Experimental and numerical study on the effects of friction and specimen dimension in split Hopkinson pressure bar [Volume 12, Issue 5, 2022, Pages 1-11]
  • Mirzababaie Mostofi, Tohid Presenting an analytical model based on the energy method to study the plastic deformation of circular plates under uniformly repeated blast loading [Volume 12, Issue 3, 2022, Pages 33-43]
  • Mirzaei, M. Free vibration analysis of functionally graded graphene platelets – reinforced composite conical shell panels with different boundary conditions [Volume 12, Issue 2, 2022, Pages 49-64]
  • Moghiman, Mohammed Experimental study of solar collector with helical coil [Volume 12, Issue 5, 2022, Pages 283-292]
  • Mohajeri, M. A numerical feasibility study on using piezoelectric pumps as dosing pumps by implementing fluid-structure interaction [Volume 12, Issue 1, 2022, Pages 175-189]
  • Mohammadi, Morteza Improvement aerodynamic performance of a wind turbine using injecting air jet and Taguchi optimization. [Volume 12, Issue 5, 2022, Pages 215-235]
  • Mohammadi, R. A numerical feasibility study on using piezoelectric pumps as dosing pumps by implementing fluid-structure interaction [Volume 12, Issue 1, 2022, Pages 175-189]
  • Mohammadi, S.M.H. Technical and Economic Feasibility Study of the Use of Phase Change Materials (PCMs) in the Combination of Compression Refrigeration and Free Cooling Systems, Case Stusy: A Residential Building in Kerman [Volume 12, Issue 1, 2022, Pages 51-66]
  • Mohammadian, E. Investigation of the effect of several impressive parameters on fire extinguishing in a progressive coal tunnel [Volume 12, Issue 4, 2022, Pages 117-131]
  • Moltani Shahrakht, A. A. Investigation of Wave Characteristics and Wave Resistance of an Underwater vehicle with Control Surface Near the Free Surface [Volume 12, Issue 2, 2022, Pages 65-79]
  • Mossavi, Seyed Mohamad Erfan Experimental and numerical study on the effects of friction and specimen dimension in split Hopkinson pressure bar [Volume 12, Issue 5, 2022, Pages 1-11]

N

  • Najafi, Mahsa Free Vibration Analysis of Piezoelectric Nanobeam Based on a 2ِِD- Formulation and Non-local Elasticity Theory [Volume 12, Issue 5, 2022, Pages 59-72]
  • Najafi, M. R. Assesing whipping vibration on damage floating life of Catamaran using one way fluid-structure interaction method [Volume 12, Issue 1, 2022, Pages 21-33]
  • Naseri, Reza Experimental evaluation of back-pressure effect on workability and mechanical properties of commercially pure titanium in cold-ECAP process [Volume 12, Issue 6, 2023, Pages 67-81]
  • Nazari, M. Mathematical model of a vacuum box electric furnace for online computation: A nonlinear ordinary differential equation model and experimental verification [Volume 12, Issue 1, 2022, Pages 145-157]
  • Nazari, M. Mathematical model of a vacuum box electric furnace for online computation: A nonlinear ordinary differential equation model and experimental verification [Volume 12, Issue 1, 2022, Pages 145-157]
  • Nazemnezhad, R. Surface Energy Effect on Free Axial Vibration of Cracked Nanorods Made of Functionally Graded Materials Based on Rayleigh Theory [Volume 12, Issue 4, 2022, Pages 103-116]
  • Niazmand, H. Numerical modeling of adsorption desalination and investigation evaporator pipe lenght effect on desalinated water [Volume 12, Issue 4, 2022, Pages 145-157]
  • Niazmand, Hamid Numerical simulation of electroosmotic flow in two micropumps with series connection to evaluate the increase in performance of integrated micropump [Volume 12, Issue 5, 2022, Pages 237-251]
  • Nikzare, Javad Experimental and numerical analysis of the effect of using two perforated plates in front of the target against ballistic impact [Volume 12, Issue 5, 2022, Pages 175-187]
  • Norouzi, M. experimentally study of thermal resistance coefficient in closed loop pulsating heat pipe and the effect of filling ratio and evaporator to condenser length ratio on it [Volume 12, Issue 4, 2022, Pages 175-187]
  • Nourani, Amir Analytical and Numerical Solution for Auxetic Stent with Re-entrant Geometry and its Multi-Objective Optimization [Volume 12, Issue 6, 2023, Pages 125-137]
  • Nouri, H. Statistical analysis and multi-objective optimization of tungsten carbide alloy wirecut process using Taguchi method and genetic algorithm [Volume 12, Issue 3, 2022, Pages 69-87]

P

  • Parvaz, Hadi Theoretical and Numerical Analysis of deformation in fixture body plates [Volume 12, Issue 3, 2022, Pages 13-32]
  • Pasandidehfard, M. Numerical simulation of Lucid spherical turbine and investigation the effect of different parameters of blades on its performance [Volume 12, Issue 1, 2022, Pages 115-131]
  • Pasandideh Fard, M. Investigation of Wave Characteristics and Wave Resistance of an Underwater vehicle with Control Surface Near the Free Surface [Volume 12, Issue 2, 2022, Pages 65-79]
  • Pirkandi, J. Modeling of Solar Desalination Equipped with Phase Change Materials by Air Humidification and Dehumidification Technique [Volume 12, Issue 4, 2022, Pages 159-174]
  • Pourghasemi Hanza, Sadegh Theoretical and Experimental Behavior Analysis of Continuous Soft Robots Consisting of Fiber-Reinforced Actuators [Volume 12, Issue 5, 2022, Pages 161-173]

Q

  • Qasemi, Mahdi Numerical and experimental study of orthogonal cutting bone using elastic-plastic material model and dynamic damage model [Volume 12, Issue 6, 2023, Pages 49-65]

R

  • Raeisy, Behrooz Investigating the effects of geometric and environmental parameters on the governing equations of scanning earth horizon sensor and attitude determination error analysis [Volume 12, Issue 5, 2022, Pages 73-91]
  • Rahimpour, M. Thermal elastohydrodynamic analysis of mechanical sealsi using finite difference method [Volume 12, Issue 1, 2022, Pages 101-114]
  • Rahzani, F. A numerical feasibility study on using piezoelectric pumps as dosing pumps by implementing fluid-structure interaction [Volume 12, Issue 1, 2022, Pages 175-189]
  • Ranjbar, Seyed Faramarz Numerical investigation of the effect of an elastic wall on Heat Transfer around a cylinder within a channel [Volume 12, Issue 5, 2022, Pages 47-58]
  • Rashidi, R. Effect of Using Nano Lubricant Containing TiO2 Particles on the Performance of Noncircular Two Lobe Journal Bearings [Volume 12, Issue 3, 2022, Pages 103-116]
  • Rasoolizadeh Shooroki, A. Effect of Using Nano Lubricant Containing TiO2 Particles on the Performance of Noncircular Two Lobe Journal Bearings [Volume 12, Issue 3, 2022, Pages 103-116]
  • Razavi, Seyed Esmail Numerical investigation of the effect of an elastic wall on Heat Transfer around a cylinder within a channel [Volume 12, Issue 5, 2022, Pages 47-58]
  • Reeszadeh, Mohammad Effect of Tip Injection on Tip Leakage Flow Structure in Axial Compressor [Volume 12, Issue 5, 2022, Pages 147-160]
  • Rezaei, Seyed M. Hydraulic Hybrid Propulsion System Design and Simulation [Volume 12, Issue 2, 2022, Pages 1-12]
  • Rostamiyan, Y. Experimental and numerical investigation on mechanical properties of bending and compressive behaviour of carbon-epoxy sandwich panel with novel M-shaped core [Volume 12, Issue 1, 2022, Pages 67-84]

S

  • Sabahi Namini, Abbas Vibration Analysis of Circular Nanoplates under Nonlinear Electrostatic Excitation Considering the Surface Energy and Size Effects [Volume 12, Issue 5, 2022, Pages 133-146]
  • Sabbaghi, Mohammad Ali Energy, Exergy, Economic and Environmental Analysis (4E) of an Organic Rankine Cycle to produce power, hydrogen and desalinated water by combining geothermal energy and heat recovery [Volume 12, Issue 5, 2022, Pages 201-214]
  • Sadedel, M. Vibration of rotating microbeams with axial motion in complex environments [Volume 12, Issue 4, 2022, Pages 1-12]
  • Sadeghi, M. Experimental investigation of vibrational mode shape influence on compression behaviour of Ti-6Al-4V alloy under superimposed ultrasonic vibration [Volume 12, Issue 4, 2022, Pages 55-68]
  • Sadr, Jalaleddin Determination of energy-notch depth relationship using force-displacement diagrams in instrumented Charpy impact testing of API X65 steel [Volume 12, Issue 6, 2023, Pages 149-162]
  • Safaeifar, Hossein Proposing an analytical relationship to calculate the damping inclination of rigid single mass impact dampers [Volume 12, Issue 6, 2023, Pages 139-148]
  • Safarpour, P. Detection of Single and Multiple Cracks in Circular Cylindrical Shells Using Modal Analysis and Wavelet Transform [Volume 12, Issue 2, 2022, Pages 13-28]
  • Saffari, Hamid Analysis of the effect of surface slope changes on the growth, motion, and coalescence of droplets in dropwise condensation [Volume 12, Issue 6, 2023, Pages 163-180]
  • Saham, Seyed Sam Wind Energy potential evaluation and customizing a H-rotor Turbine based on Tehran, Zahedan and Manjil climate [Volume 12, Issue 5, 2022, Pages 267-281]
  • Sajadi, S. R. Effect of Through-thickness Variation of Mechanical Properties on Stress Distribution in API X65 Linepipe Steel: An Experimental and Numerical Investigation [Volume 12, Issue 4, 2022, Pages 81-90]
  • Sajedi, R. Modeling of Solar Desalination Equipped with Phase Change Materials by Air Humidification and Dehumidification Technique [Volume 12, Issue 4, 2022, Pages 159-174]
  • Salehi, E. Developing a statistical model based on Markov chain for fatigue life prediction of double lap composite adhesive joints [Volume 12, Issue 4, 2022, Pages 91-102]
  • Samimian Tehrani, Sh. Detection of Single and Multiple Cracks in Circular Cylindrical Shells Using Modal Analysis and Wavelet Transform [Volume 12, Issue 2, 2022, Pages 13-28]
  • Sayah Badkhor, M. Analytical and experimental study of fatigue in 7075 aluminum nanocomposite reinforced with silicon carbide particles produced by vortex method [Volume 12, Issue 1, 2022, Pages 85-100]
  • Sedehi, Sayyed Mohammad Reza Experimental comparison of microstructure and surface properties of Al / Al2O3 sample produced by powder metallurgy and spark plasma sintering methods [Volume 12, Issue 5, 2022, Pages 123-132]
  • Sefid, Mohammad Energy, Exergy, Economic and Environmental Analysis (4E) of an Organic Rankine Cycle to produce power, hydrogen and desalinated water by combining geothermal energy and heat recovery [Volume 12, Issue 5, 2022, Pages 201-214]
  • Sepehry, N. Mathematical model of a vacuum box electric furnace for online computation: A nonlinear ordinary differential equation model and experimental verification [Volume 12, Issue 1, 2022, Pages 145-157]
  • Shabgard, Hojjat Numerical simulation of electroosmotic flow in two micropumps with series connection to evaluate the increase in performance of integrated micropump [Volume 12, Issue 5, 2022, Pages 237-251]
  • Sharifnia, Mahnaz Kinematic and inverse kinematic analysis of hybrid Delta parallel robot with spherical wrist using Adptive Neuro Fuzzy Inference System [Volume 12, Issue 5, 2022, Pages 13-30]
  • Sheikhlou, Mehrdad Vibration Analysis of Circular Nanoplates under Nonlinear Electrostatic Excitation Considering the Surface Energy and Size Effects [Volume 12, Issue 5, 2022, Pages 133-146]
  • Sheykholeslami, M.R. A numerical feasibility study on using piezoelectric pumps as dosing pumps by implementing fluid-structure interaction [Volume 12, Issue 1, 2022, Pages 175-189]
  • Shokrollahi, H. Surface Energy Effect on Free Axial Vibration of Cracked Nanorods Made of Functionally Graded Materials Based on Rayleigh Theory [Volume 12, Issue 4, 2022, Pages 103-116]
  • Soleimanimehr, Hamid Investigation on the effect of laser cladding parameters of Inconel 713 LC by Metco 81VF powder on the microstructure characteristics and micro hardness of coating [Volume 12, Issue 5, 2022, Pages 93-108]

T

  • Taghvaei, Sajjad Investigating the effects of geometric and environmental parameters on the governing equations of scanning earth horizon sensor and attitude determination error analysis [Volume 12, Issue 5, 2022, Pages 73-91]
  • Taheri, Moein Extraction of force and critical time of three-dimensional manipulation of colon cancer tissue with different models of Persson friction [Volume 12, Issue 6, 2023, Pages 113-123]
  • Tahmasbi, Vahid Numerical and experimental study of orthogonal cutting bone using elastic-plastic material model and dynamic damage model [Volume 12, Issue 6, 2023, Pages 49-65]
  • Talebi, Mansour Numerical Study of Thermo Hydraulic Effect of Wire Wrap Spacer with Different Pitch in Hexagonal Fuel Assembly [Volume 12, Issue 6, 2023, Pages 205-217]
  • Talebian, S. Experimental Study and Modelling of the Blocked Force of Terfenol-D Actuator [Volume 12, Issue 3, 2022, Pages 57-67]
  • Teymouri, H. Green’s functions resulting from wave propagation in a single-layer porous isotropic foam with finite thickness [Volume 12, Issue 4, 2022, Pages 13-26]

V

  • Valefi, Z. The effect of interlayer on the microstructural characteristic and mechanical properties of diffusion welding between 17-4PH steel and Ti6Al4V alloy [Volume 12, Issue 3, 2022, Pages 45-56]
  • Valefi, Z. The effect of diffusion welding parameters on the microstructural characteristics and mechanical properties of dissimilar joint between 17-4PH steel and Ti6Al4V alloy using nickel interlayer [Volume 12, Issue 4, 2022, Pages 41-54]
  • Varedi_Koulaei, Seyyed Mojtaba Improving the Dynamic Properties of the Crank-Slider Mechanism with Joint Clearance Using Optimal Flexure Joint [Volume 12, Issue 3, 2022, Pages 1-12]
  • Vatankhah, Ramin Investigating the effects of geometric and environmental parameters on the governing equations of scanning earth horizon sensor and attitude determination error analysis [Volume 12, Issue 5, 2022, Pages 73-91]

Y

  • Yaghoubi Nejad, Yadollah Experimental comparison of microstructure and surface properties of Al / Al2O3 sample produced by powder metallurgy and spark plasma sintering methods [Volume 12, Issue 5, 2022, Pages 123-132]
  • Yarmohammadi, M.J. Assesing whipping vibration on damage floating life of Catamaran using one way fluid-structure interaction method [Volume 12, Issue 1, 2022, Pages 21-33]
  • Yazdipour, A.R. The effect of interlayer on the microstructural characteristic and mechanical properties of diffusion welding between 17-4PH steel and Ti6Al4V alloy [Volume 12, Issue 3, 2022, Pages 45-56]
  • Yazdipour, A.R. The effect of diffusion welding parameters on the microstructural characteristics and mechanical properties of dissimilar joint between 17-4PH steel and Ti6Al4V alloy using nickel interlayer [Volume 12, Issue 4, 2022, Pages 41-54]

Z

  • Zakeri, M. Modeling of Solar Desalination Equipped with Phase Change Materials by Air Humidification and Dehumidification Technique [Volume 12, Issue 4, 2022, Pages 159-174]
  • Zardst, Aidin Kinematic and inverse kinematic analysis of hybrid Delta parallel robot with spherical wrist using Adptive Neuro Fuzzy Inference System [Volume 12, Issue 5, 2022, Pages 13-30]
  • Zareei, H.R. Numerical simulation of Lucid spherical turbine and investigation the effect of different parameters of blades on its performance [Volume 12, Issue 1, 2022, Pages 115-131]
  • ZareiNezhad, M. Hydraulic Hybrid Propulsion System Design and Simulation [Volume 12, Issue 2, 2022, Pages 1-12]
  • Zare Mehrjardi, M. Effect of Using Nano Lubricant Containing TiO2 Particles on the Performance of Noncircular Two Lobe Journal Bearings [Volume 12, Issue 3, 2022, Pages 103-116]
  • Zia Shamami, M. Experimental and numerical evaluation of energy absorption capacity of sandwich panel with polyurethane foam core reinforced with mineral pumice under explosive loading [Volume 12, Issue 4, 2022, Pages 27-40]
  • Zolfaghari, Mojtaba Numerical and experimental study of orthogonal cutting bone using elastic-plastic material model and dynamic damage model [Volume 12, Issue 6, 2023, Pages 49-65]