Journal of Solid and Fluid Mechanics

Author Index

A

Abbasi, E. Design of hybrid control system for path tracking of a quadrotor subject to uncertain disturbances [Volume 11, Issue 5, 2021, Pages 17-32]
Abbaszadeh, B. Numerical and experimental investigation of deformation length in flexible roll forming process [Volume 11, Issue 6, 2022, Pages 1-14]
Abdollahi, M. Investigation of Microstructure and Mechanical Behavior of Al/SiC/CNT Surface Composite Fabricated by Friction Stir Processing [Volume 11, Issue 6, 2022, Pages 219-233]
Abedi, H. Investigation of Microstructure and Mechanical Behavior of Al/SiC/CNT Surface Composite Fabricated by Friction Stir Processing [Volume 11, Issue 6, 2022, Pages 219-233]
Abolbashari, M. H. Reliability-Based Design Optimization of Columns under Buckling Load [Volume 11, Issue 5, 2021, Pages 49-62]
Abolghasemi Golafshani, H. Numerical Study of the Effect of Passive Counter Rotating Vanes Vortex Generator on NACA 2412 Airfoil [Volume 11, Issue 6, 2022, Pages 235-252]
Adamian, A. Vibration analysis of multi-directional functionally graded nanoplates with initial geometric imperfection using quasi-3d theory based on an isogeometric approach [Volume 11, Issue 6, 2022, Pages 111-126]
Afshin, Hossein Investigating the Effect of Opening Aspect Ratio and Combustion Source Conditions on Behavior of Backdraft Phenomenon by Large Eddy Simulation [Volume 11, Issue 3, 2021, Pages 165-179]
Afshin, S. Numerical and Experimental Analysis of Spring-back Defect in Flexible Roll Forming Process using Anisotropic Yield Criteria [Volume 11, Issue 4, 2021, Pages 93-105]
Aghaei-Togh, R. Exergy Analysis and Numerical Investigation of the Effects of Nozzle Profile on the Partially-Admitted Supersonic Turbine's Performance [Volume 11, Issue 1, 2021, Pages 169-184]
Aghareb Parast, M. S. Comparing bending fatigue and fretting fatigue properties in aluminum-silicon alloy under working conditions of engine piston-ring system [Volume 11, Issue 2, 2021, Pages 157-174]
Aghighi, M.S. Investigation of natural convection heat transfer of viscoplastic nanofluids-Casson model in a square enclosure [Volume 11, Issue 4, 2021, Pages 165-178]
Ahmadi, H. Fractional-order super-twisting nonsingular terminal sliding mode control of 2-DOF robotics manipulators [Volume 11, Issue 2, 2021, Pages 41-56]
Ajam, H. Optimal design of a three-outlet channel with specified outlet flow rates using the topology optimization method [Volume 11, Issue 1, 2021, Pages 153-168]
Akbari, A. Computational homogenization to study the effect of microscopic cracks on the macroscopic strength of polycrystalline materials [Volume 11, Issue 1, 2021, Pages 59-71]
Alizade, A. Investigation of Microstructure and Mechanical Behavior of Al/SiC/CNT Surface Composite Fabricated by Friction Stir Processing [Volume 11, Issue 6, 2022, Pages 219-233]
Alizadeh Momen, S. Experimental Investigation of Indoor Cooking Using an Indirect Solar Cooker Integrated with Heat Storage Materials [Volume 11, Issue 3, 2021, Pages 207-219]
Aminzadeh, A. Dynamic Modeling and Controller Design for a Space Vehicle with Fuel Sloshing [Volume 11, Issue 2, 2021, Pages 25-40]
Amirabadi, H. Using of Machine Vision System for Offline Setup Cast parts on CNC Milling Machine with Industrial Application Approach [Volume 11, Issue 1, 2021, Pages 239-255]
Amjadi, A. Dynamic Analysis and Control of Two Phase Flow Instability in Boilnig Channel [Volume 11, Issue 5, 2021, Pages 165-181]
Amoozgar, M.R. Limit cycle oscillations in swept wings based on fully intrinsic equations and considering the static stall effects [Volume 11, Issue 6, 2022, Pages 207-217]
Arabi, A. Application of Finite-Difference Based Lattice Boltzmann Method for Numerical Simulation of Nanofluid Turbulent Convection in channel [Volume 11, Issue 1, 2021, Pages 325-350]
Arabi, H. Presenting a new method for evaluating friction effects at extrusion die entrance based on combination of the open die backward extrusion and ring compression tests [Volume 11, Issue 1, 2021, Pages 73-88]
Ashrafi, N. Dynamic Behavior of Articulated Pipes Conveying Fluid With Harmonic Velocity Using the Method of Multiple time scales [Volume 11, Issue 3, 2021, Pages 53-70]
Azadi, M. Comparing bending fatigue and fretting fatigue properties in aluminum-silicon alloy under working conditions of engine piston-ring system [Volume 11, Issue 2, 2021, Pages 157-174]

B

Babaei, H. Experimental investigation of large plastic deformation of single- and multi-layered circular aluminum plates under repeated uniform impulsive loading [Volume 11, Issue 1, 2021, Pages 123-137]
Babaei, H. Investigation of the influence of standoff distance of explosive charge on the response of circular metallic plates [Volume 11, Issue 2, 2021, Pages 175-191]
Babaei, H. Experimental Investigation into the Behaviour of FMLs Containing Nanoparticles under Repeated Low-velocity Impact [Volume 11, Issue 6, 2022, Pages 187-206]
Babaei, M. J. Active vibration control of rotating FGM conical shell via piezoelectric patches [Volume 11, Issue 1, 2021, Pages 13-29]
Badparva, H. Numerical and experimental investigation of deformation length in flexible roll forming process [Volume 11, Issue 6, 2022, Pages 1-14]
Baghaee, M. Active Vibration control and reduction of shear force of 5MW wind turbine with the help of gyroscope actuator [Volume 11, Issue 2, 2021, Pages 99-118]
Bagheri, A. Sensitivity Analysis of Power Output from Piezoelectric Vibration Constant-Voltage Generator using VBSA and PAWN Method [Volume 11, Issue 2, 2021, Pages 209-218]
Bagheri Tofighi, M. Numerical Investigation of the Effects of Material and Number of Metal Layers on Low-Velocity Impact Response of Metal Laminates [Volume 11, Issue 4, 2021, Pages 1-14]
Bahrainian, Seyed S. Effect of Air-Fuel Equivalence Ratio on Combustion Process in Furnace of Razi Petrochemical Company’s Ammonia Unit [Volume 11, Issue 5, 2021, Pages 119-132]
Bahrainian, Seyed S. Development of an applied relationship for pressure drop estimation in tri-cone drill bit using Bingham rheological model [Volume 11, Issue 6, 2022, Pages 45-57]
Baqeri Kazazi, Shirin Enhancing the performance of Bi-stable Energy Harvester using Chaos control [Volume 11, Issue 2, 2021, Pages 1-14]
Barati, F. Experimental Analysis on the Geometric Parameters of the Composite Metal Matrix Patch to Repair Cracked Aluminum Part [Volume 11, Issue 3, 2021, Pages 85-96]
Bashirnezhad Dehghan, H. Crack analysis in diffusion-generalized thermoelasticity problems using the extended finite element method [Volume 11, Issue 5, 2021, Pages 63-82]
Bazargan lari, Y. Frequency Analysis of Bi-directional Porous Functionally Graded Beams with Variable cross section on Elastic Foundation using Reddy Third Order Shear Deformation Theory [Volume 11, Issue 3, 2021, Pages 97-118]
Bazazzadeh, M. Numerical Study of Dielectric Barrier Discharge (DBD) Plasma Actuators on Separation Control of Supersonic Flow [Volume 11, Issue 4, 2021, Pages 133-148]
Bazazzadeh, M. Prediction of splitting airfoils horizontal spacing effects on loss distribution in an array distortion generator based on comparison of RANS, URANS and DES [Volume 11, Issue 5, 2021, Pages 211-223]
Beigmoradi, S. Numerical Investigation and Enhancement of Flushing Performance in the Micro-Electro Discharge Machining by Considering the Hole Depth and Dielectric Fluid [Volume 11, Issue 1, 2021, Pages 111-122]
Bohlooli, H. Feasibility of Aluminum-Copper Bimetallic Bar Production by Combined Equal Channel Angular Pressing and Direct Extrusion Process [Volume 11, Issue 2, 2021, Pages 193-207]

C

Cheraqi, A. Exergy Analysis and Numerical Investigation of the Effects of Nozzle Profile on the Partially-Admitted Supersonic Turbine's Performance [Volume 11, Issue 1, 2021, Pages 169-184]
Cheshm Avar, A. Sensitivity Analysis of Power Output from Piezoelectric Vibration Constant-Voltage Generator using VBSA and PAWN Method [Volume 11, Issue 2, 2021, Pages 209-218]
Chitgarha, F. Identification of the Droplet Group Combustion Formation Region by the Flame Index Parameter in the Laminar Counterflow Spray [Volume 11, Issue 1, 2021, Pages 212-199]

D

Dadgar Asl, Y. Numerical and Experimental Analysis of Spring-back Defect in Flexible Roll Forming Process using Anisotropic Yield Criteria [Volume 11, Issue 4, 2021, Pages 93-105]
Dadgar Asl, Y. Numerical and experimental investigation of deformation length in flexible roll forming process [Volume 11, Issue 6, 2022, Pages 1-14]
Dadrasi, A. Study of stress-strain behavior of cracked polycrystalline boron carbide structure in the presence of crack arrest and in different temperature conditions by molecular dynamics method [Volume 11, Issue 5, 2021, Pages 95-105]
Daneh Dezfuli, A.R. Effect of Air-Fuel Equivalence Ratio on Combustion Process in Furnace of Razi Petrochemical Company’s Ammonia Unit [Volume 11, Issue 5, 2021, Pages 119-132]
Davari, S. Experimental study of the effects of adding methylated homopolymer to gasoline on the engine performance and pollutant emissions [Volume 11, Issue 5, 2021, Pages 199-210]
Davoodabadi Farahani, Somayeh Effect of Environmental Conditions on Solar Chimney:Exergy and Economic Analysis and Choosing the Appropriate City [Volume 11, Issue 1, 2021, Pages 351-364]
Dehdari, M. Effect of state feedback controller on dynamic behavior of a rotor supported by active magnetic bearings [Volume 11, Issue 6, 2022, Pages 15-26]
Dehghani, D. Investigation of operational parameters on the motional behavior and maximum particle levitated density in ultrasonic levitation [Volume 11, Issue 3, 2021, Pages 71-84]
Dehghan Manshadi, M. Prediction of splitting airfoils horizontal spacing effects on loss distribution in an array distortion generator based on comparison of RANS, URANS and DES [Volume 11, Issue 5, 2021, Pages 211-223]
Dehghanzadeh Bafghi, M. Numerical analysis of mixed electroosmotic/pressure driven flow using an improved weakly compressible Smoothed Particle Hydrodynamics method [Volume 11, Issue 4, 2021, Pages 121-131]

E

Ebrahimi, R. Exergy Analysis and Numerical Investigation of the Effects of Nozzle Profile on the Partially-Admitted Supersonic Turbine's Performance [Volume 11, Issue 1, 2021, Pages 169-184]
Eftekhari, M. Analysis of FGM Rotating Disk Based on Non-Fourier Heat Conduction Model under Electromagnetic Field [Volume 11, Issue 4, 2021, Pages 53-70]
Eftekhari, Seyyed E. Determination of Johnson-Cook damage model constants for commercial pure copper sheet by tensile testing on notched specimens [Volume 11, Issue 1, 2021, Pages 97-110]
Eshagh Nimvari, M. Computational Fluid Dynamics Simulation of Ljungstrom Rotary Preheater in Steam Power Plant for Leakage Assessment Using Porous Media Approach [Volume 11, Issue 4, 2021, Pages 179-190]
Esmaeili, A. Sensitivity Analysis of Power Output from Piezoelectric Vibration Constant-Voltage Generator using VBSA and PAWN Method [Volume 11, Issue 2, 2021, Pages 209-218]
Etemadi, E. Experimental and numerical analysis of effective geometrical parameters for energy absorbing of the structures with negative Poisson's ratio made from aluminium alloy 1100 [Volume 11, Issue 1, 2021, Pages 311-324]

F

Fadavi, A. Experimental Study on the Pressure Drop and Efficiency of an Aero-Cyclone with Guide Vanes on the Vortex Finder [Volume 11, Issue 3, 2021, Pages 181-193]
Fakhari, M. Health Condition Monitoring of railway wheels through vibration analysis using the moving RMS [Volume 11, Issue 4, 2021, Pages 85-92]
Fallahi, M. Dynamic Analysis and Control of Two Phase Flow Instability in Boilnig Channel [Volume 11, Issue 5, 2021, Pages 165-181]
Farahmand Amin, J. Numerical Investigation of Installed Rod Effects in Front of an ASymmetric Blade section of Vertical Axis Wind Trubine [Volume 11, Issue 4, 2021, Pages 107-120]
Farajollahi, A.H. Size-dependent vibration of rotating rayleigh microbeams with variable cross-section in complex environments [Volume 11, Issue 6, 2022, Pages 159-171]
Farhanieh, Bijan Investigating the Effect of Opening Aspect Ratio and Combustion Source Conditions on Behavior of Backdraft Phenomenon by Large Eddy Simulation [Volume 11, Issue 3, 2021, Pages 165-179]
Fathi-Asgarabad, E. Experimental study of low velocity impact effect on fracture energy of API X65 steel using drop weight tear test [Volume 11, Issue 2, 2021, Pages 57-71]
Fazeli, H. Vibration analysis of multi-directional functionally graded nanoplates with initial geometric imperfection using quasi-3d theory based on an isogeometric approach [Volume 11, Issue 6, 2022, Pages 111-126]
Forghani, M.A. Frequency Analysis of Bi-directional Porous Functionally Graded Beams with Variable cross section on Elastic Foundation using Reddy Third Order Shear Deformation Theory [Volume 11, Issue 3, 2021, Pages 97-118]
Foroozmehr, E. Numerical Simulation and Visualization of Gas-Metal Powder Flow in Laser Cladding Process [Volume 11, Issue 5, 2021, Pages 183-197]

G

Gandjalikhan Nassab, Seyyed A. Performance optimization of organic Rankin cycle (ORC) based on comparative study of Box –Behnken and central Composite design methods [Volume 11, Issue 2, 2021, Pages 219-232]
Garousi Farshi, L. Thermodynamic analysis of using compressor in absorption heat transformers with ammonia-lithium nitrate and ammonia sodium thiocyanate as working fluids [Volume 11, Issue 3, 2021, Pages 221-234]
Gavagsaz Ghoachani, R. Enhancing the performance of Bi-stable Energy Harvester using Chaos control [Volume 11, Issue 2, 2021, Pages 1-14]
Ghajar, R. Coupling of Dafalias-Popov’s Two-Surface Plasticity with Notch Stress-Strain Estimation Methods in Plane Stress Problems under Monotonic Uniaxial Loading [Volume 11, Issue 2, 2021, Pages 15-24]
Ghamari, V. Thermoeconomic evaluation of drinking water production by using different prime mover on combined production of cooling, heating, power, and freshwater [Volume 11, Issue 1, 2021, Pages 365-379]
Ghamarizadeh, M. Dynamic response of sandwich circular blast shield with tubular cores under free blast load [Volume 11, Issue 4, 2021, Pages 71-83]
Ghasemi, A. Optimization of Heating Element Profile of Ljungstrom Using Discrete Orthogonal Functions and Adjoint Method [Volume 11, Issue 4, 2021, Pages 149-163]
Ghazi, M. Modeling and analysis of total site cogeneration of heat and power from an exergoeconomic approach in a 100MW case study [Volume 11, Issue 5, 2021, Pages 247-258]
Gheibi, A. Application of Finite-Difference Based Lattice Boltzmann Method for Numerical Simulation of Nanofluid Turbulent Convection in channel [Volume 11, Issue 1, 2021, Pages 325-350]
Gholinia, S. Drone Propeller Analysis by Blade Element Momentum and Numerical Methodes for Autonmus Submarine Veichle [Volume 11, Issue 5, 2021, Pages 225-245]
Gholizade, K. Damped vibration of tapered and bidirectional graded plate subjected to arbitrary radial load rested on elastic medium [Volume 11, Issue 5, 2021, Pages 107-118]
Ghoreishi, M. Numerical Investigation and Enhancement of Flushing Performance in the Micro-Electro Discharge Machining by Considering the Hole Depth and Dielectric Fluid [Volume 11, Issue 1, 2021, Pages 111-122]
Goharshadi, M. Using JST and CUSP schemes in aerodynamic optimization based on discrete adjoint method in a viscous all-speed solver developed on unstructured grid [Volume 11, Issue 3, 2021, Pages 1-14]
Golparvar, H. Experimental and Numerical Investigation of Water Impact on Hull of Seaplane UAV [Volume 11, Issue 1, 2021, Pages 227-238]
Gorji, M. Experimental investigation of the effect of parallel-flow primary nozzle on the performance of the ejector [Volume 11, Issue 3, 2021, Pages 235-244]

H

Hadipour Goudarzi, R. Drone Propeller Analysis by Blade Element Momentum and Numerical Methodes for Autonmus Submarine Veichle [Volume 11, Issue 5, 2021, Pages 225-245]
Hadipour Goudarzi, R. The Calculation of Trimaran Vessel Resistance and Uncertainty estimation in Calm water condition by Experimental and Numerical methods [Volume 11, Issue 6, 2022, Pages 253-271]
Hajabdollahi, H. Thermoeconomic evaluation of drinking water production by using different prime mover on combined production of cooling, heating, power, and freshwater [Volume 11, Issue 1, 2021, Pages 365-379]
Hajialyani, O. Analysis of fluid-structure interaction in a pipeline with symmetric and asymmetric branching conveying turbulent flow: A case study [Volume 11, Issue 2, 2021, Pages 119-131]
Hajidavalloo, E. Development of an applied relationship for pressure drop estimation in tri-cone drill bit using Bingham rheological model [Volume 11, Issue 6, 2022, Pages 45-57]
Haji Esmaeili, M. H. Comparing bending fatigue and fretting fatigue properties in aluminum-silicon alloy under working conditions of engine piston-ring system [Volume 11, Issue 2, 2021, Pages 157-174]
Hajjary, M. Computational Fluid Dynamics Simulation of Ljungstrom Rotary Preheater in Steam Power Plant for Leakage Assessment Using Porous Media Approach [Volume 11, Issue 4, 2021, Pages 179-190]
Hasani, M. Dynamic Modeling and Controller Design for a Space Vehicle with Fuel Sloshing [Volume 11, Issue 2, 2021, Pages 25-40]
Hasani, S. Feature Extraction Based on Deep Learning for Mechanical Bearing Fault Detection and Classification in Squirrel Cage Induction Machine [Volume 11, Issue 5, 2021, Pages 33-48]
Hashemi, Seyyed H. Experimental study of low velocity impact effect on fracture energy of API X65 steel using drop weight tear test [Volume 11, Issue 2, 2021, Pages 57-71]
Hassani, A.H. Experimental and fractography investigation of notch depth effect by instrumented instrumented impact pendulum in 7075 Aluminum alloy [Volume 11, Issue 3, 2021, Pages 15-36]
Hassani, M. Prediction of splitting airfoils horizontal spacing effects on loss distribution in an array distortion generator based on comparison of RANS, URANS and DES [Volume 11, Issue 5, 2021, Pages 211-223]
Havasi, M. Identification of the Droplet Group Combustion Formation Region by the Flame Index Parameter in the Laminar Counterflow Spray [Volume 11, Issue 1, 2021, Pages 212-199]
Heshmati, M. Analysis of fluid-structure interaction in a pipeline with symmetric and asymmetric branching conveying turbulent flow: A case study [Volume 11, Issue 2, 2021, Pages 119-131]
Heydari, A. Damped vibration of tapered and bidirectional graded plate subjected to arbitrary radial load rested on elastic medium [Volume 11, Issue 5, 2021, Pages 107-118]
Heydari, H.R. Investigating the ratcheting and shakedown behavior of a carbon steel sheet under cyclic thermal loading and axial loading using Bree diagram [Volume 11, Issue 6, 2022, Pages 143-157]
Hojatian, Sh. Experimental investigation of effect of inlet direction and height on flow pattern and thermal comfort conditions under personalized confluent jets ventilation system [Volume 11, Issue 3, 2021, Pages 195-205]
Hoseintabar Marzebali, M. Feature Extraction Based on Deep Learning for Mechanical Bearing Fault Detection and Classification in Squirrel Cage Induction Machine [Volume 11, Issue 5, 2021, Pages 33-48]
Hosseini, Kh. Using Collocation Discrete Least Squares Meshless method in solving governing equations for non-Newtonian fluids by Herschel- Bulkley model [Volume 11, Issue 2, 2021, Pages 247-259]
Hosseini, M. Analysis of FGM Rotating Disk Based on Non-Fourier Heat Conduction Model under Electromagnetic Field [Volume 11, Issue 4, 2021, Pages 53-70]
Hosseini, Seyed M. Investigation of parameters affecting the roughness and cylindricality of holes in PLA parts made of 3D printing by fused deposition modeling process using response surface method [Volume 11, Issue 3, 2021, Pages 119-133]
Hosseini, Seyed V. Investigation of the Effect of Crystallographic Orientation and Non-Rigid Tool on Nickel Hardness in Nanoindentation Process using Molecular Dynamics Simulation [Volume 11, Issue 1, 2021, Pages 213-226]
Hosseini Farrash, Seyyed M. Investigation of dry sliding behavior of metal on nanocomposites reinforced with carbon nanotubes and nanoclay [Volume 11, Issue 6, 2022, Pages 85-95]
Hosseini-Sianaki, A. Vibration analysis of multi-directional functionally graded nanoplates with initial geometric imperfection using quasi-3d theory based on an isogeometric approach [Volume 11, Issue 6, 2022, Pages 111-126]
Hosseinzadeh, A. Experimental and fractography investigation of notch depth effect by instrumented instrumented impact pendulum in 7075 Aluminum alloy [Volume 11, Issue 3, 2021, Pages 15-36]
Hosseinzadeh, M. Experimental Investigation of Indoor Cooking Using an Indirect Solar Cooker Integrated with Heat Storage Materials [Volume 11, Issue 3, 2021, Pages 207-219]
Hosseinzadeh, M. Thermodynamic Analysis of an Evacuated Tube Solar Cooker under Different Operating Conditions [Volume 11, Issue 5, 2021, Pages 259-268]
Hossinalipour, S. M. Thermo-Fluid Investigation on the Effect of Rotation on Film Cooling Performace at Pressure & Suction Side of the Leading-Edge of a Gas Turbine Blade [Volume 11, Issue 5, 2021, Pages 133-148]
Houshmand, B. Using of Machine Vision System for Offline Setup Cast parts on CNC Milling Machine with Industrial Application Approach [Volume 11, Issue 1, 2021, Pages 239-255]

I

Imani, K. Analysis of axial symmetric circular cylindrical shell vibrations using high-order theory to approximate transverse displacement by finite element [Volume 11, Issue 2, 2021, Pages 87-97]
Imani Nejad, Z. Comparison the Performance of Rajagopal Musculoskeletal Model and its Updated Versions in Prediction of the Knee Joint Contact Forces During Walking and Squatting [Volume 11, Issue 5, 2021, Pages 83-94]
Irani Rahagi, M. Active vibration control of rotating FGM conical shell via piezoelectric patches [Volume 11, Issue 1, 2021, Pages 13-29]
Izadi, M. Experimental investigation of effect of inlet direction and height on flow pattern and thermal comfort conditions under personalized confluent jets ventilation system [Volume 11, Issue 3, 2021, Pages 195-205]

J

Jabbari, A. Investigation of operational parameters on the motional behavior and maximum particle levitated density in ultrasonic levitation [Volume 11, Issue 3, 2021, Pages 71-84]
Jafari, A. A. Active vibration control of rotating FGM conical shell via piezoelectric patches [Volume 11, Issue 1, 2021, Pages 13-29]
Jafari, A. A. Nonlinear Vibration Analysis of Asymmetric Rotor with Misaligned Coupling Using Timoshenko Beam Theory [Volume 11, Issue 3, 2021, Pages 37-51]
Jafari, A.A. Free nonlinear vibration analyzing of annular sector plate in contact with fluid [Volume 11, Issue 2, 2021, Pages 73-86]
Jafari, M. Investigation of dry sliding behavior of metal on nanocomposites reinforced with carbon nanotubes and nanoclay [Volume 11, Issue 6, 2022, Pages 85-95]
Jafariniasar, M. Active vibration control of rotating FGM conical shell via piezoelectric patches [Volume 11, Issue 1, 2021, Pages 13-29]
Jahanshahi Javaran, E. Performance optimization of organic Rankin cycle (ORC) based on comparative study of Box –Behnken and central Composite design methods [Volume 11, Issue 2, 2021, Pages 219-232]
Jamshidi, H. Nonlinear Vibration Analysis of Asymmetric Rotor with Misaligned Coupling Using Timoshenko Beam Theory [Volume 11, Issue 3, 2021, Pages 37-51]
Jamshidi, Z. Thermo-Fluid Investigation on the Effect of Rotation on Film Cooling Performace at Pressure & Suction Side of the Leading-Edge of a Gas Turbine Blade [Volume 11, Issue 5, 2021, Pages 133-148]

K

Kalantar, V. Experimental study of the effect of position and intensity of a constant magnetic field on the forced convection heat transfer of Fe2O3 / water nanofluid in the developing thermal region [Volume 11, Issue 1, 2021, Pages 43-58]
Kami, Abdol V. Assessment of Galling Wear in Automobile Deep Drawing Dies Using Slider-on-Flat-Surface Wear Test [Volume 11, Issue 3, 2021, Pages 151-164]
Karami, S. Drone Propeller Analysis by Blade Element Momentum and Numerical Methodes for Autonmus Submarine Veichle [Volume 11, Issue 5, 2021, Pages 225-245]
Karami, S. The Calculation of Trimaran Vessel Resistance and Uncertainty estimation in Calm water condition by Experimental and Numerical methods [Volume 11, Issue 6, 2022, Pages 253-271]
Kargar, H. Identification of crack in beams under moving forces using Hilbert-Huang transform [Volume 11, Issue 6, 2022, Pages 173-185]
Kargarsharifabad, H. Experimental study of the effect of position and intensity of a constant magnetic field on the forced convection heat transfer of Fe2O3 / water nanofluid in the developing thermal region [Volume 11, Issue 1, 2021, Pages 43-58]
Karimi, H. Exergy Analysis and Numerical Investigation of the Effects of Nozzle Profile on the Partially-Admitted Supersonic Turbine's Performance [Volume 11, Issue 1, 2021, Pages 169-184]
Karimi, M. The effect of aluminide coating on the creep life of Rene 80 nickel base superalloy [Volume 11, Issue 2, 2021, Pages 145-156]
Kasaei, M. M. Numerical and experimental investigation of deformation length in flexible roll forming process [Volume 11, Issue 6, 2022, Pages 1-14]
Kazemian, M. E. Performance optimization of organic Rankin cycle (ORC) based on comparative study of Box –Behnken and central Composite design methods [Volume 11, Issue 2, 2021, Pages 219-232]
Kazemzadeh Parsi, M.J. Frequency Analysis of Bi-directional Porous Functionally Graded Beams with Variable cross section on Elastic Foundation using Reddy Third Order Shear Deformation Theory [Volume 11, Issue 3, 2021, Pages 97-118]
Khaledi, H. Experimental Investigation of High-velocity Impact Effects on Composite Sandwich Panel with M-Type Lattice Core Made of Carbon Fiber Reinforced by Nano-SiO2 [Volume 11, Issue 6, 2022, Pages 127-142]
Khalili, Kh. Using of Machine Vision System for Offline Setup Cast parts on CNC Milling Machine with Industrial Application Approach [Volume 11, Issue 1, 2021, Pages 239-255]
Khalili, Kh. Feasibility of Aluminum-Copper Bimetallic Bar Production by Combined Equal Channel Angular Pressing and Direct Extrusion Process [Volume 11, Issue 2, 2021, Pages 193-207]
Khalili, Kh. Comparison the Performance of Rajagopal Musculoskeletal Model and its Updated Versions in Prediction of the Knee Joint Contact Forces During Walking and Squatting [Volume 11, Issue 5, 2021, Pages 83-94]
Khalkhali, A. Numerical simulation and optimization of truck’s cabin strength [Volume 11, Issue 4, 2021, Pages 15-31]
Khamisi, Sh. Effect of Air-Fuel Equivalence Ratio on Combustion Process in Furnace of Razi Petrochemical Company’s Ammonia Unit [Volume 11, Issue 5, 2021, Pages 119-132]
Khandaei, M. Presenting a new method for evaluating friction effects at extrusion die entrance based on combination of the open die backward extrusion and ring compression tests [Volume 11, Issue 1, 2021, Pages 73-88]
Khazaeeneghad, A. Effect of Environmental Conditions on Solar Chimney:Exergy and Economic Analysis and Choosing the Appropriate City [Volume 11, Issue 1, 2021, Pages 351-364]
Khodarahmi, H. Experimental investigation of large plastic deformation of single- and multi-layered circular aluminum plates under repeated uniform impulsive loading [Volume 11, Issue 1, 2021, Pages 123-137]
Khoramishad, H. Numerical Investigation of the Effects of Material and Number of Metal Layers on Low-Velocity Impact Response of Metal Laminates [Volume 11, Issue 4, 2021, Pages 1-14]
Khorram, A. Investigation on the effect of laser cladding parameters on the geometrical characteristics and microhardness of 17-4 steel [Volume 11, Issue 2, 2021, Pages 133-143]
Khorshidi, K. Solution of the Characteristic Frequency Equations of Levy-type Sandwich Panels with Auxetic Honeycomb Core based on the Improved Reddy’s Third-order Theory [Volume 11, Issue 1, 2021, Pages 291-310]
Khoshkhoo, R. Numerical Study of Dielectric Barrier Discharge (DBD) Plasma Actuators on Separation Control of Supersonic Flow [Volume 11, Issue 4, 2021, Pages 133-148]
Khoshnood, Abdol M. Dynamic Modeling and Controller Design for a Space Vehicle with Fuel Sloshing [Volume 11, Issue 2, 2021, Pages 25-40]
Khosravi, M. Investigation of parameters affecting the roughness and cylindricality of holes in PLA parts made of 3D printing by fused deposition modeling process using response surface method [Volume 11, Issue 3, 2021, Pages 119-133]
Khosravi Khor, H. Experimental measurement of fracture energy of API X65 steel using drop weight tear test equipped with accelerometer [Volume 11, Issue 1, 2021, Pages 89-96]
Kianifar, A. Experimental Investigation of Indoor Cooking Using an Indirect Solar Cooker Integrated with Heat Storage Materials [Volume 11, Issue 3, 2021, Pages 207-219]

L

Lakhi, M. Investigation of parameters affecting the roughness and cylindricality of holes in PLA parts made of 3D printing by fused deposition modeling process using response surface method [Volume 11, Issue 3, 2021, Pages 119-133]
Livani, M. The effect of aluminide coating on the creep life of Rene 80 nickel base superalloy [Volume 11, Issue 2, 2021, Pages 145-156]

M

Maghrebi, M.J. Numerical Investigation of Installed Rod Effects in Front of an ASymmetric Blade section of Vertical Axis Wind Trubine [Volume 11, Issue 4, 2021, Pages 107-120]
Maghrebi, M.J. Effect of Plate Numbers on Optimal Condition of Gasket Heat Exchanger with Graphene-Carbon Nanotube Hybrid [Volume 11, Issue 5, 2021, Pages 149-163]
Maghsoudpour, َA. Free nonlinear vibration analyzing of annular sector plate in contact with fluid [Volume 11, Issue 2, 2021, Pages 73-86]
Mahaki, M. B. Numerical Simulation and Visualization of Gas-Metal Powder Flow in Laser Cladding Process [Volume 11, Issue 5, 2021, Pages 183-197]
Mahdavi, Seyyed A. Numerical simulation and optimization of truck’s cabin strength [Volume 11, Issue 4, 2021, Pages 15-31]
Mahdiyar, N. Investigation of the Effect of Crystallographic Orientation and Non-Rigid Tool on Nickel Hardness in Nanoindentation Process using Molecular Dynamics Simulation [Volume 11, Issue 1, 2021, Pages 213-226]
Mahdizadeh Rokhi, M. Crack analysis in diffusion-generalized thermoelasticity problems using the extended finite element method [Volume 11, Issue 5, 2021, Pages 63-82]
Mahjoubmoghadas, S. Investigation effect of wetted surface of cylindrical shell on vibrational frequency in different immersion depth numerically and experimentally [Volume 11, Issue 6, 2022, Pages 97-109]
Mahmoudkhani, S. Flutter analysis of the panel treated with integrated and segmented constrained layer damping [Volume 11, Issue 3, 2021, Pages 245-261]
Mahmoudkhani, S. Investigating the performance of the damped vibration absorber made of a three-layer beam with a viscoelastic core [Volume 11, Issue 5, 2021, Pages 1-16]
Malekzade Fard, K. Free vibration analysis of functionally graded beam with transverse crack using Timoshenko and higher order shear deformation theory [Volume 11, Issue 1, 2021, Pages 275-289]
Mamandi, Ahmad Dynamic Study of a Microbeam Conveying Fluid Flow on a Viscoelastic-Pasternak Foundation and Subjected to an Axial Load using Modified Couple Stress Theory [Volume 11, Issue 1, 2021, Pages 257-273]
Managheb, Sayed A. M. Design of hybrid control system for path tracking of a quadrotor subject to uncertain disturbances [Volume 11, Issue 5, 2021, Pages 17-32]
Maraki, M.R. Feasibility of Aluminum-Copper Bimetallic Bar Production by Combined Equal Channel Angular Pressing and Direct Extrusion Process [Volume 11, Issue 2, 2021, Pages 193-207]
Maraki, M.R. Experimental and fractography investigation of notch depth effect by instrumented instrumented impact pendulum in 7075 Aluminum alloy [Volume 11, Issue 3, 2021, Pages 15-36]
Marashi, Seyed M. Size-dependent vibration of rotating rayleigh microbeams with variable cross-section in complex environments [Volume 11, Issue 6, 2022, Pages 159-171]
Mashayekh, V. Feature Extraction Based on Deep Learning for Mechanical Bearing Fault Detection and Classification in Squirrel Cage Induction Machine [Volume 11, Issue 5, 2021, Pages 33-48]
Mashayekhi, H. Feature Extraction Based on Deep Learning for Mechanical Bearing Fault Detection and Classification in Squirrel Cage Induction Machine [Volume 11, Issue 5, 2021, Pages 33-48]
Masoumi, H. Investigation of natural convection heat transfer of viscoplastic nanofluids-Casson model in a square enclosure [Volume 11, Issue 4, 2021, Pages 165-178]
Mazdak, S. Optimization of ultrasonic transducer horn geometry with vibrational-thermal performance improvement approach [Volume 11, Issue 1, 2021, Pages 31-42]
Mazdak, S. Investigation of operational parameters on the motional behavior and maximum particle levitated density in ultrasonic levitation [Volume 11, Issue 3, 2021, Pages 71-84]
Mehrabi moheb, Alireza Dynamic Study of a Microbeam Conveying Fluid Flow on a Viscoelastic-Pasternak Foundation and Subjected to an Axial Load using Modified Couple Stress Theory [Volume 11, Issue 1, 2021, Pages 257-273]
Mirzababaee, Seyyed M. Experimental Investigation of Indoor Cooking Using an Indirect Solar Cooker Integrated with Heat Storage Materials [Volume 11, Issue 3, 2021, Pages 207-219]
Mirzababaee, Seyyed M. Thermodynamic Analysis of an Evacuated Tube Solar Cooker under Different Operating Conditions [Volume 11, Issue 5, 2021, Pages 259-268]
Mirzababaie Mostofi, T. Experimental investigation of large plastic deformation of single- and multi-layered circular aluminum plates under repeated uniform impulsive loading [Volume 11, Issue 1, 2021, Pages 123-137]
Mirzababaie Mostofi, T. Investigation of the influence of standoff distance of explosive charge on the response of circular metallic plates [Volume 11, Issue 2, 2021, Pages 175-191]
Mirzababaie Mostofi, T. Dynamic response of sandwich circular blast shield with tubular cores under free blast load [Volume 11, Issue 4, 2021, Pages 71-83]
Mirzababaie Mostofi, T. Experimental Investigation into the Behaviour of FMLs Containing Nanoparticles under Repeated Low-velocity Impact [Volume 11, Issue 6, 2022, Pages 187-206]
Mirzaei, M. Using JST and CUSP schemes in aerodynamic optimization based on discrete adjoint method in a viscous all-speed solver developed on unstructured grid [Volume 11, Issue 3, 2021, Pages 1-14]
Mobini, K. Experimental investigation of the effect of parallel-flow primary nozzle on the performance of the ejector [Volume 11, Issue 3, 2021, Pages 235-244]
Mohammadi, A. Effect of Gas injector direction on mixture formation in a spark ignition engine [Volume 11, Issue 2, 2021, Pages 233-246]
Mohammadi, A. Design of hybrid control system for path tracking of a quadrotor subject to uncertain disturbances [Volume 11, Issue 5, 2021, Pages 17-32]
Mohammadi, J. Dynamic Behavior of Articulated Pipes Conveying Fluid With Harmonic Velocity Using the Method of Multiple time scales [Volume 11, Issue 3, 2021, Pages 53-70]
Mohammadi, N. Nonlinear Vibration Analysis of Asymmetric Rotor with Misaligned Coupling Using Timoshenko Beam Theory [Volume 11, Issue 3, 2021, Pages 37-51]
Mohammadian, Esmail Investigating the Effect of Opening Aspect Ratio and Combustion Source Conditions on Behavior of Backdraft Phenomenon by Large Eddy Simulation [Volume 11, Issue 3, 2021, Pages 165-179]
Mohammadi Firuzjaei, S. Presenting a new method for evaluating friction effects at extrusion die entrance based on combination of the open die backward extrusion and ring compression tests [Volume 11, Issue 1, 2021, Pages 73-88]
Mohammadi Ghazi Jahani, S. Thermodynamic analysis of using compressor in absorption heat transformers with ammonia-lithium nitrate and ammonia sodium thiocyanate as working fluids [Volume 11, Issue 3, 2021, Pages 221-234]
Mohammadi Noori, M. Introducing a novel corrugated profile generated from tangential circular curves to increase energy absorption [Volume 11, Issue 3, 2021, Pages 135-149]
Mohammadipour, O. R. Optimal design of a three-outlet channel with specified outlet flow rates using the topology optimization method [Volume 11, Issue 1, 2021, Pages 153-168]
Mohammadpour, Moein Enhancing the performance of Bi-stable Energy Harvester using Chaos control [Volume 11, Issue 2, 2021, Pages 1-14]
Mohammadzadeh, A.R. Free nonlinear vibration analyzing of annular sector plate in contact with fluid [Volume 11, Issue 2, 2021, Pages 73-86]
Mokhtari, M.A. Analysis of axial symmetric circular cylindrical shell vibrations using high-order theory to approximate transverse displacement by finite element [Volume 11, Issue 2, 2021, Pages 87-97]
Mollaei Dariani, B. Assessment of Galling Wear in Automobile Deep Drawing Dies Using Slider-on-Flat-Surface Wear Test [Volume 11, Issue 3, 2021, Pages 151-164]
Molla-Mohammad Zamani, A.R. Experimental and numerical analysis of effective geometrical parameters for energy absorbing of the structures with negative Poisson's ratio made from aluminium alloy 1100 [Volume 11, Issue 1, 2021, Pages 311-324]
Montazeri, M.J. Exergy Analysis and Numerical Investigation of the Effects of Nozzle Profile on the Partially-Admitted Supersonic Turbine's Performance [Volume 11, Issue 1, 2021, Pages 169-184]
Moravej Barzani, S. H. Limit cycle oscillations in swept wings based on fully intrinsic equations and considering the static stall effects [Volume 11, Issue 6, 2022, Pages 207-217]
Mortazavi, Seyed M. Investigation effect of wetted surface of cylindrical shell on vibrational frequency in different immersion depth numerically and experimentally [Volume 11, Issue 6, 2022, Pages 97-109]
Mosaffa, A.R. Thermodynamic analysis of using compressor in absorption heat transformers with ammonia-lithium nitrate and ammonia sodium thiocyanate as working fluids [Volume 11, Issue 3, 2021, Pages 221-234]
Moslemi Naeini, H. Numerical and experimental investigation of deformation length in flexible roll forming process [Volume 11, Issue 6, 2022, Pages 1-14]
Mostafavi, V. Active Vibration control and reduction of shear force of 5MW wind turbine with the help of gyroscope actuator [Volume 11, Issue 2, 2021, Pages 99-118]
Mozafareiyan, Seyed Saeed Investigation of nonlinear aero-elastic of isotropic cracked plate in supersonic flow [Volume 11, Issue 1, 2021, Pages 1-12]
Mozaffari, M. H. Effect of Shell Surface Texture Depth on the Steady State Performance of Noncircular Two Lobe Gas Journal Bearings [Volume 11, Issue 6, 2022, Pages 273-286]

N

Nabati, A. Development of an applied relationship for pressure drop estimation in tri-cone drill bit using Bingham rheological model [Volume 11, Issue 6, 2022, Pages 45-57]
Naderi, A.A. Size-dependent vibration of rotating rayleigh microbeams with variable cross-section in complex environments [Volume 11, Issue 6, 2022, Pages 159-171]
Naghian, M. Using Collocation Discrete Least Squares Meshless method in solving governing equations for non-Newtonian fluids by Herschel- Bulkley model [Volume 11, Issue 2, 2021, Pages 247-259]
Najafi, M. R. Investigation effect of wetted surface of cylindrical shell on vibrational frequency in different immersion depth numerically and experimentally [Volume 11, Issue 6, 2022, Pages 97-109]
Najafizadeh, Mohammadmahdi Solution of the Characteristic Frequency Equations of Levy-type Sandwich Panels with Auxetic Honeycomb Core based on the Improved Reddy’s Third-order Theory [Volume 11, Issue 1, 2021, Pages 291-310]
Najibfar, A. Thermodynamic analysis of using compressor in absorption heat transformers with ammonia-lithium nitrate and ammonia sodium thiocyanate as working fluids [Volume 11, Issue 3, 2021, Pages 221-234]
Nasiri, M. Effect of state feedback controller on dynamic behavior of a rotor supported by active magnetic bearings [Volume 11, Issue 6, 2022, Pages 15-26]
Nasiri, S. A review on the underwater explosive forming [Volume 11, Issue 6, 2022, Pages 59-83]
Nasrollahi, A. Reliability-Based Design Optimization of Columns under Buckling Load [Volume 11, Issue 5, 2021, Pages 49-62]
Nazari, M. B. Crack analysis in diffusion-generalized thermoelasticity problems using the extended finite element method [Volume 11, Issue 5, 2021, Pages 63-82]
Nazari, M.R. Experimental study of the effect of position and intensity of a constant magnetic field on the forced convection heat transfer of Fe2O3 / water nanofluid in the developing thermal region [Volume 11, Issue 1, 2021, Pages 43-58]
Nazarian Shahrbabaki, A. Numerical Study of Dielectric Barrier Discharge (DBD) Plasma Actuators on Separation Control of Supersonic Flow [Volume 11, Issue 4, 2021, Pages 133-148]
Nezamabadi, Alireza Solution of the Characteristic Frequency Equations of Levy-type Sandwich Panels with Auxetic Honeycomb Core based on the Improved Reddy’s Third-order Theory [Volume 11, Issue 1, 2021, Pages 291-310]
Nezamabadi, A.R. Experimental Analysis on the Geometric Parameters of the Composite Metal Matrix Patch to Repair Cracked Aluminum Part [Volume 11, Issue 3, 2021, Pages 85-96]
Niazmand, H. Optimal design of a three-outlet channel with specified outlet flow rates using the topology optimization method [Volume 11, Issue 1, 2021, Pages 153-168]
Nikian, M. Modeling and analysis of total site cogeneration of heat and power from an exergoeconomic approach in a 100MW case study [Volume 11, Issue 5, 2021, Pages 247-258]
Nikkhah-Bahrami, M. Dynamic Behavior of Articulated Pipes Conveying Fluid With Harmonic Velocity Using the Method of Multiple time scales [Volume 11, Issue 3, 2021, Pages 53-70]
Nikkhoo, A. Identification of crack in beams under moving forces using Hilbert-Huang transform [Volume 11, Issue 6, 2022, Pages 173-185]
Nikpey, P. Dynamic Modeling and Controller Design for a Space Vehicle with Fuel Sloshing [Volume 11, Issue 2, 2021, Pages 25-40]
Nili-Ahmadabadi, M. Numerical Simulation and Visualization of Gas-Metal Powder Flow in Laser Cladding Process [Volume 11, Issue 5, 2021, Pages 183-197]
Nourbakhsh, A. Investigation of natural convection heat transfer of viscoplastic nanofluids-Casson model in a square enclosure [Volume 11, Issue 4, 2021, Pages 165-178]

O

Ommi, F. Identification of the Droplet Group Combustion Formation Region by the Flame Index Parameter in the Laminar Counterflow Spray [Volume 11, Issue 1, 2021, Pages 212-199]
Ommi, F. Experimental study of the effects of adding methylated homopolymer to gasoline on the engine performance and pollutant emissions [Volume 11, Issue 5, 2021, Pages 199-210]

P

Pakrooyan, Alireza Solution of the Characteristic Frequency Equations of Levy-type Sandwich Panels with Auxetic Honeycomb Core based on the Improved Reddy’s Third-order Theory [Volume 11, Issue 1, 2021, Pages 291-310]
Panahizadeh, V. Numerical and Experimental Analysis of Spring-back Defect in Flexible Roll Forming Process using Anisotropic Yield Criteria [Volume 11, Issue 4, 2021, Pages 93-105]
Parhizkar, H. Modeling and numerical analysis of a turbine stator vane performance from the second law of thermodynamics view point [Volume 11, Issue 1, 2021, Pages 185-198]
Parsa, Sina Investigating the Effect of Opening Aspect Ratio and Combustion Source Conditions on Behavior of Backdraft Phenomenon by Large Eddy Simulation [Volume 11, Issue 3, 2021, Pages 165-179]
Pirkandi, J. Modeling and numerical analysis of a turbine stator vane performance from the second law of thermodynamics view point [Volume 11, Issue 1, 2021, Pages 185-198]
Pourmoayed, A.R. Free vibration analysis of functionally graded beam with transverse crack using Timoshenko and higher order shear deformation theory [Volume 11, Issue 1, 2021, Pages 275-289]

Q

Qasemi, M. Experimental analysis, mathematical modeling and Sobol sensitivity analysis of surface roughness in orthopedic milling process (polymethylmethacrylate) [Volume 11, Issue 1, 2021, Pages 139-152]

R

Rafee, R. Experimental Study on the Pressure Drop and Efficiency of an Aero-Cyclone with Guide Vanes on the Vortex Finder [Volume 11, Issue 3, 2021, Pages 181-193]
Raghebi, M. Experimental measurement of fracture energy of API X65 steel using drop weight tear test equipped with accelerometer [Volume 11, Issue 1, 2021, Pages 89-96]
Rahimi, A.R. Free vibration analysis of functionally graded beam with transverse crack using Timoshenko and higher order shear deformation theory [Volume 11, Issue 1, 2021, Pages 275-289]
Rahmati, A.R. Application of Finite-Difference Based Lattice Boltzmann Method for Numerical Simulation of Nanofluid Turbulent Convection in channel [Volume 11, Issue 1, 2021, Pages 325-350]
Rakhshkhorshid, M. Determination of Johnson-Cook damage model constants for commercial pure copper sheet by tensile testing on notched specimens [Volume 11, Issue 1, 2021, Pages 97-110]
Ramezani, O. Effect of Plate Numbers on Optimal Condition of Gasket Heat Exchanger with Graphene-Carbon Nanotube Hybrid [Volume 11, Issue 5, 2021, Pages 149-163]
Ranjkesh Adarmanabadi, S. Investigation of dry sliding behavior of metal on nanocomposites reinforced with carbon nanotubes and nanoclay [Volume 11, Issue 6, 2022, Pages 85-95]
Rashidi Meybodi, R. Effect of Shell Surface Texture Depth on the Steady State Performance of Noncircular Two Lobe Gas Journal Bearings [Volume 11, Issue 6, 2022, Pages 273-286]
Rezaeepazhand, J. Investigation of nonlinear aero-elastic of isotropic cracked plate in supersonic flow [Volume 11, Issue 1, 2021, Pages 1-12]
Roohi, E. Numerical Study of the Effect of Passive Counter Rotating Vanes Vortex Generator on NACA 2412 Airfoil [Volume 11, Issue 6, 2022, Pages 235-252]
Rostami, M. Analysis of axial symmetric circular cylindrical shell vibrations using high-order theory to approximate transverse displacement by finite element [Volume 11, Issue 2, 2021, Pages 87-97]
Rostami, M. Size-dependent vibration of rotating rayleigh microbeams with variable cross-section in complex environments [Volume 11, Issue 6, 2022, Pages 159-171]
Rostamiyan, Y. Experimental Investigation of High-velocity Impact Effects on Composite Sandwich Panel with M-Type Lattice Core Made of Carbon Fiber Reinforced by Nano-SiO2 [Volume 11, Issue 6, 2022, Pages 127-142]

S

Saberi, A. Dynamic Analysis and Control of Two Phase Flow Instability in Boilnig Channel [Volume 11, Issue 5, 2021, Pages 165-181]
Saboohi, Z. Identification of the Droplet Group Combustion Formation Region by the Flame Index Parameter in the Laminar Counterflow Spray [Volume 11, Issue 1, 2021, Pages 212-199]
Saboohi, Z. Experimental study of the effects of adding methylated homopolymer to gasoline on the engine performance and pollutant emissions [Volume 11, Issue 5, 2021, Pages 199-210]
Sabri Laghaie, K. Flutter analysis of the panel treated with integrated and segmented constrained layer damping [Volume 11, Issue 3, 2021, Pages 245-261]
Sadati, Seyyed H. Design of hybrid control system for path tracking of a quadrotor subject to uncertain disturbances [Volume 11, Issue 5, 2021, Pages 17-32]
Sadegh Yazdi, M. A review on the underwater explosive forming [Volume 11, Issue 6, 2022, Pages 59-83]
Sadeghzadeh, A. Output Feedback smooth switching control design for switched uncertain linear parameter-varying systems [Volume 11, Issue 6, 2022, Pages 27-44]
Sadidi, M. Experimental and fractography investigation of notch depth effect by instrumented instrumented impact pendulum in 7075 Aluminum alloy [Volume 11, Issue 3, 2021, Pages 15-36]
Saeidi, F. Numerical and Experimental Analysis of Spring-back Defect in Flexible Roll Forming Process using Anisotropic Yield Criteria [Volume 11, Issue 4, 2021, Pages 93-105]
Safarpour, P. Enhancing the performance of Bi-stable Energy Harvester using Chaos control [Volume 11, Issue 2, 2021, Pages 1-14]
Safikhani, H. Optimization of ultrasonic transducer horn geometry with vibrational-thermal performance improvement approach [Volume 11, Issue 1, 2021, Pages 31-42]
Safikhani-Nasim, M. Experimental and numerical analysis of effective geometrical parameters for energy absorbing of the structures with negative Poisson's ratio made from aluminium alloy 1100 [Volume 11, Issue 1, 2021, Pages 311-324]
Salari, M. Investigation effect of wetted surface of cylindrical shell on vibrational frequency in different immersion depth numerically and experimentally [Volume 11, Issue 6, 2022, Pages 97-109]
Salarikheybar, A. Investigation of natural convection heat transfer of viscoplastic nanofluids-Casson model in a square enclosure [Volume 11, Issue 4, 2021, Pages 165-178]
Saleh, A. Thermoeconomic evaluation of drinking water production by using different prime mover on combined production of cooling, heating, power, and freshwater [Volume 11, Issue 1, 2021, Pages 365-379]
Salehi, Gh. R. Computational Fluid Dynamics Simulation of Ljungstrom Rotary Preheater in Steam Power Plant for Leakage Assessment Using Porous Media Approach [Volume 11, Issue 4, 2021, Pages 179-190]
Salehi, M. Health Condition Monitoring of railway wheels through vibration analysis using the moving RMS [Volume 11, Issue 4, 2021, Pages 85-92]
Salehi Pour, H. Free vibration of micro/nano homogeneous beams coated by functionally graded porous layer using analytical and numerical methods [Volume 11, Issue 4, 2021, Pages 33-52]
Salehizadeh, A. M. Numerical analysis of mixed electroosmotic/pressure driven flow using an improved weakly compressible Smoothed Particle Hydrodynamics method [Volume 11, Issue 4, 2021, Pages 121-131]
Sayah Badkhor, M. Investigation of the influence of standoff distance of explosive charge on the response of circular metallic plates [Volume 11, Issue 2, 2021, Pages 175-191]
Sayah Badkhor, M. Experimental Investigation into the Behaviour of FMLs Containing Nanoparticles under Repeated Low-velocity Impact [Volume 11, Issue 6, 2022, Pages 187-206]
Sefid, M. Numerical analysis of mixed electroosmotic/pressure driven flow using an improved weakly compressible Smoothed Particle Hydrodynamics method [Volume 11, Issue 4, 2021, Pages 121-131]
Shahbazian, H.R. Thermo-Fluid Investigation on the Effect of Rotation on Film Cooling Performace at Pressure & Suction Side of the Leading-Edge of a Gas Turbine Blade [Volume 11, Issue 5, 2021, Pages 133-148]
Shahnazari, M. R. Optimization of Heating Element Profile of Ljungstrom Using Discrete Orthogonal Functions and Adjoint Method [Volume 11, Issue 4, 2021, Pages 149-163]
Shahnazari, M. R. Dynamic Analysis and Control of Two Phase Flow Instability in Boilnig Channel [Volume 11, Issue 5, 2021, Pages 165-181]
Shahrjerdi, A. Investigating the ratcheting and shakedown behavior of a carbon steel sheet under cyclic thermal loading and axial loading using Bree diagram [Volume 11, Issue 6, 2022, Pages 143-157]
Shahsavand, M.S. Experimental and Numerical Investigation of Water Impact on Hull of Seaplane UAV [Volume 11, Issue 1, 2021, Pages 227-238]
Shahveh, R. Free nonlinear vibration analyzing of annular sector plate in contact with fluid [Volume 11, Issue 2, 2021, Pages 73-86]
Shahverdi, H. Limit cycle oscillations in swept wings based on fully intrinsic equations and considering the static stall effects [Volume 11, Issue 6, 2022, Pages 207-217]
Shamaghdari, S. Output Feedback smooth switching control design for switched uncertain linear parameter-varying systems [Volume 11, Issue 6, 2022, Pages 27-44]
Shamsoddini, R. Numerical analysis of mixed electroosmotic/pressure driven flow using an improved weakly compressible Smoothed Particle Hydrodynamics method [Volume 11, Issue 4, 2021, Pages 121-131]
Sharifi, V. Experimental Investigation into the Behaviour of FMLs Containing Nanoparticles under Repeated Low-velocity Impact [Volume 11, Issue 6, 2022, Pages 187-206]
Sharifnia, M. Fractional-order super-twisting nonsingular terminal sliding mode control of 2-DOF robotics manipulators [Volume 11, Issue 2, 2021, Pages 41-56]
Sheikhi, M.M. Experimental analysis, mathematical modeling and Sobol sensitivity analysis of surface roughness in orthopedic milling process (polymethylmethacrylate) [Volume 11, Issue 1, 2021, Pages 139-152]
Sheykholeslami, M. R. Investigation of operational parameters on the motional behavior and maximum particle levitated density in ultrasonic levitation [Volume 11, Issue 3, 2021, Pages 71-84]
Sheykholeslami, M.R. Optimization of ultrasonic transducer horn geometry with vibrational-thermal performance improvement approach [Volume 11, Issue 1, 2021, Pages 31-42]
Shokri, Y. Modeling and analysis of total site cogeneration of heat and power from an exergoeconomic approach in a 100MW case study [Volume 11, Issue 5, 2021, Pages 247-258]
Smith, C.R. Comparison the Performance of Rajagopal Musculoskeletal Model and its Updated Versions in Prediction of the Knee Joint Contact Forces During Walking and Squatting [Volume 11, Issue 5, 2021, Pages 83-94]
Soleymani, M. Active Vibration control and reduction of shear force of 5MW wind turbine with the help of gyroscope actuator [Volume 11, Issue 2, 2021, Pages 99-118]
Soorgi, M. Experimental investigation of effect of inlet direction and height on flow pattern and thermal comfort conditions under personalized confluent jets ventilation system [Volume 11, Issue 3, 2021, Pages 195-205]
Soroushan, M. Modeling and numerical analysis of a turbine stator vane performance from the second law of thermodynamics view point [Volume 11, Issue 1, 2021, Pages 185-198]

T

Tabibi, E. Numerical Investigation and Enhancement of Flushing Performance in the Micro-Electro Discharge Machining by Considering the Hole Depth and Dielectric Fluid [Volume 11, Issue 1, 2021, Pages 111-122]
Tahmasbi, V. Experimental analysis, mathematical modeling and Sobol sensitivity analysis of surface roughness in orthopedic milling process (polymethylmethacrylate) [Volume 11, Issue 1, 2021, Pages 139-152]
Talebi, M.H. Experimental study of the effect of position and intensity of a constant magnetic field on the forced convection heat transfer of Fe2O3 / water nanofluid in the developing thermal region [Volume 11, Issue 1, 2021, Pages 43-58]
Talebitooti, M. Introducing a novel corrugated profile generated from tangential circular curves to increase energy absorption [Volume 11, Issue 3, 2021, Pages 135-149]
Talebpour, Z. Optimal design of a three-outlet channel with specified outlet flow rates using the topology optimization method [Volume 11, Issue 1, 2021, Pages 153-168]
Tavakkoli, F. Coupling of Dafalias-Popov’s Two-Surface Plasticity with Notch Stress-Strain Estimation Methods in Plane Stress Problems under Monotonic Uniaxial Loading [Volume 11, Issue 2, 2021, Pages 15-24]
Taylor, W.R. Comparison the Performance of Rajagopal Musculoskeletal Model and its Updated Versions in Prediction of the Knee Joint Contact Forces During Walking and Squatting [Volume 11, Issue 5, 2021, Pages 83-94]
Teymourtash, A.R. Effect of Plate Numbers on Optimal Condition of Gasket Heat Exchanger with Graphene-Carbon Nanotube Hybrid [Volume 11, Issue 5, 2021, Pages 149-163]

Y

Yavari, R. Output Feedback smooth switching control design for switched uncertain linear parameter-varying systems [Volume 11, Issue 6, 2022, Pages 27-44]
Yoosefi, S. Experimental investigation of effect of inlet direction and height on flow pattern and thermal comfort conditions under personalized confluent jets ventilation system [Volume 11, Issue 3, 2021, Pages 195-205]
Yousefi, Ali Numerical simulation and optimization of truck’s cabin strength [Volume 11, Issue 4, 2021, Pages 15-31]
Yousefi, P. Solution of the Characteristic Frequency Equations of Levy-type Sandwich Panels with Auxetic Honeycomb Core based on the Improved Reddy’s Third-order Theory [Volume 11, Issue 1, 2021, Pages 291-310]

Z

Zahedinejhad, P. Frequency Analysis of Bi-directional Porous Functionally Graded Beams with Variable cross section on Elastic Foundation using Reddy Third Order Shear Deformation Theory [Volume 11, Issue 3, 2021, Pages 97-118]
Zalaghi, S. Identification of crack in beams under moving forces using Hilbert-Huang transform [Volume 11, Issue 6, 2022, Pages 173-185]
Zamani, H. Experimental Investigation of Indoor Cooking Using an Indirect Solar Cooker Integrated with Heat Storage Materials [Volume 11, Issue 3, 2021, Pages 207-219]
Zamani, H. Thermodynamic Analysis of an Evacuated Tube Solar Cooker under Different Operating Conditions [Volume 11, Issue 5, 2021, Pages 259-268]
Zameni Mofakham, R. Experimental Analysis on the Geometric Parameters of the Composite Metal Matrix Patch to Repair Cracked Aluminum Part [Volume 11, Issue 3, 2021, Pages 85-96]
Zandi, M. Enhancing the performance of Bi-stable Energy Harvester using Chaos control [Volume 11, Issue 2, 2021, Pages 1-14]
Zandi Baghche Maryam, A. Analysis of FGM Rotating Disk Based on Non-Fourier Heat Conduction Model under Electromagnetic Field [Volume 11, Issue 4, 2021, Pages 53-70]
Zandrad Mojarad, M. The Calculation of Trimaran Vessel Resistance and Uncertainty estimation in Calm water condition by Experimental and Numerical methods [Volume 11, Issue 6, 2022, Pages 253-271]
Zarei, H. R. The effect of aluminide coating on the creep life of Rene 80 nickel base superalloy [Volume 11, Issue 2, 2021, Pages 145-156]
Zare Mehrjardi, M. Effect of Shell Surface Texture Depth on the Steady State Performance of Noncircular Two Lobe Gas Journal Bearings [Volume 11, Issue 6, 2022, Pages 273-286]
Zia Shamami, M. A review on the underwater explosive forming [Volume 11, Issue 6, 2022, Pages 59-83]
Ziya-Shamami, M. Experimental investigation of large plastic deformation of single- and multi-layered circular aluminum plates under repeated uniform impulsive loading [Volume 11, Issue 1, 2021, Pages 123-137]
Zohourmesgar, M. Optimization of ultrasonic transducer horn geometry with vibrational-thermal performance improvement approach [Volume 11, Issue 1, 2021, Pages 31-42]
Zolfaghari, Alirezaَََ Experimental investigation of effect of inlet direction and height on flow pattern and thermal comfort conditions under personalized confluent jets ventilation system [Volume 11, Issue 3, 2021, Pages 195-205]
Zolfaghari, M. Experimental analysis, mathematical modeling and Sobol sensitivity analysis of surface roughness in orthopedic milling process (polymethylmethacrylate) [Volume 11, Issue 1, 2021, Pages 139-152]