Determination of Johnson-Cook damage model constants for commercial pure copper sheet by tensile testing on notched specimens

Authors

1 Department of Mechanical Engineering, Faculty of Mechanical and Materials Engineering, Birjand University of Technology, Birjand, Iran

2 Mechanicaldepartment

Abstract

Nowadays, damage models are used to simulate and predict the failure occurrence regions in manufacturing processes. One of the most famous models that is widely used in finite element commercial codes is Johnson-Cook damage model. The aim of the present research is to determine the constants of Johnson-Cook damage model for pure commercial copper sheet. For this, three different tensile testing specimens (a smooth (standard) specimen and two notched specimen with different notch radii of 10 and 2 mm) were separated along with the rolling direction and tensile tests were conducted on them. The stress triaxiality was determined for each of the specimens, by using the Bridgeman equation. Next, regards to the dependency of the fracture strain to the stress triaxiality, the constants of Johnson-Cook damage model was determined. Numerical simulation was used to evaluate the satisfaction of the method used to determine the constants of Johnson-cook damage model. For this, the error in fracture strain was used as the criterion and the value of it was calculated for each of the tensile testing specimens. The average value of error in fracture strain for three tested specimens was obtained as of 9.68 percent that showed the satisfaction of the method used in this research to determine the constants of Johnson-Cook damage model. The results of this study can be used to simulate the manufacturing processes of the studied copper sheet.

Keywords

References

[1] Verlinden B, Driver J, Samajdar I, Doherty RD, (2007) Thermo-mechanical processing of metallic materials. Elsevier.
[2] William S (1993) Structure Properties and Applications of Engineering Alloys. (Translated by  Ekrami AA and SeyedReihani SM). Sharif University of Technology Scientific Publishing Institute. (In Persian)
[3] Chen G, Ren C, Lu L, Ke Z, Qin X, Ge X (2018) Determination of ductile damage behaviors of high strain rate compression deformation for Ti-6Al-4V alloy using experimental-numerical combined approach. Eng Fract Mech 200: 499-520.
[4] Sajjadi SA (2015) Mechanical behavior of materials. 2nd edn. Ferdowsi University of Mashhad Publications. (In Persian)
[5] Hooputra H, Gese H, Dell H, Werner H (2004) A comprehensive failure model for crashworthiness simulation of aluminium extrusions. Int J Crashworthiness 9(5): 449-464.
[6] Cockcroft MG, Latham DJ (1968) Ductility and    the workability of metals. J Inst Metals 96(1): 33-39.
[7] Gurson AL (1977) Continuum theory of ductile rupture by void nucleation and growth: Part I-Yield criteria and flow rules for porous ductile media. J Eng Mater Technol 99(1): 2-15.
[8] Chu CC, Needleman A (1980) Void nucleation effects in biaxially stretched sheets.
[9] Tvergaard V, Needleman A (1984) Analysis of the cup-cone fracture in a round tensile bar. Acta Metall Mater 32(1):157-169.
[10] Johnson GR, Cook WH (1985) Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. Eng Fract Mech 21(1): 31-48.
[11] Helwany S (2007) Applied soil mechanics with ABAQUS applications. John Wiley & Sons.
[12] Wang K (2016) Calibration of the Johnson-Cook failure parameters as the chip separation criterion in the modelling of the orthogonal metal cutting process. (Doctoral dissertation)
[13] Banerjee A, Dhar S, Acharyya S, Datta D, Nayak N (2015) Determination of Johnson cook material and failure model constants and numerical modelling of Charpy impact test of armour steel. Mater Sci Eng A 640: 200-209.
[14] Salimpour E, Mirzaei M. (2018) Experimental determination and numerical implementation of ductile damage parameters of Al 2024-O.    Modares Mechanical Engineering 18(2): 45-52. (In Persian)
[15] Talebi-Ghadikolaee H, Moslemi Naeini H, Mirnia MJ, Mirzai MA, Gorji H, Alexandro S (2020) Study of the effect of calibration procedure on the accuracy of the phenomenological ductile fracture criteria in sheet metal forming. Journal of Solid and Fluid Mechanics 10(1): 1-16. (In Persian)
[16] Vahdati M, Rasooli MA, Gerdooei M (2020) Theoretical and numerical analysis of hot deep drawing of hemispherical thick head. Journal of Solid and Fluid Mechanics 10(2): 59-78. (In Persian)
[17] ASTM E8 (2003) Test methods for tension testing of metallic materials. Annual Book of ASTM Standards.
[18] Bridgman PW (2013) Studies in large plastic flow and fracture. Harvard University Press.
[19] Iqbal MA, Senthil K, Sharma P, Gupta NK    (2016) An investigation of the constitutive   behavior of Armox 500T steel and armor piercing incendiary projectile material. Int J Impact Eng 96:146-164.
Journal of Solid and Fluid Mechanics
Volume 11, Issue 1
March and April 2021
Pages 97-110

Files

Share

How to cite

Statistics