Dynamic Analysis and Control of Two Phase Flow Instability in Boilnig Channel

Authors

1 Mechanical faculty/K.N.Toosi University of Technology

2 Mechanical Faculty/ K.N.Toosi university of Technology

3 mechanical dept/ K.N.Toosi unversity of tech.

4 MECHANIC FACULTY/KN.TOOSI UNIVERSITY OF TECHNOLOGY/TEHRAN/IRAN

Abstract

The aim of this paper is to dynamically analyze the instability of two phase flow in a heated channel, in order to avoid its occurrence. Impact of the pump Is modeled by considering a pressure drop function in terms of mass velocity. The conditions of internal resistance characteristic and how it interacts with the pump characteristic curve, which will cause leadding instability; Has been Investigated. In presence of oscillation, the amplitude of oscillation in this phenomenon is limited. Also, It has been shown that the presence of a surge tank can cause instability of the pressure drop in the system. with considering condition that instability occurs if the slope of the external characteristic curve is smaller than the slope of the internal characteristic curve in the negative slope region of the internal resistance characteristic; Instability control methods have been investigated and analyzed by adding input resistance or by control the supply pressure. Lyapunov method is used in order to linear instability analysis and flow phase portrait is presented in singular points. Also, the solution show that the amplitude and frequency of oscillation depend on the oscillation damping coefficient and with decreasing it the frequency of the oscillation increases.

Keywords


[1]  Lee J, Mudawar I (2005) Two-phase flow in high-heat-flux micro-channel heat sink for refrigeration cooling applications: Part II—heat transfer characteristics. Int J Heat Mass Tran 48(5): 941-955.
[2]  Kim SM, Mudawar I (2017) Thermal design and operational limits of two-phase micro-channel heat sinks. Int J Heat Mass Tran 106: 861-876.
[3]  Kuo CJ, Peles Y (2009) Pressure effects on flow boiling instabilities in parallel microchannels. Int J Heat Mass Tran 52(1-2): 271-280.
[4]  Ghobadi M, Muzychka YS (2015) Heat transfer and pressure drop in mini channel heat sinks. Heat Tran Eng 36(10): 902-911.
[5]  Stenning A (1964), Instabilities in the flow of a boiling liquid. J Basic Eng Trans ASME 86.
[6]  Zhang T, Tong T, Chang JY, Peles Y, Prasher R (2009) Ledinegg instability in microchannels. Int J Heat Mass Tran 52(25-26): 5661-5674.
[7]  Bergles AE, Lienhard VJH, Kendall GE, Griffith P (2003) Boiling and evaporation in small diameter channels. Heat Tran Eng 24(1): 18-40.
[8]  Koşar A, Kuo CJ, Peles Y (2006) Suppression of boiling flow oscillations in parallel microchannels by inlet restrictors. J Heat Tran. 128(3): 251-260.
[9]  Balasubramanian P, Kandlikar SG (2005) Experimental study of flow patterns, pressure drop, and flow instabilities in parallel rectangular minichannels. J Heat Tran Eng 26(3): 20-27.
[10] Kakac S, Bon B (2008) A review of two-phase flow dynamic instabilities in tube boiling systems. Int J Heat Mass Tran 51(3-4): 399-433.
[11] Ruspini LC, Marcel CP, Clausse A (2014) Two-phase flow instabilities: A review. Int J Heat Mass Trans 71: 521-548.
[12] Van Oevelen T, Weibel JA, Garimella SV (2017) Predicting two-phase flow distribution and stability in systems with many parallel heated channels. Int J Heat Mass Trans 107: 557-571.
[13] Padki MM, Palmer K, Kakac S, Veziroǧlu TN (1992) Bifurcation analysis of pressure-drop oscillations and the Ledinegg instability. Int J Heat Mass Tran 35(2): 525-532.
[14] Yang K, Zhang A, Wang J (2018) On the Ledinegg instability in parallel channels: A new and exact criterion. Int J Therm Sci 129: 193-200.
[15] Shin CW, No HC (2017) Experimental study for pressure drop and flow instability of two-phase flow in the PCHE-type steam generator for SMRs. Nucl Eng Desig 318:109-118.
[16] Qi S, Zhou T, Li B, Shahzad MA, Zou Y, Huang YP (2017) Experimental study on Ledinegg flow instability of two-phase natural circulation in narrow rectangular channels at low pressure. Prog Nucl Enrgy 98: 321-328.
[17] Lee J, Chae H, Chang SH (2013) Flow instability during subcooled boiling for a downward flow at low pressure in a vertical narrow rectangular channel. Int J Heat Mass Tran 67: 1170-1180.
[18] Yu Z, Yuan H, Chen C, Yang Z,  Tan S (2016) Two-phase flow instabilities of forced circulation at low pressure in a rectangular mini-channel. Int J Heat Mass Tran 98: 438-447.
[19] Zhang T, Peles Y, Wen JT, Tong T, Chang JY, Prasher R, Jensen MK (2010) Analysis and active control of pressure-drop flow instabilities in boiling microchannel systems. Int J Heat Mass Tran 53(11-12): 2347-2360.
[20] Chiapero EM, Fernandino M, Dorao C (2012) Review on pressure drop oscillations in boiling systems. Nucl Eng Desig 250: 436-447.
[21] Ozawa M, Nakanishi S, Ishigai S, Mizuta Y, Tarui H (1979) Flow instabilities in boiling channels: part 1 pressure drop oscillation. Bull JSME 22(170): 1113-1118.
[22] Park IW., Fernandino M, Dorao CA (2018) Experimental study on the characteristics of pressure drop oscillations and their interaction with short-period oscillation in a horizontal tube. Int J Refrig 91: 246-253.
[23] Gürgenci H, Veziroglu T, Kakac S (1983) Simplified nonlinear descriptions of two-phase flow instabilities in vertical boiling channel. Int J Heat Mass Tran 26(5): 671-679.
[24] Padki M, Liu H, Kakac S (1991) Two-phase flow pressure-drop type and thermal oscillations. Int J Heat Fluid Fl 12(3): 240-248.
[25] Mawasha P, Gross R (2001) Periodic oscillations in a horizontal single boiling channel with thermal wall capacity. Int J Heat Fluid Fl 22(6): 643-649.
[26] Liu H, Kocak H, Kakac S (1995) Dynamical analysis of pressure-drop type oscillations with a planar model. Int J Multiphas Fl 21(5): 851-859.
[27] Kakaç S, Venkataraman MR, Pramuanjaroenkij A, Kotcioglu I (2009) Modeling of two-phase flow instabilities in convective in-tube boiling horizontal systems. J Therm Sci Tech 29(1): 107-116.
[28] Ruspini LC (2013) Experimental and numerical investigation on two-phase flow instabilities. NTNU Uni.
[29]  Shahnazari MR, Amjadigolpayegani A, Soltani M (2021) Bifurcation analysis on interaction between ledinegg instability and pressure drop oscillations in a horizontal boiling channel. Int J Heat Mass Tran 166: 120760.
[30] Rahman ME, Singh S (2018) Non-linear stability analysis of pressure drop oscillations in a heated channel. Ch Eng Sci 192: 176-186.
[31] Nam NN, Lee SD, You SS, Phuc BDH (2019) Dynamical Analysis and Active Control for Flow Instabilities in Boiling Microchannel. Int J Heat Mass Tran 37(1): 203-211.
[32] Doyle J (1982) Analysis of feedback systems with structured uncertainties. IEE P-Contr Theor Ap.
[33] Zhang T, Wen JT, Julius A, Bai H, Peles Y, Jensen MK (2010) Parallel-channel flow instabilities and active control schemes in two-phase microchannel heat exchanger systems. IEEE Contr P.
[34] Shahnazari M, Amjadi Golpayegani A, Saberi A  (2020) Modeling and parametric analysis of two-phase fluid stability in boiling process in a thermal channel. Amirkabir J Mech Eng.
[35] Jin Q, Wen JT, Narayanan S (2019) Characteristics of pressure drop oscillation in a microchannel cooling system. App Therm Eng 160: 113849.
[36] Muñoz-Cobo JL, Verdú G (1991) Aplication of Hopf bifurcation theory and variational methods to the study of limit cycles in boiling water reactors. Ann Nucl Energy 18(5): 269-302.
[37] Padki MM, Palmer K, Kakac S, Veziroǧlu TN (1992) Bifurcation analysis of pressure-drop oscillations and the Ledinegg instability. Int J Heat Mass Tran 35(2): 525-532.
[38] Ledinegg M (1938) Instability flow during natural forced circulation. Warme 61: 891-898.
[39] Muir P (1999) Optimal discrete and continuous mono‐implicit Runge–Kutta schemes for BVODEs. Adv Comp Math 10(2): 135-167.
[40] Muir P, Adams M  (2000) Mono-implicit Runge–Kutta–Nyström methods for boundary value ordinary differential equations. Tech Rpt Saint Mary’s University.