Author Index

A

  • Abbasian, Mohammad Hossein Investigating the influence of bearings elastic properties on nonlinear dynamics of unbalanced induction motors shaft in presence of asymmetric magnetic pull [Volume 13, Issue 5, 2023, Pages 137-153]
  • Abdi Elmi, E. Numerical study of the effect of phase change materials containing multi-walled carbon nanotubes on improving the heat sink performance of electrical equipment [Volume 13, Issue 1, 2023, Pages 25-41]
  • Abshahi pour, Ali Numerical analysis of fluid flow and combined natural and force convection heat transfer for nanofluid in concentric /eccentric rotating cylinders [Volume 13, Issue 5, 2023, Pages 77-89]
  • Afrasiab, Hamed Failure prediction in defective pipelines using finite element simulation of fluid-structure interaction and neural network method [Volume 13, Issue 5, 2023, Pages 105-120]
  • Agakhani Mahyari, Farhad An investigation into the effect of surface preparation method and heat Treatment on mechanical properties of multilayer Al / Al / Steel sheet produced by cold roll bonding [Volume 13, Issue 2, 2023, Pages 55-67]
  • Aghabalaeivahid, Ali Characterization of Flow and Hardening Parameters of 1100 Aluminium Alloy by Combining Nanoindentation Test and Crystal Plasticity Finite Element Simulation [Volume 13, Issue 3, 2023, Pages 97-113]
  • Ahmadi, Bahman Developing a Multi-Objective Game Theoretic Design of Path-Generating Planar Mechanism [Volume 13, Issue 6, 2024, Pages 17-29]
  • Ahmadi, H. Investigating on the energy absorption of PA/GF6 thermoplastic composite produced by hot pressing method under low-velocity impact test [Volume 13, Issue 1, 2023, Pages 1-13]
  • Ahmadi Brooghani, Seyed Y. Investigation of stress distribution in healthy and arthritic knee joints after registering 3D files on the radiographic images [Volume 13, Issue 1, 2023, Pages 147-156]
  • Ahmadi Sheikhsarmast, Nima Investigating the effect of the geometry of gas injection channels on the performance and dynamic behavior of the polymer electrolyte membrane fuel cell [Volume 13, Issue 2, 2023, Pages 121-128]
  • AhmadKkhatir, Farzad Experimental investigation of the formability of heat treated AA6063 tubes using hydraulic rotary draw bending process [Volume 13, Issue 4, 2023, Pages 95-106]
  • Ahsani Tehrani, Hojjat Tissue Temperature Control in a Bio-Heat Transfer Equation with the Conjugate Gradient Method [Volume 13, Issue 3, 2023, Pages 159-170]
  • Alimirzaloo, Vali Characterization of Flow and Hardening Parameters of 1100 Aluminium Alloy by Combining Nanoindentation Test and Crystal Plasticity Finite Element Simulation [Volume 13, Issue 3, 2023, Pages 97-113]
  • Allaee, Mohammad Hossein Numerical and Experimental Analysis of the Effect of Material, Diameter and Number of wires as the Reinforcements of the Foam Core in the Bending Strength of Sandwich Panels [Volume 13, Issue 4, 2023, Pages 67-81]
  • Amiri, Farzad Numerical and Experimental Analysis of the Effect of Material, Diameter and Number of wires as the Reinforcements of the Foam Core in the Bending Strength of Sandwich Panels [Volume 13, Issue 4, 2023, Pages 67-81]
  • Anjomrouz, Amin A review on the structures and characteristics of micro-turbojet engines [Volume 13, Issue 5, 2023, Pages 59-76]
  • Arbabi, V. Investigation of stress distribution in healthy and arthritic knee joints after registering 3D files on the radiographic images [Volume 13, Issue 1, 2023, Pages 147-156]
  • Ashory, Mohammad Reza Investigating the effects of cross section asymmetry on the vibration behavior of the nonlinear nanoresonator under internal resonance conditions [Volume 13, Issue 4, 2023, Pages 53-66]
  • Ashrafi, Hojjat Investigating the effect of the geometry of gas injection channels on the performance and dynamic behavior of the polymer electrolyte membrane fuel cell [Volume 13, Issue 2, 2023, Pages 121-128]
  • Askari, Amir Reza Investigating the influence of bearings elastic properties on nonlinear dynamics of unbalanced induction motors shaft in presence of asymmetric magnetic pull [Volume 13, Issue 5, 2023, Pages 137-153]
  • Askari, Rasoul Investigating, Simulating and Applying Geometric Scaling Effects in the Prediction and Calculation of Aerodynamic Coefficients from Wind Tunnel to Real Scale [Volume 13, Issue 5, 2023, Pages 1-17]
  • Azimi, Milad Iterative Learning Observer-based Sliding Mode Fault Tolerant Control of a Rigid-Flexible System with External Disturbances [Volume 13, Issue 4, 2023, Pages 39-51]

B

  • Baesmat, S. Numerical investigating of using the air duct and body side curvature effects on the Tara aerodynamic performance [Volume 13, Issue 1, 2023, Pages 71-86]
  • Bagheri, Amir Numerical Simulation of Magneto-Hydrodynamics Effect on Supersonic Flow of A Projectile [Volume 13, Issue 5, 2023, Pages 43-57]
  • Baghestani, Alimohammad Failure prediction in defective pipelines using finite element simulation of fluid-structure interaction and neural network method [Volume 13, Issue 5, 2023, Pages 105-120]
  • Balakheli, Mohammad Mahdi Thermodynamic and economic analyses of combined generation system based on hybrid prime mover of internal and external combustion engines with natural gas and biomass power sources [Volume 13, Issue 6, 2024, Pages 103-119]
  • Barati, Farzan An experimental investigation on the influence of geometrical configuration of copper patches on mechanical strength of cracked titanium components using diffusion method [Volume 13, Issue 3, 2023, Pages 85-96]
  • Bazazzadeh, M. Investigating the effect of induced centrifugal force resulting from duct geometry on the propagation speed of premixed flame using OpenFOAM software [Volume 13, Issue 1, 2023, Pages 111-124]
  • Borhani, Mohammad Amin Comparative investigation of nanofluid heat transfer in vertical annular channel with cosine heat flux by experimental and numerical methods [Volume 13, Issue 4, 2023, Pages 147-158]

D

  • Dadgar Asl, Yaghoob Numerical and Experimental Analysis of Bowing Defect in the Flexible Roll Forming Process of Copper-Aluminum Double Layer Sheets [Volume 13, Issue 6, 2024, Pages 75-87]
  • Damya, Amin Investigating the effect of the geometry of gas injection channels on the performance and dynamic behavior of the polymer electrolyte membrane fuel cell [Volume 13, Issue 2, 2023, Pages 121-128]
  • Dardel, Morteza Identification of a Generalized Prandtl-Ishlinskii Model for a Micro Positioning System Actuated by Shape Memory Alloys Actuator [Volume 13, Issue 2, 2023, Pages 15-25]
  • Davari, Hossein Numerical investigation of the effects of Helmholtz resonator and primary flow oscillations on subsonic ejector performance [Volume 13, Issue 5, 2023, Pages 19-42]
  • Davoodi, Fahimeh Tissue Temperature Control in a Bio-Heat Transfer Equation with the Conjugate Gradient Method [Volume 13, Issue 3, 2023, Pages 159-170]
  • Dehghan, Mehdi Nonlinear Thermo-Elastic Analysis of FG Cylinder with Temperature-Dependent Properties with Perturbation and Differential Quadrature Methods [Volume 13, Issue 4, 2023, Pages 1-14]
  • Dezfouli, Mohsen Two-dimensional simulation of laminar flow around four two-degree-of-freedom cylindrical cylinders in a rectangular arrangement using random vortex-boundary element method [Volume 13, Issue 6, 2024, Pages 169-184]
  • Dinarvand, S. Numerical study of the effect of phase change materials containing multi-walled carbon nanotubes on improving the heat sink performance of electrical equipment [Volume 13, Issue 1, 2023, Pages 25-41]
  • Divsalar, Ali Failure prediction in defective pipelines using finite element simulation of fluid-structure interaction and neural network method [Volume 13, Issue 5, 2023, Pages 105-120]

E

  • Ebrahimi, Reza Unbalance response of a spinning pipe conveying fluid in vertical configuration equipped with piezoelectric patches [Volume 13, Issue 3, 2023, Pages 55-66]
  • Ebrahimi Mamaghani, Ali Stability and dynamic analysis of Rayleigh functionally graded porous beams with longitudinal motion in hygro-thermo-magnetic environments [Volume 13, Issue 2, 2023, Pages 1-13]
  • Eghdami, Zahra Experimental and theoretical investigation of Young's modulus of liver cancer tissue using rectangular, V-shaped and dagger cantilevers of an atomic force microscope [Volume 13, Issue 5, 2023, Pages 121-135]
  • Eghlimidezh, Marzieh Iterative Learning Observer-based Sliding Mode Fault Tolerant Control of a Rigid-Flexible System with External Disturbances [Volume 13, Issue 4, 2023, Pages 39-51]
  • Ehsaniseresht, Abbas Investigating the influence of bearings elastic properties on nonlinear dynamics of unbalanced induction motors shaft in presence of asymmetric magnetic pull [Volume 13, Issue 5, 2023, Pages 137-153]
  • Elyasi, Majid Experimental investigation of the formability of heat treated AA6063 tubes using hydraulic rotary draw bending process [Volume 13, Issue 4, 2023, Pages 95-106]
  • Eskandari jam, Jafar Numerical and Experimental Analysis of the Effect of Material, Diameter and Number of wires as the Reinforcements of the Foam Core in the Bending Strength of Sandwich Panels [Volume 13, Issue 4, 2023, Pages 67-81]
  • Esmaeilian, M. Thickness optimization of the airplane wing box components by the design of experiments method [Volume 13, Issue 1, 2023, Pages 43-56]
  • Esmaeli, Ali Numerical Simulation of Magneto-Hydrodynamics Effect on Supersonic Flow of A Projectile [Volume 13, Issue 5, 2023, Pages 43-57]

F

  • Faraji, Hamed Experimental and theoretical investigation of Young's modulus of liver cancer tissue using rectangular, V-shaped and dagger cantilevers of an atomic force microscope [Volume 13, Issue 5, 2023, Pages 121-135]
  • Fathi, Alireza Identification of a Generalized Prandtl-Ishlinskii Model for a Micro Positioning System Actuated by Shape Memory Alloys Actuator [Volume 13, Issue 2, 2023, Pages 15-25]

G

  • Ganjali, Ahmad Error estimation based on stress recovery by adaptivity in nonlinear problems of elasto-plasticity behavior by isogeometric method [Volume 13, Issue 3, 2023, Pages 67-84]
  • Ghadiri, Sajjad A review on the structures and characteristics of micro-turbojet engines [Volume 13, Issue 5, 2023, Pages 59-76]
  • Ghaemi, Narjes Investigating the effects of cross section asymmetry on the vibration behavior of the nonlinear nanoresonator under internal resonance conditions [Volume 13, Issue 4, 2023, Pages 53-66]
  • Ghafurian, M. M. Reduce the hot-spot temperature of an oil transformer using a heat pipe [Volume 13, Issue 1, 2023, Pages 87-97]
  • Golmakani, Hadi Numerical and Experimental Analysis of Bowing Defect in the Flexible Roll Forming Process of Copper-Aluminum Double Layer Sheets [Volume 13, Issue 6, 2024, Pages 75-87]

H

  • Haghighat Namini, Vahab Development of the Conceptual Design Algorithm for Tactical Aerostat [Volume 13, Issue 2, 2023, Pages 103-120]
  • Haghighi, Behrad Numerical analysis of fluid flow and combined natural and force convection heat transfer for nanofluid in concentric /eccentric rotating cylinders [Volume 13, Issue 5, 2023, Pages 77-89]
  • Haghighi Poshtiri, Amin Two-dimensional simulation of laminar flow around four two-degree-of-freedom cylindrical cylinders in a rectangular arrangement using random vortex-boundary element method [Volume 13, Issue 6, 2024, Pages 169-184]
  • Hasani, Amir Experimental extraction of modulus of elasticity of gastric cancer tissue using cylindrical developed contact mechanics models [Volume 13, Issue 4, 2023, Pages 83-94]
  • Hashemian, Seyed Majid Thermodynamic and economic analyses of combined generation system based on hybrid prime mover of internal and external combustion engines with natural gas and biomass power sources [Volume 13, Issue 6, 2024, Pages 103-119]
  • Hassanzadeh, Mahdi Optimum Shape Design of Axisymmetric Extrusion Die by using Hybrid Meta-Heuristic Optimization (ICACO) [Volume 13, Issue 4, 2023, Pages 107-117]
  • Heidarpour, B. Analytical investigation of the leg geometric characteristics effect of the electronic board on the shock transmission caused by satellite separation [Volume 13, Issue 1, 2023, Pages 15-23]
  • Hematiyan, M.R. Identification of the Failure Load of a Hyperelastic Body Considering the Location of the Failure [Volume 13, Issue 5, 2023, Pages 167-186]
  • Hosseini, Seiyed Mohammad Javad Performance improvement in refrigeration systems using fin-reinforced phase change material [Volume 13, Issue 4, 2023, Pages 159-170]

I

  • Imani, Amin A review on the structures and characteristics of micro-turbojet engines [Volume 13, Issue 5, 2023, Pages 59-76]
  • Isvandzibaei, Mohammad Reza Optimization of Shear Strength of 420 Stainless Steel Brazing Joints Using BNi-2 by Response Surface Methodology [Volume 13, Issue 6, 2024, Pages 47-58]
  • Izadi, M. Numerical Study of Slot Lip Effects on Aerodynamics Performance of a Two-Element Airfoil with the Approach of Decreasing the Landing Distance [Volume 13, Issue 1, 2023, Pages 99-109]

J

  • Jabbari, Ali Experimental and theoretical investigation of Young's modulus of liver cancer tissue using rectangular, V-shaped and dagger cantilevers of an atomic force microscope [Volume 13, Issue 5, 2023, Pages 121-135]
  • Jafarian, Ali Development of the Conceptual Design Algorithm for Tactical Aerostat [Volume 13, Issue 2, 2023, Pages 103-120]
  • Jafarkazemi, Farzad Experimental and numerical study of V-Cone flowmeter with continuous nose in single phase liquid flow [Volume 13, Issue 6, 2024, Pages 152-139]
  • Jalali Aghchai, Abdolhossein An investigation into the effect of surface preparation method and heat Treatment on mechanical properties of multilayer Al / Al / Steel sheet produced by cold roll bonding [Volume 13, Issue 2, 2023, Pages 55-67]
  • Jamali, Ali Developing a Multi-Objective Game Theoretic Design of Path-Generating Planar Mechanism [Volume 13, Issue 6, 2024, Pages 17-29]
  • Javadi, Seyed Moein Numerical study of the use of focused ultrasound waves by the phased array method in the inspection of polyethylene pipe joints. [Volume 13, Issue 5, 2023, Pages 155-165]
  • Jazirian, Hesam Experimental and numerical study of V-Cone flowmeter with continuous nose in single phase liquid flow [Volume 13, Issue 6, 2024, Pages 152-139]
  • Joulaei, Amir Numerical investigation of the effects of Helmholtz resonator and primary flow oscillations on subsonic ejector performance [Volume 13, Issue 5, 2023, Pages 19-42]

K

  • Kahani, Mostafa Evaluation of multi-effect distillation unit (MED) for desalination of Iranshahr steam power plant effluents using heat losses of boiler blowdown [Volume 13, Issue 6, 2024, Pages 89-102]
  • Kalantar, Vali Experimental analysis of the performance of a bidirectional single-unit air compressor with a semi-gear and rack mechanism in power transmission [Volume 13, Issue 2, 2023, Pages 129-142]
  • Karami Monfared, Leila Investigation of aspect ratio effect on focusing of Nano-bio particle in viscoelastic fluid [Volume 13, Issue 5, 2023, Pages 187-201]
  • Karimi, Mehdi Workspace of 3-RRR parallel robot using the combination of interval analysis and refinement methods by considering the limitation of active joints movement [Volume 13, Issue 3, 2023, Pages 29-43]
  • Karimi, Peyman Experimental extraction of modulus of elasticity of gastric cancer tissue using cylindrical developed contact mechanics models [Volume 13, Issue 4, 2023, Pages 83-94]
  • Kazemi, Sayyed Roohollah Investigation of sound transmission in composite rectangular panels under the incidence wave with two various angles [Volume 13, Issue 2, 2023, Pages 41-54]
  • Kazemnadi, Saeid Numerical Analysis of Hot Deep Drawing Process of Thick Steel Sheet without Using Blank Holder with Tractrix and Pseudo Tractrix Dies [Volume 13, Issue 2, 2023, Pages 69-87]
  • Khadem, Javad Experimental analysis of the performance of a bidirectional single-unit air compressor with a semi-gear and rack mechanism in power transmission [Volume 13, Issue 2, 2023, Pages 129-142]
  • Khaki, R. Numerical Study of Slot Lip Effects on Aerodynamics Performance of a Two-Element Airfoil with the Approach of Decreasing the Landing Distance [Volume 13, Issue 1, 2023, Pages 99-109]
  • Khosravi, Saman Numerical simulation of heat transfer in a parabolic solar coleector absorber tube using two-phase method [Volume 13, Issue 3, 2023, Pages 115-127]

L

  • Liaghat, Gh.H. Investigating on the energy absorption of PA/GF6 thermoplastic composite produced by hot pressing method under low-velocity impact test [Volume 13, Issue 1, 2023, Pages 1-13]

M

  • Mahdavi, Arash Investigating the performance of a solar still coupled with a semitransparent photovoltaic module under various wind speed conditions [Volume 13, Issue 4, 2023, Pages 135-146]
  • Mahdavi Keshavar, Omid Investigating, Simulating and Applying Geometric Scaling Effects in the Prediction and Calculation of Aerodynamic Coefficients from Wind Tunnel to Real Scale [Volume 13, Issue 5, 2023, Pages 1-17]
  • Mahdian, A. Thickness optimization of the airplane wing box components by the design of experiments method [Volume 13, Issue 1, 2023, Pages 43-56]
  • Mahmoodi, Mohammad Javad Multi-scale Electrochemical-mechanical Modeling of Fast Response of Ionic Polymer-Metal Composite Actuator [Volume 13, Issue 6, 2024, Pages 31-46]
  • Mahmoodi, Mostafa Investigation of the Effect of Noise Parameters of Jet Using Acoustic Load Calculation Algorithm on the Launch Vehicle During Lift-Off [Volume 13, Issue 3, 2023, Pages 17-27]
  • Mahmoudi Nasab, Ardeshir An experimental investigation on the influence of geometrical configuration of copper patches on mechanical strength of cracked titanium components using diffusion method [Volume 13, Issue 3, 2023, Pages 85-96]
  • Mahmoudkhani, Saeed Effects of the rigid disk attached to the edges of the cylindrical shells on the natural frequencies of different modes [Volume 13, Issue 4, 2023, Pages 15-37]
  • Manouchehri, A.M. Investigating on the energy absorption of PA/GF6 thermoplastic composite produced by hot pressing method under low-velocity impact test [Volume 13, Issue 1, 2023, Pages 1-13]
  • Mehregan, Mahmood Thermodynamic and economic analyses of combined generation system based on hybrid prime mover of internal and external combustion engines with natural gas and biomass power sources [Volume 13, Issue 6, 2024, Pages 103-119]
  • Mirabdolah Lavasani, A. Numerical study of the effect of phase change materials containing multi-walled carbon nanotubes on improving the heat sink performance of electrical equipment [Volume 13, Issue 1, 2023, Pages 25-41]
  • Mirhosseini, Mojtaba Study on performance of floating solar still using pumice stone as photothermal material [Volume 13, Issue 3, 2023, Pages 129-142]
  • Mirzaee, Iraj Investigating the effect of the geometry of gas injection channels on the performance and dynamic behavior of the polymer electrolyte membrane fuel cell [Volume 13, Issue 2, 2023, Pages 121-128]
  • Mirzaee Kakhki, Elyas Guided wave modeling using p version of semi analytical finite element method [Volume 13, Issue 3, 2023, Pages 1-16]
  • Mirzaei, Jaber Optimization of Shear Strength of 420 Stainless Steel Brazing Joints Using BNi-2 by Response Surface Methodology [Volume 13, Issue 6, 2024, Pages 47-58]
  • Mirzaei, Majid Modeling of Crashworthiness in Energy Absorbent Shells with Discontinuities [Volume 13, Issue 6, 2024, Pages 1-15]
  • Mirzakhani, Aboozar Error estimation based on stress recovery by adaptivity in nonlinear problems of elasto-plasticity behavior by isogeometric method [Volume 13, Issue 3, 2023, Pages 67-84]
  • Modabberifar, Mehdi Experimental extraction of modulus of elasticity of gastric cancer tissue using cylindrical developed contact mechanics models [Volume 13, Issue 4, 2023, Pages 83-94]
  • Modanloo, Vahid Application of multi-criteria decision making method for selection of lightweight material in manufacturing of railway vehicles [Volume 13, Issue 3, 2023, Pages 45-53]
  • Modanloo, Vahid Experimental investigation of the formability of heat treated AA6063 tubes using hydraulic rotary draw bending process [Volume 13, Issue 4, 2023, Pages 95-106]
  • Mohammadi, Mehdi Investigation of aspect ratio effect on focusing of Nano-bio particle in viscoelastic fluid [Volume 13, Issue 5, 2023, Pages 187-201]
  • Mohammad Rezaei, Hamidreza Numerical study of the use of focused ultrasound waves by the phased array method in the inspection of polyethylene pipe joints. [Volume 13, Issue 5, 2023, Pages 155-165]
  • Mokhtari, Javad Comparative investigation of nanofluid heat transfer in vertical annular channel with cosine heat flux by experimental and numerical methods [Volume 13, Issue 4, 2023, Pages 147-158]
  • Molaei, Abbas Numerical simulation of forced heat transfer of liquid metals in a microchannel heat sink under a magnetic field [Volume 13, Issue 6, 2024, Pages 121-137]
  • Mollaei, Tahereh Experimental and theoretical investigation of Young's modulus of liver cancer tissue using rectangular, V-shaped and dagger cantilevers of an atomic force microscope [Volume 13, Issue 5, 2023, Pages 121-135]
  • Moodi, Hossein Analysis of fire development in a passenger car considering various insulation [Volume 13, Issue 5, 2023, Pages 91-104]
  • Moosaie, Amin Nonlinear Thermo-Elastic Analysis of FG Cylinder with Temperature-Dependent Properties with Perturbation and Differential Quadrature Methods [Volume 13, Issue 4, 2023, Pages 1-14]
  • Moshir Estekhareh, Seyyed Gh. Investigating the effect of induced centrifugal force resulting from duct geometry on the propagation speed of premixed flame using OpenFOAM software [Volume 13, Issue 1, 2023, Pages 111-124]
  • Mostaghelchi, Mehdi Experimental analysis of the performance of a bidirectional single-unit air compressor with a semi-gear and rack mechanism in power transmission [Volume 13, Issue 2, 2023, Pages 129-142]
  • Mostofizadeh, A.R. Investigating the effect of induced centrifugal force resulting from duct geometry on the propagation speed of premixed flame using OpenFOAM software [Volume 13, Issue 1, 2023, Pages 111-124]
  • Mozafar, Fatemeh Identification of the Failure Load of a Hyperelastic Body Considering the Location of the Failure [Volume 13, Issue 5, 2023, Pages 167-186]
  • Mozaffari, Mohammad Hossein Solving the inverse problem of identifying internal boundaries and estimating the mechanical properties of materials using optimization methods in materials with variable modulus of elasticity [Volume 13, Issue 2, 2023, Pages 27-39]

N

  • Najafi, Moslem Effects of the rigid disk attached to the edges of the cylindrical shells on the natural frequencies of different modes [Volume 13, Issue 4, 2023, Pages 15-37]
  • Nariman-zadeh, Nader Developing a Multi-Objective Game Theoretic Design of Path-Generating Planar Mechanism [Volume 13, Issue 6, 2024, Pages 17-29]
  • Naseri, Reza Solving the inverse problem of identifying internal boundaries and estimating the mechanical properties of materials using optimization methods in materials with variable modulus of elasticity [Volume 13, Issue 2, 2023, Pages 27-39]
  • Nateghi, Mohammad Reza Numerical investigation of the blades number effect on the bipolar noise radiation level caused by the high skew propeller [Volume 13, Issue 3, 2023, Pages 143-158]
  • Nazari, Mohsen Tissue Temperature Control in a Bio-Heat Transfer Equation with the Conjugate Gradient Method [Volume 13, Issue 3, 2023, Pages 159-170]
  • Nejati, V. Numerical investigation of two-phase nanofluid flow in square cavity with inclined wall under different magnetic field [Volume 13, Issue 1, 2023, Pages 125-136]
  • Nezamabadi, Alireza An experimental investigation on the influence of geometrical configuration of copper patches on mechanical strength of cracked titanium components using diffusion method [Volume 13, Issue 3, 2023, Pages 85-96]
  • Niazmand, H. Reduce the hot-spot temperature of an oil transformer using a heat pipe [Volume 13, Issue 1, 2023, Pages 87-97]
  • Nikandish, P. Evaluation of the Effective Variables on the Performance of the Hydraulic Pilot Valve Including the Orifice with the Fixed and Moving Parallel Surfaces [Volume 13, Issue 1, 2023, Pages 57-69]
  • Nikoobin, Amin Investigating the effects of cross section asymmetry on the vibration behavior of the nonlinear nanoresonator under internal resonance conditions [Volume 13, Issue 4, 2023, Pages 53-66]
  • Nili-Ahmadabadi, Mahdi Numerical investigation of the effects of Helmholtz resonator and primary flow oscillations on subsonic ejector performance [Volume 13, Issue 5, 2023, Pages 19-42]
  • Nimafar, M. Numerical study of the effect of phase change materials containing multi-walled carbon nanotubes on improving the heat sink performance of electrical equipment [Volume 13, Issue 1, 2023, Pages 25-41]
  • Nouri Niyaraki, Meysam Optimization of Shear Strength of 420 Stainless Steel Brazing Joints Using BNi-2 by Response Surface Methodology [Volume 13, Issue 6, 2024, Pages 47-58]
  • Nouroozi, Mahdi A Three-Dimensional Potential-Based analysis for Partial cavitating Flow around Projectiles with Various Head Using BEM [Volume 13, Issue 6, 2024, Pages 153-167]

O

  • Omidi kashani, Behzad Experimental analysis of the performance of a bidirectional single-unit air compressor with a semi-gear and rack mechanism in power transmission [Volume 13, Issue 2, 2023, Pages 129-142]

P

  • Pasandideh-fard, Mahmoud A Three-Dimensional Potential-Based analysis for Partial cavitating Flow around Projectiles with Various Head Using BEM [Volume 13, Issue 6, 2024, Pages 153-167]
  • Pasandidehfard, M. Numerical investigating of using the air duct and body side curvature effects on the Tara aerodynamic performance [Volume 13, Issue 1, 2023, Pages 71-86]
  • Pasandideh Fard, Mahmoud Numerical Simulation of Magneto-Hydrodynamics Effect on Supersonic Flow of A Projectile [Volume 13, Issue 5, 2023, Pages 43-57]
  • Pirkandi, Jamasb Investigation of the Effect of Noise Parameters of Jet Using Acoustic Load Calculation Algorithm on the Launch Vehicle During Lift-Off [Volume 13, Issue 3, 2023, Pages 17-27]
  • Pormahmod, Nader Investigating the effect of the geometry of gas injection channels on the performance and dynamic behavior of the polymer electrolyte membrane fuel cell [Volume 13, Issue 2, 2023, Pages 121-128]
  • Pourabdollah, Davoud Investigation of the Effect of Noise Parameters of Jet Using Acoustic Load Calculation Algorithm on the Launch Vehicle During Lift-Off [Volume 13, Issue 3, 2023, Pages 17-27]
  • Pourhassan, Ehsan Evaluation of multi-effect distillation unit (MED) for desalination of Iranshahr steam power plant effluents using heat losses of boiler blowdown [Volume 13, Issue 6, 2024, Pages 89-102]
  • Pourkariman, Fatemeh Workspace of 3-RRR parallel robot using the combination of interval analysis and refinement methods by considering the limitation of active joints movement [Volume 13, Issue 3, 2023, Pages 29-43]

R

  • Rabieefar, Hamidreza Experimental and numerical study of V-Cone flowmeter with continuous nose in single phase liquid flow [Volume 13, Issue 6, 2024, Pages 152-139]
  • Rahbari, Hossein Identification of a Generalized Prandtl-Ishlinskii Model for a Micro Positioning System Actuated by Shape Memory Alloys Actuator [Volume 13, Issue 2, 2023, Pages 15-25]
  • Rahi, A. Analytical investigation of the leg geometric characteristics effect of the electronic board on the shock transmission caused by satellite separation [Volume 13, Issue 1, 2023, Pages 15-23]
  • Rahimi, Meghdad Performance improvement in refrigeration systems using fin-reinforced phase change material [Volume 13, Issue 4, 2023, Pages 159-170]
  • Rahmani, Nima Experimental extraction of modulus of elasticity of gastric cancer tissue using cylindrical developed contact mechanics models [Volume 13, Issue 4, 2023, Pages 83-94]
  • Rahmati, Ahmad Reza Numerical simulation of forced heat transfer of liquid metals in a microchannel heat sink under a magnetic field [Volume 13, Issue 6, 2024, Pages 121-137]
  • Rahmati, Moein Failure prediction in defective pipelines using finite element simulation of fluid-structure interaction and neural network method [Volume 13, Issue 5, 2023, Pages 105-120]
  • Ranjbar, Aliakbar Performance improvement in refrigeration systems using fin-reinforced phase change material [Volume 13, Issue 4, 2023, Pages 159-170]
  • Rashidi, Saman Study on performance of floating solar still using pumice stone as photothermal material [Volume 13, Issue 3, 2023, Pages 129-142]
  • Rashidi Alavijeh, Samaneh Numerical Analysis of Hot Deep Drawing Process of Thick Steel Sheet without Using Blank Holder with Tractrix and Pseudo Tractrix Dies [Volume 13, Issue 2, 2023, Pages 69-87]
  • Rasoli, Mohammadali Numerical Analysis of Hot Deep Drawing Process of Thick Steel Sheet without Using Blank Holder with Tractrix and Pseudo Tractrix Dies [Volume 13, Issue 2, 2023, Pages 69-87]
  • Rayegan, H. Investigation of stress distribution in healthy and arthritic knee joints after registering 3D files on the radiographic images [Volume 13, Issue 1, 2023, Pages 147-156]
  • Rezaeepajhand, Jalil Guided wave modeling using p version of semi analytical finite element method [Volume 13, Issue 3, 2023, Pages 1-16]
  • Rezazadeh, Marzieh Numerical simulation of heat transfer in a parabolic solar coleector absorber tube using two-phase method [Volume 13, Issue 3, 2023, Pages 115-127]
  • Rostami, Hoda Modeling of Crashworthiness in Energy Absorbent Shells with Discontinuities [Volume 13, Issue 6, 2024, Pages 1-15]

S

  • Sabahi, Mohammad Ali Nonlinear vibrations of functionally graded porous micropipes conveying fluid flow [Volume 13, Issue 2, 2023, Pages 89-101]
  • Saeedi, Mohammad S. Developing a Multi-Objective Game Theoretic Design of Path-Generating Planar Mechanism [Volume 13, Issue 6, 2024, Pages 17-29]
  • Safarabady, Amin Investigating factors affecting electrode wear rate in electrical discharge machining of AZ91 magnesium alloy metal matrix composite reinforced with silicon carbide microparticles [Volume 13, Issue 4, 2023, Pages 119-134]
  • Safavi, Hamid Reza An investigation into the effect of surface preparation method and heat Treatment on mechanical properties of multilayer Al / Al / Steel sheet produced by cold roll bonding [Volume 13, Issue 2, 2023, Pages 55-67]
  • Sahraei, M. Thickness optimization of the airplane wing box components by the design of experiments method [Volume 13, Issue 1, 2023, Pages 43-56]
  • Saidi, Ali Reza Nonlinear vibrations of functionally graded porous micropipes conveying fluid flow [Volume 13, Issue 2, 2023, Pages 89-101]
  • Salahi, N. Reduce the hot-spot temperature of an oil transformer using a heat pipe [Volume 13, Issue 1, 2023, Pages 87-97]
  • Saleh, Seied R. Numerical investigation of two-phase nanofluid flow in square cavity with inclined wall under different magnetic field [Volume 13, Issue 1, 2023, Pages 125-136]
  • Samadani, Farzan Investigation of sound transmission in composite rectangular panels under the incidence wave with two various angles [Volume 13, Issue 2, 2023, Pages 41-54]
  • Sarkheil, Saeed Development of the Conceptual Design Algorithm for Tactical Aerostat [Volume 13, Issue 2, 2023, Pages 103-120]
  • Seyedkashi, S.M. Hossein Numerical and Experimental Analysis of Bowing Defect in the Flexible Roll Forming Process of Copper-Aluminum Double Layer Sheets [Volume 13, Issue 6, 2024, Pages 75-87]
  • Shafiey Dehaj, Mohammad Numerical analysis of fluid flow and combined natural and force convection heat transfer for nanofluid in concentric /eccentric rotating cylinders [Volume 13, Issue 5, 2023, Pages 77-89]
  • Shahini, Ali Error estimation based on stress recovery by adaptivity in nonlinear problems of elasto-plasticity behavior by isogeometric method [Volume 13, Issue 3, 2023, Pages 67-84]
  • Shahnazari, Ali Investigating the performance of a solar still coupled with a semitransparent photovoltaic module under various wind speed conditions [Volume 13, Issue 4, 2023, Pages 135-146]
  • Shahnazi, Mohammad Reza Stability and dynamic analysis of Rayleigh functionally graded porous beams with longitudinal motion in hygro-thermo-magnetic environments [Volume 13, Issue 2, 2023, Pages 1-13]
  • Shahravi, M. Analytical investigation of the leg geometric characteristics effect of the electronic board on the shock transmission caused by satellite separation [Volume 13, Issue 1, 2023, Pages 15-23]
  • Shahriari, B. Thickness optimization of the airplane wing box components by the design of experiments method [Volume 13, Issue 1, 2023, Pages 43-56]
  • Shahriari, Behrooz Nonlinear Thermo-Elastic Analysis of FG Cylinder with Temperature-Dependent Properties with Perturbation and Differential Quadrature Methods [Volume 13, Issue 4, 2023, Pages 1-14]
  • Shams Taleghani, A. Numerical Study of Slot Lip Effects on Aerodynamics Performance of a Two-Element Airfoil with the Approach of Decreasing the Landing Distance [Volume 13, Issue 1, 2023, Pages 99-109]
  • Sharbatiyan, Mohammad Hossein Study on performance of floating solar still using pumice stone as photothermal material [Volume 13, Issue 3, 2023, Pages 129-142]
  • Sheikhi Azqandi, Mojtaba Optimum Shape Design of Axisymmetric Extrusion Die by using Hybrid Meta-Heuristic Optimization (ICACO) [Volume 13, Issue 4, 2023, Pages 107-117]
  • Sheikholeslani, Mohammad Reza Numerical study of the use of focused ultrasound waves by the phased array method in the inspection of polyethylene pipe joints. [Volume 13, Issue 5, 2023, Pages 155-165]
  • Shirafkan, Mostafa Failure prediction in defective pipelines using finite element simulation of fluid-structure interaction and neural network method [Volume 13, Issue 5, 2023, Pages 105-120]
  • Shirani, Amir Saeed Comparative investigation of nanofluid heat transfer in vertical annular channel with cosine heat flux by experimental and numerical methods [Volume 13, Issue 4, 2023, Pages 147-158]
  • Shirani, M. Thickness optimization of the airplane wing box components by the design of experiments method [Volume 13, Issue 1, 2023, Pages 43-56]
  • Shoul, Nasrin Numerical analysis of fluid flow and combined natural and force convection heat transfer for nanofluid in concentric /eccentric rotating cylinders [Volume 13, Issue 5, 2023, Pages 77-89]
  • Soori, Mohamad Mahdi Guidance and control of the Pitch channel of an interceptor missile using neural sliding mode control [Volume 13, Issue 6, 2024, Pages 59-73]
  • Soori, Seyed Josein Guidance and control of the Pitch channel of an interceptor missile using neural sliding mode control [Volume 13, Issue 6, 2024, Pages 59-73]
  • Sousanabadi Farahani, Amin Investigating factors affecting electrode wear rate in electrical discharge machining of AZ91 magnesium alloy metal matrix composite reinforced with silicon carbide microparticles [Volume 13, Issue 4, 2023, Pages 119-134]

T

  • Taghavi-Ganji, Amir Hossein Multi-scale Electrochemical-mechanical Modeling of Fast Response of Ionic Polymer-Metal Composite Actuator [Volume 13, Issue 6, 2024, Pages 31-46]
  • Taheri, M. The Second Phase of Gold Nanoparticle Manipulation based on AFM in Different Liquid Environments [Volume 13, Issue 1, 2023, Pages 137-146]
  • Taheri, Moein Experimental and theoretical investigation of Young's modulus of liver cancer tissue using rectangular, V-shaped and dagger cantilevers of an atomic force microscope [Volume 13, Issue 5, 2023, Pages 121-135]
  • Taheri, Moein Experimental extraction of modulus of elasticity of gastric cancer tissue using cylindrical developed contact mechanics models [Volume 13, Issue 4, 2023, Pages 83-94]
  • Tahmasbi, Vahid Investigating factors affecting electrode wear rate in electrical discharge machining of AZ91 magnesium alloy metal matrix composite reinforced with silicon carbide microparticles [Volume 13, Issue 4, 2023, Pages 119-134]
  • Talaee, Mohammad Reza Analysis of fire development in a passenger car considering various insulation [Volume 13, Issue 5, 2023, Pages 91-104]
  • Talebi, Mansour Comparative investigation of nanofluid heat transfer in vertical annular channel with cosine heat flux by experimental and numerical methods [Volume 13, Issue 4, 2023, Pages 147-158]
  • Talebi, Shahram Investigation of aspect ratio effect on focusing of Nano-bio particle in viscoelastic fluid [Volume 13, Issue 5, 2023, Pages 187-201]
  • Talebi-Ghadikolaee, Hossein Experimental investigation of the formability of heat treated AA6063 tubes using hydraulic rotary draw bending process [Volume 13, Issue 4, 2023, Pages 95-106]
  • Tale Masouleh, Mehdi Workspace of 3-RRR parallel robot using the combination of interval analysis and refinement methods by considering the limitation of active joints movement [Volume 13, Issue 3, 2023, Pages 29-43]
  • Tavakoli, Mehdi Numerical investigation of the effects of Helmholtz resonator and primary flow oscillations on subsonic ejector performance [Volume 13, Issue 5, 2023, Pages 19-42]
  • Tavakoli saboor, Seyed Ali Numerical Simulation of Magneto-Hydrodynamics Effect on Supersonic Flow of A Projectile [Volume 13, Issue 5, 2023, Pages 43-57]
  • Teimouri, A. Numerical investigation of two-phase nanofluid flow in square cavity with inclined wall under different magnetic field [Volume 13, Issue 1, 2023, Pages 125-136]
  • Teymourtash, A.R. Numerical investigating of using the air duct and body side curvature effects on the Tara aerodynamic performance [Volume 13, Issue 1, 2023, Pages 71-86]

V

  • Varshovi-Jaghargh, Payam Workspace of 3-RRR parallel robot using the combination of interval analysis and refinement methods by considering the limitation of active joints movement [Volume 13, Issue 3, 2023, Pages 29-43]

Y

  • Yari, Ehsan Numerical investigation of the blades number effect on the bipolar noise radiation level caused by the high skew propeller [Volume 13, Issue 3, 2023, Pages 143-158]

Z

  • Zahmatkesh, I. Numerical investigation of two-phase nanofluid flow in square cavity with inclined wall under different magnetic field [Volume 13, Issue 1, 2023, Pages 125-136]
  • Zamen, Mohammad Evaluation of multi-effect distillation unit (MED) for desalination of Iranshahr steam power plant effluents using heat losses of boiler blowdown [Volume 13, Issue 6, 2024, Pages 89-102]
  • Zare Mehrjardi, Mahdi Solving the inverse problem of identifying internal boundaries and estimating the mechanical properties of materials using optimization methods in materials with variable modulus of elasticity [Volume 13, Issue 2, 2023, Pages 27-39]
  • Zolfaghari, Mojtaba Investigating factors affecting electrode wear rate in electrical discharge machining of AZ91 magnesium alloy metal matrix composite reinforced with silicon carbide microparticles [Volume 13, Issue 4, 2023, Pages 119-134]