The Second Phase of Gold Nanoparticle Manipulation based on AFM in Different Liquid Environments

Author

Associate Professor of Mechanical Engineering, Arak University, Arak, Iran

Abstract

The use of gold metal in astronautics, electronics and medical sciences has led to its consideration. Therefore, structural studies and changes have been made to improve the properties or establish special atomic arrangements in nanoscience for this particular metal. Atomic force microscopy(AFM) is one of the most widely used tools for these purposes. Therefore, in this paper, the displacement of gold nanoparticles during manipulation using the atomic force microscopy, which is one of the objectives of the second phase, in the environmental conditions of water, plasma and methanol, has been investigated. For this purpose, the process is first modeled in two dimensions and the intermolecular forces of van der Waals, the double layer force and the hydration force are considered. Then, the displacement diagrams are drawn considering the forces between the molecule and the studied environments. Finally, according to the simulation results in different environments, the highest displacement of gold nanoparticles in the second phase of manipulation was in water and the lowest in plasma.

Keywords

References

[1] Ando T (2017) High-speed atomic force microscopy and its future prospects. Biophys Rev 10(2): 285–292.
[2] Chen J, Xu K (2020) Applications of atomic force microscopy in materials, semiconductors, polymers, and medicine: A minireview. Instrum Sci Technol 48(6): 667-681.
[3] Dzyaloshinskii IE, Lifshitz EM, Pitaevskii LP (1961) The general theory of van der Waals forces. Adv Phys 10(38): 165-209.
[4] Taheri M, Bathaee SH (2019) Sensitivity analysis of peripheral parameters in three dimentional nano-manipulation by using HK model. J Sol and Flu Mech 9(2): 123-139.‏
[5] Korayem MH, Zakeri M (2008) Sensitivity analysis of nanoparticles pushing critical conditions in 2-D controlled nanomanipulation based on AFM. J Adv Manuf Technol 41(7-8): 714–726.
[6] Curiotto S, Cheynis F, Müller P, Leroy F (2020) 2D Manipulation of Nanoobjects by Perpendicular Electric Fields: Implications for Nanofabrication. ACS Appl Nano Mater 3(2): 1118–1122.
[7] Korayem MH, Jahanshahi M, Khaksar H (2020) Modeling and simulation of the dynamics, contact mechanics and control of the nanomanipulation of elliptical porous alumina nanoparticles based on atomic force microscopy. Eur J Mech A Solids 84: 104060-1-15.
[8] Krieg M, Fläschner G, Alsteens D, Gaub BM, Roos WH, Wuite GJL, Müller DJ (2018) Atomic force microscopy-based mechanobiology. Nat Rev Phys 1(1): 41-57.
[9] Korayem MH, Badkoobehhezaveh H, Taheri M (2017) Experimental Determination of HT29 Cancerous Cell Surface Roughness by Atomic Force Microscopy to be Applied in Nanomanipulation. J Appl Comput Sci Mech 28(1): 111-122.‏
[10] Gross L, Schuler B, Pavliček N, Fatayer S, Majzik Z, Moll N, Meyer G (2018) Atomic Force Microscopy for Molecular Structure Elucidation. Angew Chem Int Edition 57(15): 3888–3908.
[11] Gur Y, Ravina I, Babchin AJ (1978) On the electrical double layer theory. II. The Poisson—Boltzmann equation including hydration forces. J Colloid Interface Sci 64(2): 333-341.
[12] Motaghi A, Korayem MH, Zakeri M (2010) Dynamic modeling of 2D nano-manipulation based on AFM in liquid environment. 2010 17th Iranian Conference of Biomedical Engineering (ICBME): 1-4.
[13] Mohammadi SZ, NejatPishkenari H, Mohammadi Moghaddam M (2021) 3D distributed modeling of trolling-mode AFM during 2D manipulation of a spherical cell. J Nanopart Res 23(4): 1-20.
[14] Morag J, Dishon M, Sivan U (2013) The governing role of surface hydration in ion specific adsorption to silica: An AFM-based account of the Hofmeister universality and its reversal. Langmuir 29(21): 6317-6322.
[15] Taheri M (2022) Investigation of the effect of different friction models on experimental extraction of 3D nanomanipulation force and critical time of colon cancer tissue.‏ Amirkabir J Mech Eng 54(4): 791-804.‏
 
[16] Taheri M (2022) Application of atomic force microscopy in critical force and critical time extraction of 2D manipulation for gastric cancer tissue with different friction models, Nanoscale 9(1): 136-145.
[17] Khalili M, Taheri M, Bathaee SH, Shakeri‏ F (2022) Study of DNA nanoparticle manipulation using atomic force microscopy based on finite element method using theories of contact mechanics‏. Mech Adv Smart Mater 1 (2): 155-174‏.
[18] Korayem MH, Rastegar Z (2021) Development of 3D manipulation of viscoelastic biological cells by AFM based on contact models and oscillatory drag. Mech Adv Mater Struct 28(24): 2572-2584.
[19] Korayem MH, Khaksar H (2022) Optimum path planning of elliptic and cubic nanoparticles using one and dual probe atomic force microscopes. Mech Adv Mater Struct 29(15): 2126-2141.
[20] Taheri M, Mirzalou M (2022) Theoretical and Experimental Simulation of Young Modulus Extraction of Breast MCF-10 Cells Using Atomic Force Microscope. Modares Mech Eng 22(01): 37-45.
[21] Korayem MH, Taheri M, Korayem AH (2014) Manipulation with atomic force microscopy: DNA and yeast micro/nanoparticles in biological environments. Proc Inst Mech Eng Part K: J Multi-body Dyn 228(4): 414-425.‏
Journal of Solid and Fluid Mechanics
Volume 13, Issue 1
March and April 2023
Pages 137-146

Files

Share

How to cite

Statistics