Investigation of sound transmission in composite rectangular panels under the incidence wave with two various angles

Authors

1 Department of Solids, Faculty of Mechanical Engineering, Guilan University

2 Faculty of Mechanical Engineering,, University of Guilan.

Abstract

Nowadays, composite panels are widely used in various industries, and the study of the behavior of these panels under acoustic vibrations is one of the important cases in engineering analysis. Also, the effects of incidence and azimuthal angles and Mach number are investigated and the calculated critical frequency and sound transmission loss are validated with other works. The results show that the critical and coincidence frequencies and sound transmission loss are influenced by factors such as the orthotropic behavior of the panel and its thickness, incidence and azimuthal angles, sound wave Mach number, and transverse shear flexibility. Based on the resulting graphs, increasing the incidence and azimuthal angles causes the enhancement of the critical frequency and sound transmission loss, while the orthotropic parameter has the opposite effect. On the other hand, increasing the Mach number and decreasing the thickness of the panel reduces the sound transmission loss and increases the critical frequency of the panel. Also, with the increase of the transverse shear flexibility of the panel, the critical frequency is increased. The trends of coincidence frequency changes are also similar to the mentioned trends of critical frequency with respect to the effective parameters except for the incidence angle. According to the presented results, the coincidence frequency of the panel, unlike the critical frequency, decreases with the increase of the incidence angle.

Keywords

Main Subjects

References

[1] Reynolds DD (1981) Engineering Principles of Acoustics Noise and Vibration. Boston, MA. Allyn & Bacon.
[2] Cremer L, Heckl M  (2013) Structure-borne sound structural vibrations and sound radiation at audio frequencies. Springer Science & Business Media.
[3] Norton MP, Karczub DG  (2003) Fundamentals of noise and vibration analysis for engineers. Cambridge university press.
[4] Heckl M (1981) The tenth Sir Richard Fairey memorial lecture. Sound transmission in buildings. J. Sound Vib. 77(2): 165-189.
[5] Narayanan S, Shanbhag R (1982) Sound transmission through a damped sandwich panel. J. Sound Vib. 80(3): 315-327.
[6] Eaton D (1987) ESA PSS-03-1201 Issue 1. Structural acoustic design manual.
[7] Beranek L (1971) Noise and vibration control (Papers on noise and vibration control covering acoustics in free space, outdoors, small enclosures and rooms, measurement, analysis and design problems).
[8] Guyader J, Lesueur C (1978) Acoustic transmission through orthotropic multilayered plates, part II: transmission loss. J. Sound Vib.58(1): 69-86.
[9] Renji  K, Nair P, Narayanan S (1997) Critical and coincidence frequencies of flat panels. J. Sound Vib.205(1): 19-32.
[10] Talebi Tooti R, Choudari Khameneh AM (2016) Sound transmission across double-walled orthotropic cylindrical shells under incidence wave with two various angles based on the three-dimensional elasticity theory. Mod. Mech. Eng. 16(9): 1-11.
[11] Jafari AA, Golzari M, and Jafari MS (2017) Sound transmission loss through triple-walled sandwich cylindrical shells in the presence of external flow. Mod. Mech. Eng. 17(10): 439-450.
[12] Amirinezhad H, Tarkashvand A, Talebi Tooti R (2020) Acoustic wave transmission through a polymeric foam plate using the mathematical model of functionally graded viscoelastic (FGV) material. Thin-Walled Struct. 148: 106466.
[13] Frampton KD (2005) The effect of flow-induced coupling on sound radiation from convected fluid loaded plates.  J. Acoust. Soc. Am. 117(3): 1129-1137.
[14] Xin F, Lu T (2010) Analytical modeling of sound transmission across finite aeroelastic panels in convected fluids. J. Acoust. Soc. Am. 128(3): 1097-1107.
[15] Clarkson B, Pope R (1981) Experimental determination of modal densities and loss factors of flat plates and cylinders. J. Sound Vib. 77(4): 535-549.
[16] Renji K, Nair P, Narayanan S (1996) Modal density of spacecraft structural elements. J. Spacecr. Technol. 6(2): 40-48.
[17] Jones RM (1998) Mechanics of composite materials. CRC press.
[18] Renji K, Nair P, Narayanan S  (1996) Modal density of composite honeycomb sandwich panels. J. Sound Vib.195(5): 687-699.
[19] Ghinet S, Atalla N, Osman H (2006) Diffuse field transmission into infinite sandwich composite and laminate composite cylinders. J. Sound Vib. 289(4-5): 745-778.
[20] Liu Y, He C (2015) On sound transmission through double-walled cylindrical shells lined with poroelastic material: comparison with Zhou׳ s results and further effect of external mean flow. J. Sound Vib. 358: 192-198.
[21] Talebitooti R, Zarastvand M, Sharif Rouhani AH (2019), Investigating hyperbolic shear deformation theory on vibroacoustic behavior of the infinite functionally graded thick plate.  Lat. Am. J. Solids Struct. 16.
[22] Ghafouri M, Ghassabi M, Zarastvand M.R, Talebitooti R (2022) Sound propagation of three-dimensional sandwich panels: influence of three-dimensional re-entrant auxetic core. AIAA J. 60(11): 6374-6384.
 
[23] Roussos LA, (1985) Noise transmission loss of a rectangular plate in an infinite baffle, NASA TR 2398, Washington, DC.
Journal of Solid and Fluid Mechanics
Volume 13, Issue 2
May and June 2023
Pages 41-54

Files

Share

How to cite

Statistics