Author Index

A

  • Abolfazli Esfahani, Javad Optimizing the performance of solar water heater energy storage system using phase change materials [Volume 14, Issue 2, 2024, Pages 95-110]
  • Afsari, Ahmad Nonlinear dynamic response of truncated conical shells reinforced with carbon nanotubes with functional graded ceramic-metal matrix under harmonic excitation [Volume 14, Issue 3, 2024, Pages 43-56]
  • Afsari Moghaddam, Ali Reza Investigation of the simultaneous effect of laser shock peening and graphene oxide coating on residual stress and fatigue corrosion properties of IN792 alloy [Volume 14, Issue 5, 2024, Pages 121-136]
  • Aghaei Malekabadi, Masoumeh Experimental Study of Using Dielectric Barrier Discharge(DBD) Plasma Actuator as Virtual Winglet [Volume 14, Issue 1, 2024, Pages 77-92]
  • Aghajani afghan, Amirhossein Thermodynamic analysis of an HDH water desalination system with a solar-driven absorption refrigeration cycle [Volume 14, Issue 3, 2024, Pages 11-25]
  • Ahangarani Farahani, Alireza Designing, Construction and Attitude Identification of a Portable Quadcopter Using Flight Test Data Based on Genetic Algorithm and Artificial Neural Networks [Volume 14, Issue 1, 2024, Pages 93-107]
  • Ahangarani Farahani, Ali Reza Automatic landing drone using the anticipatory controller method [Volume 14, Issue 5, 2024, Pages 137-153]
  • Ahmadi, Habib Investigation of the internal resonances of a beam with a local bistable nonlinear energy sink [Volume 14, Issue 6, 2025, Pages 33-42]
  • Akbarzadeh, Pooria Experimental investigation of ballistic limit and energy absorption in hybrid composites made of Kevlar and Ingra fibers [Volume 14, Issue 6, 2025, Pages 61-74]
  • Akhani Senejani, Hassan Experimental and numerical analysis of the effect of the angle of impact of rigid projectiles on the depth of penetration and the amount of deflection in semi-infinite concrete targets [Volume 14, Issue 6, 2025, Pages 44-59]
  • Alaei, Mohammad Hossein Investigating the effect of carbon fabric grammage on the mechanical and erosion properties of CFRP reinforced with ZrB2/SiC ceramic particles at a temperature of 3000°C [Volume 14, Issue 5, 2024, Pages 87-107]
  • Alamian, Rezvan Performance simulation of a reactivity controlled compression ignition (RCCI) engine fueled with waste cooking oil biodiesel (WCO) with a focus on consumption trends of fuel constituents [Volume 14, Issue 2, 2024, Pages 1-13]
  • Aliakbari, Karim Numerical investigation of combustion and intake valve timing on the performance of TU5 spark ignition engine [Volume 14, Issue 6, 2025, Pages 19-32]
  • Alirezapouri, Mohammad Ali Fuel Cell-Based Hybrid Ship Design [Volume 14, Issue 2, 2024, Pages 15-29]
  • Aliyan, Amir Hossein Numerical study of the performance parameters of the developed centrifugal compressor using a classical machine learning algorithm [Volume 14, Issue 4, 2024, Pages 1-14]
  • Allahverdizadeh, Akbar Electromechanical Modeling of the Heart in Healthy and Pulmonary Arterial Hypertension Cases [Volume 14, Issue 5, 2024, Pages 27-37]
  • Almasi, Davood Experimental determination of the parameters of ductile damage model of aluminum 5083 and numerical application of the calibrated model [Volume 14, Issue 2, 2024, Pages 127-138]
  • Amiri-Jaghargh, Ali Experimental Investigating the effects of delignification of common woods in Iran on the performance of Interfacial solar steam generators [Volume 14, Issue 4, 2024, Pages 73-85]
  • Amraee, Ali Asghar Investigating the direct absorption planar collector with a central absorber tube for simultaneous surface and volume absorption and the effect of carbon nanofluid in improving thermal performance [Volume 14, Issue 2, 2024, Pages 65-76]
  • Andishmand, Emad Automatic landing drone using the anticipatory controller method [Volume 14, Issue 5, 2024, Pages 137-153]
  • Asadi Hamzehkandi, Hanieh Dynamics of Confined Spherical Gas Bubbles in an Elastic Vessel Filled with a Thixotropic Fluid [Volume 14, Issue 3, 2024, Pages 77-93]
  • Askari, Rasoul Numerical Simulation and Aerodynamic Performance Investigation of Insect-inspired Propellers [Volume 14, Issue 1, 2024, Pages 1-16]
  • Attarnejad, Reza Fluid-structure interaction problem in the framework of Arbitrary Lagrangian-Eulerian (ALE) description using a monolithic approach in 2D [Volume 14, Issue 6, 2025, Pages 91-103]
  • Azarkhazin, Javad Numerical investigation of combustion and intake valve timing on the performance of TU5 spark ignition engine [Volume 14, Issue 6, 2025, Pages 19-32]
  • Azizi, Mehranali Optimum design of impingement cooling system using differential evolution algorithm in the 2D-Nozzle linear of a turbofan engine [Volume 14, Issue 2, 2024, Pages 31-43]

B

  • Bagherian Farahabadi, Hossein Fuel Cell-Based Hybrid Ship Design [Volume 14, Issue 2, 2024, Pages 15-29]
  • Bakhtiary Doost, Mohammad Javad Experimental and numerical investigating of distribution of thickness, drawing depth and forming limit diagram of steel sheet using Nakazima test [Volume 14, Issue 2, 2024, Pages 139-153]
  • Baratimajan, Ali Experimental study of the interaction of hydraulic jumps caused by an inclined jet and a vertical jet [Volume 14, Issue 1, 2024, Pages 17-28]
  • Brooghani, Ahmadi Investigation of the simultaneous effect of laser shock peening and graphene oxide coating on residual stress and fatigue corrosion properties of IN792 alloy [Volume 14, Issue 5, 2024, Pages 121-136]

C

  • Chavoshi Komar Olia, Javad Investigating the Influence of Maximum Camber, Amplitude and Frequency of Oscillation on the Hysteresis Characteristics of an Oscillating Airfoil [Volume 14, Issue 4, 2024, Pages 53-71]

D

  • Darabi, Mohammad Performance analysis of a centrifugal compressor in a vapor compression refrigeration cycle with an energy-based approach [Volume 14, Issue 6, 2025, Pages 1-18]
  • Delalat, Meysam Designing, Construction and Attitude Identification of a Portable Quadcopter Using Flight Test Data Based on Genetic Algorithm and Artificial Neural Networks [Volume 14, Issue 1, 2024, Pages 93-107]
  • Delavari, Seyyed Mohammad Mahdi Numerical investigation of combustion and intake valve timing on the performance of TU5 spark ignition engine [Volume 14, Issue 6, 2025, Pages 19-32]

E

  • Ebrahimi, Salman Optimizing the performance of solar water heater energy storage system using phase change materials [Volume 14, Issue 2, 2024, Pages 95-110]
  • Eftekhari Yazdi, Mohammad Investigating the direct absorption planar collector with a central absorber tube for simultaneous surface and volume absorption and the effect of carbon nanofluid in improving thermal performance [Volume 14, Issue 2, 2024, Pages 65-76]
  • Eisapour, Mehdi Simulation and Optimization of a Hybrid Renewable System for Providing Electrical and Thermal Energy at Faculty of Engineering, Golestan University [Volume 14, Issue 3, 2024, Pages 57-76]
  • Elyasi, Majid Selection of the optimal perforated structure in the axial loading of aluminum thin-walled tubes using multi-criteria decision-making: COPRAS method [Volume 14, Issue 1, 2024, Pages 139-145]
  • Eskandari Jaam, Jafar Investigating the effect of carbon fabric grammage on the mechanical and erosion properties of CFRP reinforced with ZrB2/SiC ceramic particles at a temperature of 3000°C [Volume 14, Issue 5, 2024, Pages 87-107]
  • Esmaeilzade Aval, Reza Automatic landing drone using the anticipatory controller method [Volume 14, Issue 5, 2024, Pages 137-153]

F

  • Fadaee, Mohammad Free vibration analysis of a folded auxetic plate using the Levy-differential quadrature method [Volume 14, Issue 5, 2024, Pages 155-165]
  • Farrokhfal, Hamid Optimum design of impingement cooling system using differential evolution algorithm in the 2D-Nozzle linear of a turbofan engine [Volume 14, Issue 2, 2024, Pages 31-43]

G

  • Ganjian, Mohiedin Fuel Cell-Based Hybrid Ship Design [Volume 14, Issue 2, 2024, Pages 15-29]
  • Ghamarizadeh, Mojtaba Experimental investigation of the mechanical behavior of the core composed of polyurethane foam and scoria mineral pumice for use in explosive energy absorbent sandwich panels [Volume 14, Issue 3, 2024, Pages 95-106]
  • Ghiasi Tabari, Nima Numerical Study of a Pulverized Coal Combustion Process In an Industrial Entrained Flow Reactor [Volume 14, Issue 1, 2024, Pages 45-62]
  • Ghomashi, Mohammad amin Implementation robust control technique to lateral stabilization for in-wheel motor electric vehicle [Volume 14, Issue 2, 2024, Pages 111-126]
  • Ghorbanpour Arani, A. Quasi-3D Buckling Analysis of FG Sandwich Plates with Piezoelectric Face-Sheets Based on Refined High-Order Shear Deformation Theory [Volume 14, Issue 5, 2024, Pages 67-86]

H

  • Hadadi, Morteza Thermodynamic analysis of an HDH water desalination system with a solar-driven absorption refrigeration cycle [Volume 14, Issue 3, 2024, Pages 11-25]
  • Hadizade, Amin Comparison of cooling performance in a microchannel with discrete heat sources under pressure gradient and electroosmotic driven [Volume 14, Issue 3, 2024, Pages 1-10]
  • Haghighi Poshtiri, Amin Comparison of cooling performance in a microchannel with discrete heat sources under pressure gradient and electroosmotic driven [Volume 14, Issue 3, 2024, Pages 1-10]
  • Haji Jafari, Mohammad Investigating the Influence of Maximum Camber, Amplitude and Frequency of Oscillation on the Hysteresis Characteristics of an Oscillating Airfoil [Volume 14, Issue 4, 2024, Pages 53-71]
  • Hashemi, Sayyed Hojat Application of Wavelet Analysis for Measurement of Fracture Energy in Drop Weight Tear Testing of API X65 Steel [Volume 14, Issue 4, 2024, Pages 87-99]
  • Hashemi Kachapi, Sayyid H. Comparison of nonclassical controllers on piezoelectric nanoresonator: nonlinear ‎frequency response and stability analysis [Volume 14, Issue 3, 2024, Pages 125-139]
  • Hashemi Kachapi, Sayyid H. Comparison of nonclassical controllers on piezoelectric nanoresonator: natural ‎frequency and pull in voltage analysis [Volume 14, Issue 5, 2024, Pages 109-120]
  • Hashemi Kachapi, S. Gh. Comparison of nonclassical controllers on piezoelectric nanoresonator: nonlinear ‎frequency response and stability analysis [Volume 14, Issue 3, 2024, Pages 125-139]
  • Hashemi Kachapi, S. Gh. Comparison of nonclassical controllers on piezoelectric nanoresonator: natural ‎frequency and pull in voltage analysis [Volume 14, Issue 5, 2024, Pages 109-120]
  • Hazrati, Sattar Numerical and Experimental Analysis of Jamming Phenomenon in Positioning of Circular-Section Workpiece on Horizontal Surface [Volume 14, Issue 1, 2024, Pages 63-75]
  • Heydari, MohamadReza Experimental determination of the parameters of ductile damage model of aluminum 5083 and numerical application of the calibrated model [Volume 14, Issue 2, 2024, Pages 127-138]
  • Heydari Meybodi, Mahdi On the use of J-integral criterion for fracture assessment of cracked rigid polyurethane foam loaded in mixed mode I/II and I/III [Volume 14, Issue 3, 2024, Pages 141-151]
  • Hoseini, Seyed Sajjad Investigation of the internal resonances of a beam with a local bistable nonlinear energy sink [Volume 14, Issue 6, 2025, Pages 33-42]
  • Hoseyni, Seyed Vahid Numerical and Experimental Analysis of Jamming Phenomenon in Positioning of Circular-Section Workpiece on Horizontal Surface [Volume 14, Issue 1, 2024, Pages 63-75]
  • Hosseini, Rouhollah Experimental investigation of the mechanical behavior of the core composed of polyurethane foam and scoria mineral pumice for use in explosive energy absorbent sandwich panels [Volume 14, Issue 3, 2024, Pages 95-106]
  • Hosseini, Seyed Majid Designing, Construction and Attitude Identification of a Portable Quadcopter Using Flight Test Data Based on Genetic Algorithm and Artificial Neural Networks [Volume 14, Issue 1, 2024, Pages 93-107]
  • Hosseini Kahsari, Seiyed Mohammad Javad Simulation and Optimization of a Hybrid Renewable System for Providing Electrical and Thermal Energy at Faculty of Engineering, Golestan University [Volume 14, Issue 3, 2024, Pages 57-76]
  • Hosseinzadeh Esfahani, Farid Numerical Study of Advance Ratio Effect on Dynamic Stall of the Helicopter Rotor Blade in Forward Flight [Volume 14, Issue 5, 2024, Pages 1-25]

I

  • Imani, Amin Thermodynamic Modeling and Simulation of a Geared Turbofan Engine with Hydromechanical Control System [Volume 14, Issue 4, 2024, Pages 31-51]

J

  • Jadidi, Amir Mohammad Experimental study of combination of air and thermo-electric cooling methods to increase the operating time and reduce the temperature of the lithium ion battery [Volume 14, Issue 3, 2024, Pages 27-42]
  • Jafari-Talookolaei, Ramazan-Ali Employing the Isogeometric Method for the Analysis of In-Plane and Out-of-Plane Vibrations of Multilayered Composite Beams [Volume 14, Issue 4, 2024, Pages 117-141]
  • Jahangiri, Mohammad Ali Fluid-structure interaction problem in the framework of Arbitrary Lagrangian-Eulerian (ALE) description using a monolithic approach in 2D [Volume 14, Issue 6, 2025, Pages 91-103]
  • Jahanian, Omid Performance simulation of a reactivity controlled compression ignition (RCCI) engine fueled with waste cooking oil biodiesel (WCO) with a focus on consumption trends of fuel constituents [Volume 14, Issue 2, 2024, Pages 1-13]
  • Jahedi, Reza Nonlinear dynamic response of truncated conical shells reinforced with carbon nanotubes with functional graded ceramic-metal matrix under harmonic excitation [Volume 14, Issue 3, 2024, Pages 43-56]
  • Jalali Aghchai, Abdolhossein Experimental and numerical investigating of distribution of thickness, drawing depth and forming limit diagram of steel sheet using Nakazima test [Volume 14, Issue 2, 2024, Pages 139-153]
  • Jamaati, Jafar Experimental Investigating the effects of delignification of common woods in Iran on the performance of Interfacial solar steam generators [Volume 14, Issue 4, 2024, Pages 73-85]
  • Jamshidi, Saeed Comparison of cooling performance in a microchannel with discrete heat sources under pressure gradient and electroosmotic driven [Volume 14, Issue 3, 2024, Pages 1-10]

K

  • Kaffash Mirzarahimi, Mahmoud Experimental investigation of the mechanical behavior of the core composed of polyurethane foam and scoria mineral pumice for use in explosive energy absorbent sandwich panels [Volume 14, Issue 3, 2024, Pages 95-106]
  • Kalantar, Vali Optimizing the performance of solar water heater energy storage system using phase change materials [Volume 14, Issue 2, 2024, Pages 95-110]
  • Karimian, S.M.H Numerical Study of Advance Ratio Effect on Dynamic Stall of the Helicopter Rotor Blade in Forward Flight [Volume 14, Issue 5, 2024, Pages 1-25]
  • Kasaeinia, Kimiya Investigation of the Effects of Pulsatile Blood Flow on Arterial Drug Uptake for Drug-eluting Coronary Stents [Volume 14, Issue 4, 2024, Pages 15-30]
  • Kayhani, Mohammad Hassan Performance analysis of a centrifugal compressor in a vapor compression refrigeration cycle with an energy-based approach [Volume 14, Issue 6, 2025, Pages 1-18]
  • Kazemi, Reza Implementation robust control technique to lateral stabilization for in-wheel motor electric vehicle [Volume 14, Issue 2, 2024, Pages 111-126]
  • Kazemzadeh-Parsi, Mohammad Javad Nonlinear dynamic response of truncated conical shells reinforced with carbon nanotubes with functional graded ceramic-metal matrix under harmonic excitation [Volume 14, Issue 3, 2024, Pages 43-56]
  • Khalife Soltani, Ali Investigating the effect of carbon fabric grammage on the mechanical and erosion properties of CFRP reinforced with ZrB2/SiC ceramic particles at a temperature of 3000°C [Volume 14, Issue 5, 2024, Pages 87-107]
  • Khanzadeh, Muhammad Investigation of the simultaneous effect of laser shock peening and graphene oxide coating on residual stress and fatigue corrosion properties of IN792 alloy [Volume 14, Issue 5, 2024, Pages 121-136]
  • Kheirkhah, Mahdi Study of the Effect of Exhaust Gases from a Sample Vehicle on the Drag Coefficient [Volume 14, Issue 5, 2024, Pages 39-52]
  • Khodarahmi, Hossein Experimental investigation of the mechanical behavior of the core composed of polyurethane foam and scoria mineral pumice for use in explosive energy absorbent sandwich panels [Volume 14, Issue 3, 2024, Pages 95-106]
  • Khodarahmi, Hossein Experimental and numerical analysis of the effect of the angle of impact of rigid projectiles on the depth of penetration and the amount of deflection in semi-infinite concrete targets [Volume 14, Issue 6, 2025, Pages 44-59]
  • Khoddami Maraghi, Zahra Quasi-3D Buckling Analysis of FG Sandwich Plates with Piezoelectric Face-Sheets Based on Refined High-Order Shear Deformation Theory [Volume 14, Issue 5, 2024, Pages 67-86]
  • Khoshkhoo, Rouhollah Experimental Study of Using Dielectric Barrier Discharge(DBD) Plasma Actuator as Virtual Winglet [Volume 14, Issue 1, 2024, Pages 77-92]

M

  • Mahdavy-Moghaddam, Hossein Numerical study of the performance parameters of the developed centrifugal compressor using a classical machine learning algorithm [Volume 14, Issue 4, 2024, Pages 1-14]
  • Majnooni, Omid Modeling and study of the explosion of gas storage tanks in compressed natural gas fuel stations (CNG) [Volume 14, Issue 2, 2024, Pages 45-63]
  • Malek-Jafarian, Majid Experimental study of the interaction of hydraulic jumps caused by an inclined jet and a vertical jet [Volume 14, Issue 1, 2024, Pages 17-28]
  • Malekzadie deerin,, Maherdad Compiling the RN dimensionless number to determine the boundary between aerothermodynamics and radiation heating for ablative noses [Volume 14, Issue 1, 2024, Pages 127-138]
  • Mani, Mahmood Experimental Study of Using Dielectric Barrier Discharge(DBD) Plasma Actuator as Virtual Winglet [Volume 14, Issue 1, 2024, Pages 77-92]
  • Masdari, Mehran Numerical Simulation and Aerodynamic Performance Investigation of Insect-inspired Propellers [Volume 14, Issue 1, 2024, Pages 1-16]
  • Mazloum-Ardakani, Javad Application of Wavelet Analysis for Measurement of Fracture Energy in Drop Weight Tear Testing of API X65 Steel [Volume 14, Issue 4, 2024, Pages 87-99]
  • Mehregan, Mahmood Performance analysis of a centrifugal compressor in a vapor compression refrigeration cycle with an energy-based approach [Volume 14, Issue 6, 2025, Pages 1-18]
  • Mirabdolah Lavasani, Arash Investigating the direct absorption planar collector with a central absorber tube for simultaneous surface and volume absorption and the effect of carbon nanofluid in improving thermal performance [Volume 14, Issue 2, 2024, Pages 65-76]
  • Mirabdolah Lavasani, Arash Modeling the hydraulic-thermal performance of a sinusoidal semi-porous channel with nanofluid flow and applying a magnetic field [Volume 14, Issue 3, 2024, Pages 107-123]
  • Mirhashemi, Seyed Sajad Investigation of the internal resonances of a beam with a local bistable nonlinear energy sink [Volume 14, Issue 6, 2025, Pages 33-42]
  • Mirtabaei, Seyed Mostafa Experimental and numerical simulation study of the performance of the polyphenylene sulfide thermoplastic composite reinforced with carbon fibers under high-velocity impact of projectiles with different geometries [Volume 14, Issue 1, 2024, Pages 109-126]
  • Modanloo, Vahid Selection of the optimal perforated structure in the axial loading of aluminum thin-walled tubes using multi-criteria decision-making: COPRAS method [Volume 14, Issue 1, 2024, Pages 139-145]
  • Mohammadi, Rafat Investigation of the Effects of Pulsatile Blood Flow on Arterial Drug Uptake for Drug-eluting Coronary Stents [Volume 14, Issue 4, 2024, Pages 15-30]
  • Mohandesi, Nima Free vibration analysis of a folded auxetic plate using the Levy-differential quadrature method [Volume 14, Issue 5, 2024, Pages 155-165]
  • Mohsenian, Hossein Numerical Study of a Pulverized Coal Combustion Process In an Industrial Entrained Flow Reactor [Volume 14, Issue 1, 2024, Pages 45-62]
  • Molaei, Abbas Improvemet Mixed convection heat transfer of liquid metal in a single channel heat sink under uniform external magnetic field [Volume 14, Issue 2, 2024, Pages 77-94]

N

  • Najafi, Ahmad Experimental study of combination of air and thermo-electric cooling methods to increase the operating time and reduce the temperature of the lithium ion battery [Volume 14, Issue 3, 2024, Pages 27-42]
  • Namashiri, Pezhman Electromechanical Modeling of the Heart in Healthy and Pulmonary Arterial Hypertension Cases [Volume 14, Issue 5, 2024, Pages 27-37]
  • Nekounam, Erfan Experimental investigation of ballistic limit and energy absorption in hybrid composites made of Kevlar and Ingra fibers [Volume 14, Issue 6, 2025, Pages 61-74]
  • Niazmand, Hamid Experimental Investigating the effects of delignification of common woods in Iran on the performance of Interfacial solar steam generators [Volume 14, Issue 4, 2024, Pages 73-85]
  • Nikandish, Pezhman Presenting a mathematical model for determining oil leakage in hydraulic directional control valves with spool [Volume 14, Issue 6, 2025, Pages 75-90]

P

  • Parvaz, Hadi Numerical and Experimental Analysis of Jamming Phenomenon in Positioning of Circular-Section Workpiece on Horizontal Surface [Volume 14, Issue 1, 2024, Pages 63-75]
  • Passandideh-Fard, Mahmoud Study of the Effect of Exhaust Gases from a Sample Vehicle on the Drag Coefficient [Volume 14, Issue 5, 2024, Pages 39-52]
  • Peyman, Safa Experimental and numerical analysis of the effect of the angle of impact of rigid projectiles on the depth of penetration and the amount of deflection in semi-infinite concrete targets [Volume 14, Issue 6, 2025, Pages 44-59]
  • Pirkandi, Jamasb Compiling the RN dimensionless number to determine the boundary between aerothermodynamics and radiation heating for ablative noses [Volume 14, Issue 1, 2024, Pages 127-138]
  • Pourjafar Chelikdani, Mohammad Dynamics of Confined Spherical Gas Bubbles in an Elastic Vessel Filled with a Thixotropic Fluid [Volume 14, Issue 3, 2024, Pages 77-93]
  • Pour Jafari Kasmaei, Mehdi Investigating the effect of carbon fabric grammage on the mechanical and erosion properties of CFRP reinforced with ZrB2/SiC ceramic particles at a temperature of 3000°C [Volume 14, Issue 5, 2024, Pages 87-107]

R

  • Rahmati, Ahmad Reza Investigating the effect of turbulator, nanofluid and geometry on the thermal performance of shell and tube heat exchangers [Volume 14, Issue 1, 2024, Pages 29-43]
  • Rahmati, Ahmad Reza Improvemet Mixed convection heat transfer of liquid metal in a single channel heat sink under uniform external magnetic field [Volume 14, Issue 2, 2024, Pages 77-94]
  • Ranjbar, Mohammad Investigating the effect of turbulator, nanofluid and geometry on the thermal performance of shell and tube heat exchangers [Volume 14, Issue 1, 2024, Pages 29-43]
  • Rasaee, Sajad Experimental determination of the parameters of ductile damage model of aluminum 5083 and numerical application of the calibrated model [Volume 14, Issue 2, 2024, Pages 127-138]
  • Rashidi, Saman Experimental study of combination of air and thermo-electric cooling methods to increase the operating time and reduce the temperature of the lithium ion battery [Volume 14, Issue 3, 2024, Pages 27-42]
  • Rasti Jahromi, Ali Thermodynamic Modeling and Simulation of a Geared Turbofan Engine with Hydromechanical Control System [Volume 14, Issue 4, 2024, Pages 31-51]
  • Rezaeepazhand, Jalil Fractography and Non-Destructive evaluation of fatigue damage in GFRP composites using natural frequency [Volume 14, Issue 5, 2024, Pages 53-66]
  • Roohi, Ehsan Study of the Effect of Exhaust Gases from a Sample Vehicle on the Drag Coefficient [Volume 14, Issue 5, 2024, Pages 39-52]
  • Rostami, Saadolahe Compiling the RN dimensionless number to determine the boundary between aerothermodynamics and radiation heating for ablative noses [Volume 14, Issue 1, 2024, Pages 127-138]

S

  • Sadeghy, Kayvan Dynamics of Confined Spherical Gas Bubbles in an Elastic Vessel Filled with a Thixotropic Fluid [Volume 14, Issue 3, 2024, Pages 77-93]
  • Sadegh Yazdi, Milad Experimental and numerical analysis of the effect of the angle of impact of rigid projectiles on the depth of penetration and the amount of deflection in semi-infinite concrete targets [Volume 14, Issue 6, 2025, Pages 44-59]
  • Sadripour, Saman Employing the Isogeometric Method for the Analysis of In-Plane and Out-of-Plane Vibrations of Multilayered Composite Beams [Volume 14, Issue 4, 2024, Pages 117-141]
  • Safi Jahanshahi, Amin Selection of the optimal perforated structure in the axial loading of aluminum thin-walled tubes using multi-criteria decision-making: COPRAS method [Volume 14, Issue 1, 2024, Pages 139-145]
  • Salehi, Gholamreza Modeling the hydraulic-thermal performance of a sinusoidal semi-porous channel with nanofluid flow and applying a magnetic field [Volume 14, Issue 3, 2024, Pages 107-123]
  • Salehi Abri, Sayyed Mohammadreza Experimental Study of Using Dielectric Barrier Discharge(DBD) Plasma Actuator as Virtual Winglet [Volume 14, Issue 1, 2024, Pages 77-92]
  • Seyedhosseini, Ali Investigation of the Effects of Pulsatile Blood Flow on Arterial Drug Uptake for Drug-eluting Coronary Stents [Volume 14, Issue 4, 2024, Pages 15-30]
  • Seyed Salehi, Hamid Experimental and numerical investigating of distribution of thickness, drawing depth and forming limit diagram of steel sheet using Nakazima test [Volume 14, Issue 2, 2024, Pages 139-153]
  • Shabani, Soheila Electromechanical Modeling of the Heart in Healthy and Pulmonary Arterial Hypertension Cases [Volume 14, Issue 5, 2024, Pages 27-37]
  • Shadmani, Mahmoud Nonlinear dynamic response of truncated conical shells reinforced with carbon nanotubes with functional graded ceramic-metal matrix under harmonic excitation [Volume 14, Issue 3, 2024, Pages 43-56]
  • Shafaghat, Rouzbeh Performance simulation of a reactivity controlled compression ignition (RCCI) engine fueled with waste cooking oil biodiesel (WCO) with a focus on consumption trends of fuel constituents [Volume 14, Issue 2, 2024, Pages 1-13]
  • Shafaghat, Rozbeh Thermodynamic analysis of an HDH water desalination system with a solar-driven absorption refrigeration cycle [Volume 14, Issue 3, 2024, Pages 11-25]
  • Shahriari, Behrooz Optimum design of impingement cooling system using differential evolution algorithm in the 2D-Nozzle linear of a turbofan engine [Volume 14, Issue 2, 2024, Pages 31-43]
  • Shakib, Tahere Employing the Isogeometric Method for the Analysis of In-Plane and Out-of-Plane Vibrations of Multilayered Composite Beams [Volume 14, Issue 4, 2024, Pages 117-141]
  • Sheikhpour, Nejat Modeling the hydraulic-thermal performance of a sinusoidal semi-porous channel with nanofluid flow and applying a magnetic field [Volume 14, Issue 3, 2024, Pages 107-123]
  • Sheikhzadeh, Ghanbar Ali Modeling and study of the explosion of gas storage tanks in compressed natural gas fuel stations (CNG) [Volume 14, Issue 2, 2024, Pages 45-63]
  • Sheykhi, Mohammad Numerical investigation of combustion and intake valve timing on the performance of TU5 spark ignition engine [Volume 14, Issue 6, 2025, Pages 19-32]
  • Solooki, Mohammad Numerical modeling of sandwich panel with different layers and core gradient under explosive impact [Volume 14, Issue 4, 2024, Pages 101-116]
  • Soltan Arani, Amir Hossein Quasi-3D Buckling Analysis of FG Sandwich Plates with Piezoelectric Face-Sheets Based on Refined High-Order Shear Deformation Theory [Volume 14, Issue 5, 2024, Pages 67-86]

T

  • Talebitooti, Mostafa Free vibration analysis of a folded auxetic plate using the Levy-differential quadrature method [Volume 14, Issue 5, 2024, Pages 155-165]
  • Talesh Amiri, Saleh Performance simulation of a reactivity controlled compression ignition (RCCI) engine fueled with waste cooking oil biodiesel (WCO) with a focus on consumption trends of fuel constituents [Volume 14, Issue 2, 2024, Pages 1-13]
  • Touiserkani, Mohammad Mahdi On the use of J-integral criterion for fracture assessment of cracked rigid polyurethane foam loaded in mixed mode I/II and I/III [Volume 14, Issue 3, 2024, Pages 141-151]
  • Turki, Farnoosh Experimental and numerical investigating of distribution of thickness, drawing depth and forming limit diagram of steel sheet using Nakazima test [Volume 14, Issue 2, 2024, Pages 139-153]

V

  • Valizadeh, Pouya Fractography and Non-Destructive evaluation of fatigue damage in GFRP composites using natural frequency [Volume 14, Issue 5, 2024, Pages 53-66]

Y

  • Yaghoubi Nejad, Yadollah Investigation of the simultaneous effect of laser shock peening and graphene oxide coating on residual stress and fatigue corrosion properties of IN792 alloy [Volume 14, Issue 5, 2024, Pages 121-136]

Z

  • Zabett, Ahad Fractography and Non-Destructive evaluation of fatigue damage in GFRP composites using natural frequency [Volume 14, Issue 5, 2024, Pages 53-66]
  • Zakeri Nazar, Yalda Numerical Simulation and Aerodynamic Performance Investigation of Insect-inspired Propellers [Volume 14, Issue 1, 2024, Pages 1-16]
  • Zarkesh, Mehran Numerical Study of a Pulverized Coal Combustion Process In an Industrial Entrained Flow Reactor [Volume 14, Issue 1, 2024, Pages 45-62]
  • Zia Shamami, Mojtaba Experimental investigation of the mechanical behavior of the core composed of polyurethane foam and scoria mineral pumice for use in explosive energy absorbent sandwich panels [Volume 14, Issue 3, 2024, Pages 95-106]
  • Zia Shemami, Mojtaba Experimental and numerical analysis of the effect of the angle of impact of rigid projectiles on the depth of penetration and the amount of deflection in semi-infinite concrete targets [Volume 14, Issue 6, 2025, Pages 44-59]