[1] M. Al-Malki, Z. Hussain, S. Garrett, and S. Calabretto, "Effects of parietal suction and injection on the stability of the Blasius boundary-layer flow over a permeable, heated plate," Phys. Rev. Fluids, vol. 6, 2021.
[2] P. Gao "Effects of wall suction/injection on the linear stability of flat Stokes layers," J. Fluid Mech., vol. 551, pp. 303-308, 03/25 2006.
[3] T. Friederich and M. J. Kloker, "Control of the secondary cross-flow instability using localized suction," J. Fluid Mech., Article vol. 706, pp. 470-495, 2012.
[4] R. Kant, N. Vinod, and U. Ghosh, "Stability and Control of the Flow in a Porous Channel," in IUTAM Bookseries, vol. 38, 2022, pp. 419-437.
[5] Y. Y. Xu, X. Li, H. J. Tan, H. X. Huang, and Y. Zhang, "Compression Corner Shock Wave/Boundary Layer Interaction Flow Control Based on Local Particles Injection," Tuijin Jishu/ J. Propul. Technol., Article vol. 44, no. 2, 2023, Art no. 2205088.
[6] M. Debiasi, M. Herberg, Y. Zeng, H. M. Tsai, and S. Dhanabalan, "Control of Flow Separation in S-Ducts via Flow Injection and Suction," in 46th AIAA Aerospace Sciences Meeting and Exhibit, (Aerospace Sciences Meetings: American Institute of Aeronautics and Astronautics, 2008.
[7] N. Riley, "On the control of laminar flow separation," Q. J. Mech. Appl. Math., Article vol. 57, no. 2, pp. 237-24, 2004.
[8] R. Seele, C. Chen, C. Bhamburkar, and I. Wygnanski, "Some effects of blowing, suction and trailing edge bluntness on flow separation from thick airfoils; computations & measurements," in 29th AIAA Applied Aerodynamics Conference 2011.
[9] J. D. Anderson, Fundamentals of Aerodynamics, fifth ed. McGraw-Hill Education, 2011.
[10] H. Schlichting and K. Gersten, Boundary-Layer Theory. Springer, 2017.
[11] A. M. Kuethe and C.-Y. Chow, Foundations of Aerodynamics: Bases of Aerodynamic Design, Fifth edition ed. John Wiley and Sons, 1998, p. 572.
[12] P. B. S. Lissaman, "Low-Reynolds-Number Airfoils," Annu. Rev. Fluid Mech., vol. 15(1), pp. 223-239, 1983.
[13] A. Kitagawa, P. Denissenko, and Y. Murai, "Effect of heated wall inclination on natural convection heat transfer in water with near-wall injection of millimeter-sized bubbles," Int. J. Heat Mass Transfer, Article vol. 113, pp. 1200-1211, 2017.
[14] S. L. Kokjohn and R. D. Reitz, "Investigation of charge preparation strategies for controlled premixed charge compression ignition combustion using a variable pressure injection system," Int. J. Engine Res., Article vol. 11, no. 4, pp. 257-282, 2010.
[15] S. Jahangirian, A. Ghafourian, M. Abarham, and M. H. Saidi, "Effect of vortex flow on heat transfer to combustion chamber wall," in Energy Conversion and Resources 2004: Fuels and Combustion Technologies, Energy, Nuclear Engineering, 2004, pp. 37-44.
[16] T. Seljak, U. Žvar Baškovič, and T. Katrašnik, "Spatially selective dilution - A novel approach for heat release control in continuous combustion," J. Environ. Manage., Article vol. 316, 2022, Art no. 115068.
[17] Z. Song, D. Chang, H. Sun, X. Cheng, and H. Wang, "Suppression of flow-induced resonant cavity noise using mass flow injection," Shengxue Xuebao/Acta Acustica, Article vol. 48, no. 1, pp. 225-237, 2023.
[18] H. E. Hafsteinsson, L. E. Eriksson, N. Andersson, D. R. Cuppoletti, E. Gutmark, and E. Prisell, "Supersonic jet noise reduction using steady injection and flapping injection," in 19th AIAA/CEAS Aeroacoustics Conference, 2013, p. 140.
[19] B. E. Schmidt, N. P. Bitter, H. G. Hornung, and J. E. Shepherd, "Injection into supersonic boundary layers," in AIAA J., 2016, vol. 54, 1 ed., pp. 161-173.
[20] Z. Wang, J. Chang, Y. Li, and C. Kong, "Investigation of shock wave control by suction in a supersonic cascade," Aerosp. Sci. Technol., Article vol. 108, 2021, Art no. 106382.
[21] J. Chang, Y. Du, S. Zheng, X. Duan, and Y. Liu, "Performance analysis of different influencing factors on film cooling and the internal relations with vortex structures," AIP Adv., Review vol. 9, no. 7, 2019, Art no. 070701.
[22] Z. Liu, W. Zhang, Y. Xie, Y. Ding, and Z. Feng, "Experimental Study on Influence of Mid-Passage Gap Leakage on Turbine Endwall Film Cooling Characteristics," Hsi-An Chiao Tung Ta Hsueh/ J. Xi'an Jiaotong Univ., Article vol. 57, no. 5, pp. 1-10, 2023.
[23] N. Balcazar-Arciniega, J. Rigola, and A. Oliva, "DNS of Mass Transfer in Bi-dispersed Bubbly Flows in a Vertical Pipe," in ERCOFTAC Series, vol. 31, 2024, pp. 55-61.
[24] A. K. Ray, Coulson and Richardson's Chemical Engineering: Volume 2B: Separation Processes (Coulson and Richardson's Chemical Engineering: Volume 2B: Separation Processes). 2023, pp. 1-833.
[25] H. Alvarez, "Teaching control into a mass transfer operations course," in Proceedings of the 2021 IEEE 5th Colombian Conference on Automatic Control, CCAC 2021, 2021, pp. 303-308.
[26] F. A. Versteeg, F. Picchioni, and G. F. Versteeg, "On the mass transfer of supercritical fluids, specifically super critical CO2: An overview," Chem. Eng. J., Review vol. 493, 2024, Art no. 152521.
[27] B. Özkaya, A. H. Kaksonen, E. Sahinkaya, and J. A. Puhakka, "Fluidized bed bioreactor for multiple environmental engineering solutions," Water Res., Review vol. 150, pp. 452-465, 2019.
[28] P. Le Cloirec, S. Giraudet, N. Cimetiere, P. F. Biard, A. Couvert, and D. Wolbert, "Process modeling and environmental engineering," Actual. Chim., Article no. 450, pp. 19-24, 2020.
[29] A. Sharifi Haddad, H. Hassanzadeh, J. Abedi, and Z. Chen, "Impact of adsorption on mass transfer in fractured reservoirs," in Society of Petroleum Engineers - SPE Heavy Oil Conference Canada 2012, 2012, vol. 2, pp. 1131-1138.
[30] J. Fan, S. Li, Z. Wu, and Z. Chen, "Diffusion and mixing in microfluidic devices," in Microfluid. Pharm. Appl.: From Nano/Micro Systems Fabrication to Controlled Drug Delivery, 2019, pp. 79-100.
[31] W. Y. Liu, W. Wang, X. J. Ju, Z. Liu, R. Xie, and L. Y. Chu, "Functional microparticles from multiscale regulation of multiphase emulsions for mass-transfer intensification," Chem. Eng. Sci., Article vol. 231, 2021, Art no. 116242.
[32] S. Shaheen, M. B. Arain, N. Ijaz, F. Z. Duraihem, and J. Hu, "Insights into metachronal propulsion's influence on Ellis fluid flow across tri-layers amid dynamic thermal transport: Theoretical study," ZAMM Z. Angew. Math. Mech., Article 2024.
[33] L. Reid, "An Introduction to Biomedical Computational Fluid Dynamics," in Adv. Exp. Med. Biol., vol. 1334, 2021, pp. 205-222.
[34] P. J. Cullen, Food Mixing: Principles and Applications (Food Mixing: Principles and Applications). 2009, pp. 1-292.
[35] J. Y. Oldshue, "Agitation," in Fermentation and Biochemical Engineering Handbook: Principles, Process Design, and Equipment: Third Edition, 2014, pp. 109-133.
[36] M. Farid, "Heat and Mass Transfer in Food Processing," in Handbook of Farm Dairy and Food Machinery, 2007, pp. 367-390.
[37] Q. Yuan, X. Zhou, F. Zeng, K. D. Knorr, and M. Imran, "Investigation of concentration-dependent diffusion on frontal instabilities and mass transfer in homogeneous porous media," Can. J. Chem. Eng., Article vol. 96, no. 1, pp. 323-338, 2018.
[38] M. A. Miranda, A. K. Yegya Raman, D. M. Lavenson, H. J. Subramani, S. A. Mohammad, and C. P. Aichele, "Gas Evolution Rates in Supersaturated Water-in-Oil Emulsions at Elevated Pressures," Energy Fuels, Article pp. 8176-8183, 2019.
[39] T. Kajiwara and Y. Nakayama, "Capturing the efficiency of a melt-mixing process for polymer processing," J. Chem. Eng. Jpn., Article vol. 44, no. 11, pp. 831-839, 2011.
[40] N. Balcázar, O. Antepara, J. Rigola, and A. Oliva, "DNS of Drag-Force and Reactive Mass Transfer in Gravity-Driven Bubbly Flows," in ERCOFTAC Ser., vol. 27, 2020, pp. 119-125.
[41] B. Sundén, "On computational heat transfer in industrial applications," in ASME 2013 Heat Transfer Summer Conf. Collocated with the ASME 2013 7th Int. Conf. on Energy Sustainability and the ASME 2013 11th Int. Conf. on Fuel Cell Science, Engineering and Technology, HT 2013, 2013, vol. 3.
[42] J. D. Ramsey and K. Bell, "Applications: Heat exchangers for the process and energy industries," in CRC Handbook of Thermal Engineering, Second Edition, 2017, pp. 459-500.
[43] R. Herrmann-Heber, S. F. Reinecke, and U. Hampel, "Dynamic aeration for improved oxygen mass transfer in the wastewater treatment process," Chem. Eng. J., Article vol. 386, 2020, Art no. 122068.
[44] D. S. N. Bharghava, T. Jana, and M. Kaushik, "A survey on synthetic jets as active flow control," Aerospace Systems, Review vol. 7, no. 3, pp. 435-451, 2024.
[45] M. Krstić, "Mixing control for jet flows," in Combustion Processes in Propulsion: Control, Noise, and Pulse Detonation, 2005, pp. 87-96.
[46] A. Meyer, B. M. Sloyan, K. L. Polzin, H. E. Phillips, and N. L. Bindoff, "Mixing variability in the Southern Ocean," J. Phys. Oceanogr., Article vol. 45, no. 4, pp. 966-987, 2015.
[47] C. Aeppli, M. Berg, O. A. Cirpka, C. Holliger, R. P. Schwarzenbach, and T. B. Hofstetter, "Influence of mass-transfer limitations on carbon isotope fractionation during microbial dechlorination of trichloroethene," Environ. Sci. Technol., Article vol. 43, no. 23, pp. 8813-8820.
[48] A. Vailati et al., "Diffusion in liquid mixtures," npj Microgravity, Review vol. 9, no, 2023, 1, Art no. 1.
[49] N. Ghasem, "Mass transfer modeling in nanofluids: Theoretical basics and model development," in Nanofluids and Mass Transfer, 2021, pp. 247-271.
[50] C. Kleinstreuer and Z. Xu, "Mathematical modeling and computer simulations of nanofluid flow with applications to cooling and lubrication," Fluids, Article vol. 1, no. 2, 2016, Art no. 16.
[51] J. Z. Jiang, S. Zhang, X. L. Fu, L. Liu, and B. M. Sun, "Review of gas–liquid mass transfer enhancement by nanoparticles from macro to microscopic," Heat Mass Transf./Waerme- Stoffuebertrag, Review vol. 55, no. 8, pp. 2061-2072.
[52] J. X. Duan, L. Y. Zhu, and Z. B. Wang, "Research Progress of Liquid Heterogeneous Mixing Process," petchem equipment., Review vol. 50, no. 1, pp. 47-52.
[53] B. N. Arzamasov and V. N. Simonov, "Circulation method for depositing diffusion coatings," Met. Sci. Heat Treat., Article vol. 52, no. 9-10, pp. 403-407.
[54] A. Brun, H. Dihang, and L. Brunel, "Film formation of coatings studied by diffusing-wave spectroscopy," Progress in Organic Coatings, Article vol. 61, no. 2-4, pp. 181-191.
[55] M. S. Tirumkudulu and V. S. Punati, "Solventborne Polymer Coatings: Drying, Film Formation, Stress Evolution, and Failure," Langmuir, Article vol. 38, no. 8, pp. 2409-2414.
[56] B. Ishtiaq, S. Nadeem, and J. Alzabut, "Thermal analysis of magnetized Walter's-B fluid with the application of Prabhakar fractional derivative over an exponentially moving inclined plate," Phys. Fluids, vol. 35.
[57] S. Ahmad, S. Ul Haq, F. Ali, I. Khan, and S. Eldin, "Free convection channel flow of couple stress casson fluid: A fractional model using Fourier’s and Fick’s laws," Front. Phys., vol. 11, p. 1031.
[58] S. Abbas, Z. Nisa, M. Nazar, M. Amjad, H. Ali, and A. Jan, "Application of Heat and Mass Transfer to Convective Flow of Casson Fluids in a Microchannel with Caputo-Fabrizio Derivative Approach," Arabian J. Sci. Eng., vol. 49.
[59] R. Reyaz, A. Q. Mohamad, Y. Lim, M. Saqib, and S. Shafie, "Analytical Solution for Impact of Caputo-Fabrizio Fractional Derivative on MHD Casson Fluid with Thermal Radiation and Chemical Reaction Effects," Fractal Fract., vol. 6, p. 38.
[60] S. Yang, H. W. Zhou, and W. G. Ren, "A Unified Fractional Derivative Model for Darcian and Non-Darcian Flow in Porous Media," presented at the ISRM International Symposium - EUROCK 2020, 2020.
[61] H. W. Zhou and S. Yang, "Fractional derivative approach to non-Darcian flow in porous media," J. Hydrol., vol. 566.
[62] J. Suzuki, M. Gulian, M. Zayernouri, and M. D'Elia, "Fractional Modeling in Action: a Survey of Nonlocal Models for Subsurface Transport, Turbulent Flows, and Anomalous Materials," J. Peridynamics Nonlocal Model., vol. 5.
[63] A. Milovanov and J. Rasmussen, "Turbulence spreading by resonant wave-wave interactions: A fractional kinetics approach," Phys. Rev. E, vol. 109.
[64] R. Reyaz, A. Q. Mohamad, Y. Lim, and S. Shafie, "Analytical Treatment for Accelerated Riga Plate on Fractional Caputo-Fabrizio Casson Fluid," CFD Lett., vol. 15.
[65] M. Shahrim et al., "Exact Solution of Fractional Convective Casson Fluid Through an Accelerated Plate," CFD Lett., vol. 13, pp. 15-25.
[66] A. Abouelregal, M. Marin, A. Foul, and S. S. Askar, "Coupled responses of thermomechanical waves in functionally graded viscoelastic nanobeams via thermoelastic heat conduction model including Atangana–Baleanu fractional derivative," Sci. Rep., vol. 14.
[67] V. Morales Delgado, J. F. Gómez-Aguilar, and M. Taneco-Hernández, "Analytical solution of the time fractional diffusion equation and fractional convection-diffusion equation," Rev. Mex. Fis., vol. 65, 2019.
[68] G. B. Jeffery, "L. The two-dimensional steady motion of a viscous fluid," Lond.Edinb.Dubl.Phil.Mag, vol. 29, no. 172, pp. 455-465, 1915.
[69] G. Hamel, "Spiralförmige Bewegungen zäher Flüssigkeiten," Math. Ann., vol. 84, no. 1, pp. 148-148, 1921.
[70] R. B. Bird, W. E. Stewart, and E. N. Lightfoot, Transport Phenomena (no. v. 1). Wiley, 2006.
[71] P. A. Davidson, An Introduction to Magnetohydrodynamics. Cambridge University Press, 2001.
[72] I. Podlubny, Fractional Differential Equations: An Introduction to Fractional Derivatives, Fractional Differential Equations, to Methods of Their Solution and Some of Their Applications. Academic Press, 1998.
[73] H. Ravanbod, M. Hajihasani, Y. Farjami, and E. Norouzi, "Developing an Adaptive Fractional Model of a Magnetic Structure using Evolutionary Algorithm," In 2008 IEEE International Conference on Computational Cybernetics, pp. 189-192. IEEE, 2008.
[74] Q. Zhao, B. Mao, X. Bai, J. Guo, and C. Chen, "Anisotropy of Flow and Heat Transfer of Gaseous MHD Flows in a Circular Tube Under the Control of Transverse Magnetic Field: A Preliminary Study," In Heat Transfer Summer Conference, vol. 85796, p. V001T20A004. American Society of Mechanical Engineers, 2022.
[75]ا. رحمتی و ع. ملایی "شبیهسازی عددی انتقال حرارت جابهجایی اجباری فلزات مایع در یک چاه گرمایی میکروکانال تحت میدان مغناطیسی"، مکانیک سازهها و شارهها، جلد 13، شماره 6، 137-121، 2024.
[76] H. Kobayashi, H. Shionoya, and Y. Okuno, "Turbulent duct flows in a liquid metal magnetohydrodynamic power generator," J. Fluid Mech., Article vol. 713, pp. 243-270, 2012.
)