[1] G. Welsch, R. Boyer, E.W. Collings, (1993) Materials Properties Handbook: Titanium Alloys, ASM International.
[2] A.R. Vahdati, M. Vahdati, (2018) Experimental Analysis the Effect of Lubricant and Ultrasonic Excitation of Hemispherical-head Tool on the Vertical Component of Forming Force in SPIF, J. SOLID FLUID Mech., 107-123 (In persian).
[3] M. Sadeghi, A. Abdullah, A. Fallahi, R. Abedini, (2015), Effect of ultrasonic vibrations on the activation, mobility and density of dislocations in metallic materials, J. Sound Vib., (In persian)
[4] Blaha F, Langenecker B (1955) Tensile deformation of zinc crystal under ultrasonic vibration. Naturwissenschaften 42: 556-560.
[5] Langenecker B (1966) Effects of ultrasounds on deformation characteristics of metals. IEEE Trans. Son Ultrason SU-13: 1–8.
[6] Nerubai M.S (1987) Effect Of Ultrasonic Vibrations On The Mechanical Properties Of Difficult-To Deform Materials. Kuibyshev Polytechnic Institute.Translated from Metallovedenie I TermicheskayaObrabotka, Metallov 4: 10-13.
[7] Yao Zh, Kim G, Faidley L, Zou Q, Mei D, Chen Z (2012) Acoustic softening and residual hardening in aluminum: Modeling and experiments. Int J Plast 39: 75–87.
[8] Yao Zh, Kim G, Faidley L, Zou Q, Mei D, Chen Z (2013) Acoustic Softening and Hardening of Aluminum in High-Frequency Vibration-Assisted Micro/Meso Forming. Mater Manuf Process 28(5): 584–588.
[9] Wen T, Wei L, Chen X, Pei Ch (2011) Effects of ultrasonic vibration on plastic deformation of AZ31 during the tensile process. Int. J. Miner. Metall. Mater. 18: 70-76.
[[1]0] Fartashvand V, Abdulah A, Sadough S.A (2017) Investigation of Ti-6Al-4V alloy acoustic softening. Ultrason Sonochem 38: 744-749.
[[1]1] Liu T, Lin J, Guan Y, Xie zh, Zhu L, Zhai J (2018) Effects of ultrasonic vibration on the compression of pure titanium. Ultrasonics 89: 26-33.
[[1]2] Zhao J, Su H, Wu Ch (2020) The effect of ultrasonic vibration on stress-strain relations during compression tests of aluminum alloys. J Mater Res Technol 9(6): 14895-14906.
[13] Dawson G.R, Winsper C.E, Sansome D.H (1970) Application of high- and low-frequency oscillations to the plastic deformation of metals. Metal Form 9: 254–261.
[[1]4] Endo T; Tasaki M; Kubo M; Shimada (1982) High temperature deformation of an Al-5 at% Mg alloy under combined high frequency stresses. Trans. J. JIM (46) 665-673.
[[1]5] Izumi O; Oyama K; Suzuki Y (1966) On the superimposing of ultrasonic vibration during compressive deformation of metals. Trans Jpn Inst Met 7 (3):158-161.
[[1]6] Winsper C.E, Sansome D.H (1968) The influence of oscillatory energy on the stresses during plastic deformation. J Inst Metals 96: 353–357.
[[1]7] Yao Ye, Pan Yue, Liu Shiqing (2020) Power ultrasound and its applications: A state-of-the-art review. Ultrason Sonochem 62: 104722.
[[1]8] ASTM Standard E9 (1989) Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature. ASTM Int DOI: 10.1520/E0009-89E01
[19] ASSAB XW-5, Uddeholm Sverker 3, www.assab.com.
[20] Lütjering, G. and J. C. Williams (2003). Titanium, Springer.
[21] Babu B (2008) Physically Based Model for Plasticity and Creep of Ti-6Al-4V, Licentiate Thesis, Department of Applied Physics and Mechanical Engineering, Lulea University of Technology.
[22] Prasad Y.V.R.K, Seshacharyulu T, Medeiros S. C, Frazier W, G (2001) A Study of Beta Processing of Ti-6Al-4V: Is it Trivial?. J Eng Mater Technol 123: 355-360.
[23] Seshacharyulu T, Medeiros S. C, Frazier W. G, Prasad Y.V.R.K. (2002) Microstructural mechanisms during hot working of commercial grade Ti-6Al-4V with lamellar starting structure. Mater Sci Eng A 325(1-2): 112-115.
[24] Tyapunina N.A; Blagoveshehenskii V.V, Zinenkova G. M; Ivashkin, Yu A (1982) Characteristics of plastic deformation under the action of ultrasound, Sov Phys J 6: 118-128.
[25] Nerubai M.S (1987) Effect of Ultrasonic Vibrations on The Mechanical Properties of Difficult-To Deform. Met Sci Heat Treat 4: 10-13.
[26] Lum I, Huang H, Pequegnat A, Chang B. H, Mayer M, Du D, Zhou Y (2009) Influence of superimposed ultrasound on deformability of gold. J. Appl. Phys. 106: 1-6.
[27] Abedini, R., et al. (2017). A Roadmap for Application of High Power Ultrasonic Vibrations in Metal Forming. Modares Mechanical Engineering 16(10): 323-334.
[28] Fartashvand, V., Abdullah, A., Sadough S.A (2017). Effects of high power ultrasonic vibration on the cold compaction of titanium. Ultrasonics Sonochemistry 36: 155-161.
[29] Abedini, R., et al. (2017). Ultrasonic hot powder compaction of Ti-6Al-4V. Ultrasonics Sonochemistry 37: 640-647.
)