[1] Lee HS, Yoon JH, Park CH, Ko YG, Shin DH, Lee CS (2007) A study on diffusion bonding of superplastic Ti–6Al–4V ELI grade. J Mater Process Technol 187-188: 526-529.
[2] Kundu S, Sam S (2013) Diffusion bonding of microduplex stainless steel and Ti alloy with and without interlayer: interface microstructure and strength properties. Metall Mater Trans A 45: 371-383.
[3] Kundu S, Thirunavukarasu G (2016) Structure and properties correlation of diffusion bonded joint of duplex stainless steel and Ti–6Al–4V with and without Ni–17Cr–9Fe alloy interlayer. Weld word 60: 793-811.
[4] Thirunavukarasu G (2014) Effect of bonding temperature on interfacial reaction and mechanical properties of diffusion-bonded joint between Ti-6Al-4V and 304 stainless steel using nickel as an intermediate material. Mater Sci 45: 2067- 2088.
[5] Muthupandi V, Muralimuhan CH (2014) Properties of friction welding titanium-stainless steel joints with a nickel interlayer. Procedia Mater Sci 5: 1120 -1129.
[6] Muralimuhan CH, Ashfaq M, Ashiri R,
Muthupandi V,
Sivaprasad K (2016) Analysis and characterization of the tole of Ni interlayer in the friction welding of titanium and 304 austenitic stainless steel. Metall Mater Trans A 47: 347–359.
[7] Pardal G, Ganguly S, Williams S, Vaja J (2015) Dissimilar metal joining of stainless steel and titanium using copper as transition metal. Procedia Mater Sci 5: 1150 – 1159.
[8] Kundu S (2011) Interface microstructure and strength properties of Ti6Al4V and microduplex stainless steel diffusion bonded joints. Mater Design 32: 2997-3003.
]9[ شجاعی زوارم ع (1391) جوشکاری غیرهمجنس آلیاژ حافظه دار نایتینول به Ti6Al4V با استفاده از لیزر ضربانی Nd:YAG و بررسی خواص اتصال. پایان نامه کارشناسی ارشد، دانشگاه تهران.
[10] Shiue RK, Wu SK, Chan CH, Huang CS (2006) Infrared brazing of Ti6Al4V and 17-4PH stainless steel with a nickel barrier layer. Metall Mater Trans A 37: 2207–2217
[11] Ghosh M, Chatterjee S (2005) Effect of interface microstructure on the bond strength of the diffusion welded joints between titanium and stainless steel. Mater Charact 54: 327– 337
[12] He P, Zhang J, Zhou R, Li X (1999) Diffusion bonding technology of a titanium alloy to a stainless steel web with a Ni interlayer. Mater Charact
43: 287-292.
[13] Kundu S, Mishra B, Olson DL, Chatterjee S (2013) Interfacial reactions and strength properties of diffusion bonded joints of Ti64 alloy and 17-4PH stainless steel using nickel alloy interlayer. Mater Design 51: 714–722.
[14] Sam S, Kundu S, Chatterjee S (2012) Diffusion bonding of titanium alloy to micro-duplex stainless steel using a nickel alloy interlayer: Interface microstructure and strength properties. Mater Design 40: 237-244.
[15] Kundu S, Sam S,
Mishra B, Chatterjee S (2014) Diffusion bonding of microduplex stainless steel and Ti alloy with and without interlayer: interface microstructure and strength properties. Metall Mater Trans A 45: 371–383.
[16] Vigraman T (2021) Liquid-solid phase reaction products formation in the diffusion welded joints made between Ti-6Al-4V and AISI 304L with brass interlayer. Mater Today 42(2): 607-617.
[17] Kumar R, Balasubramanian M (2020) Analysis and comparison of diffusion bonded and friction welded Ti-6Al-4V and stainless steel joints with copper as interlayer. Mater Today 21(3): 1467-1473.
[18] Sabetghadam H, Zarei Hanzaki A, Araee A, Hadian A (2010) Diffusion bonding characteristics of 410 stainless steel/Cu with Ni interlayer. J Mater Sci Technol 26: 163-169.
[19] Ranjan Kumar R, Kumar Gupta
R,
Sarkar A, Prasad MJNV (2022) Vacuum diffusion bonding of α‑titanium alloy to stainless steel for aerospace applications: Interfacial microstructure and mechanical characteristics. Mater Charact
183: 111607.
[20] Atasoy E, Kahramanb N (2008) Diffusion bonding of commercially pure titanium to low carbon steel using a silver interlayer. Mater Charact 59: 1481-1490.
[21] Kundu S, Ghosh M, Laik A, Bhanumurthy K, Kale GB, Chatterjee S (2005) Diffusion bonding of commercially pure titanium to 304 stainless steel using copper interlayer. Mater Sci Eng A 407:154–160.
[22] Surendar A, Lucas A, Abbas M,
Rahim R, Salmani M (2019) Transient liquid phase bonding of stainless steel 316 L to Ti-6Al-4 V using Cu/Ni multi-interlayer: microstructure, mechanical properties, and fractography. Weld word 63: 1025-1032.
[23] Aleman B, Gutiérrez I,
Urcola JJ (1997) The use of kirkendall effect for calculating intrinsic diffusion coefficients in a 316L/Ti6242 diffusion bonded couple. Scripta Mater 36: 509-515.
[24] Ghosh M, Samar D, Banarjee PS, Chatterjee S (2005) Variation in the reaction zone and its effects on the strength of diffusion bonded titanium–stainless steel couple. Mater Sci Eng A 390: 217-226.
[25] سبکتین ریزی م، رضوی س غ، مناجاتی زاده ح (1391) اتصال نوردی تیتانیوم به فولاد با استفاده از لایه میانی نیکل. مجله مواد نوین 3 (2): 67-76.
[26] Keyzer JD, Cacciamani G, Dupin N, Wollants P (2009) Thermodynamic modeling and optimization of the Fe-Ni-Ti system. Calphad 33: 109-123.
)