[1] Ghazikhani M and Shahab-Ahmadi M (2010) Investigation of the Exhaust Silencer Irreversibility and the Sound Intensity Emitted from the Exhaust in Diesel Engines. J. Applied and Comput. Sci. Mech., 21(1), 75-88 [In Persian].
[2] Talesh Amiri S, Shafaghat R, Jahanian O and Alamian, R (2024) Performance simulation of a reactivity controlled compression ignition (RCCI) engine fueled with waste cooking oil biodiesel (WCO) with a focus on consumption trends of fuel constituents. J. Sol. and Fluid Mech., 14(2), 1-13 [In Persian].
[3] Chamesara S and Mirsalim SM (2016) Investigation of the effect of air intake pressure and fuel injection parameters on upgrading power and emissions of heavy duty diesel engine. J. Sol. and Fluid Mech., 6(4), 239-247 [In Persian].
[4] Azarkhazin J, Aliakbari K, Sheykhi M and Delavari SMM (2025) Numerical investigation of combustion and intake valve timing on the performance of TU5 spark ignition engine. J. Sol. and Fluid Mech., 14(6), 19-32 [In Persian].
[5] Dastourani H, Mohammadian A and Ghazikhani M (2022) Evaluation of Changes in Soot Formation with Variation of Start Angle of Fuel Injection in Diesel Engine. J. Engine Res., 24(24), 37-49 [In Persian].
[6] Farrell PV, Chang CT and Su TF (1996) High pressure multiple injection spray characteristics. SAE transactions, 1271-1280.
[7] De Risi A, Donateo T and Laforgia D (2003) Optimization of the combustion chamber of direct injection diesel engines. SAE transactions, 1437-1445.
[8] Matsuo S, Kawabata Y, Okamoto K and Amano T (2007) A Numerical Study Of Effects Of Combustion Chamber Shape On Pre- Chamber. Tokyo Gas Co, Ltd.
[9] Maji L, Liangshan X and Xiong L (2011) Numerical simulation of the effects of combustion chamber geometry on nonroad diesel engine performance. In 2011 Int. Conference on Electric Information and Control Eng., 2407-2411.
[10] Beroun S, Brabec P, Dvořák V and Maleček F (2012) Compression Chamber of an SI Engine with Increased Turbulence. J. of Middle European Construction and Design of Cars, 1, 15-21.
[11] Şener R and Gül M Z (2021) Optimization of the combustion chamber geometry and injection parameters on a light-duty diesel engine for emission minimization using multi-objective genetic algorithm. Fuel, 304, 121379.
[12] Hao C, Zhang Z, Wang Z, Bai H, Li Y and Lu Z (2022) Investigation of spray angle and combustion chamber geometry to improve combustion performance at full load on a heavy-duty diesel engine using genetic algorithm. Energy Convers. Manag., 267, 115862.
[13] Feng S, Zhang S, Zhang H and Shi J (2024) Effect of nozzle geometry on combustion of a diesel-methanol dual-fuel direct injection engine. Fuel, 357, 129734.
[14] Temizer I and Cihan O (2024) Experimental Investigation of New Combustion Chamber Geometry Modification on Engine Performance, Emission, and Cylinder Liner Microstructure for a Diesel Engine. J. Energy Res. Tech., 146(12), 121201.
[15] Li Y, Huang L, Chen Y and Tang W (2024) Design and optimization of combustion chamber geometry and fuel spray targeting of a natural gas/biodiesel dual direct injection engine. Energy, 311, 133406.
[16] Doppalapudi AT, Azad AK, Khan MMK and Oo AMT (2025) Effect of different chamber geometries on combustion formation to reduce harmful emissions. Appl. Thermal Eng., 261, 125073.
[17] Li L, Zheng Z, Rao S, Li Q, Tang X and Deng W (2025) Effect of combustion chamber geometry on performance and emissions of direct injection hydrogen engines. Fuel, 382, 133500.
[18] Zhu Z, Li Y, Yang Z, Xie Y, Sun C and Xia Y (2025) Optimization of combustion chamber geometry for a two-stroke spark-ignited direct-injection opposed-piston rod-less aviation kerosene engine. Fuel, 381, 133503.
[19] Djavareshkian MH and Ghasemi A (2009) Investigation of jet break-up process in diesel engine spray modelling. J. Appl. Sci., 9(11), 2078-2087.
[20] Beale JC and Reitz RD (1999) Modeling spray atomization with the Kelvin-Helmholtz/Rayleigh-Taylor hybrid model. Atomization and sprays, 9(6).
[21] Dukowicz JK (1979) Quasi-steady droplet phase change in the presence of convection (No. LA-7997-MS). Los Alamos National Lab.(LANL), Los Alamos, NM (United States).
[22] Naber JD and Reitz RD (1988) Modeling engine spray/wall impingement. SAE transactions, 118-140.
[23] Sazhin SS, Sazhina EM, Heikal MR, Marooney C and Mikhalovsky SV(1999) The Shell autoignition model: a new mathematical formulation. Combustion and flame, 117(3), 529-540.
[24] Magnussen BF and Hjertager BH (1977) On mathematical modeling of turbulent combustion with special emphasis on soot formation and combustion. In Sym. (Int.) on Combusion, 16(1), 719-729.
[25] Zeldovich YB, Sadovnikov PY and Frank Kamenetskii DA (1947) Oxidation of Nitrogen in Combustion. Institute of Chemical Physics, Moscow-Leningrad, 1947.
[26] Heywood JB (1979) Pollutant formation and control in spark-ignition engines. Prog. in Energy and Combus. Sci., 229-258.
[27] AVL FIRE user manual V. 8.3; 2004.
[28] Ricart LM, Xin J, Bower GR and Reitz RD (1997) In-Cylinder Measurement and Modeling of Liquid Fuel Spray Penetration in a Heavy-Duty Diesel Engine. SAE Paper 971591.
)