[1] Yuan Y, Abdullah M, Sajadi SM, Heidarshenas B, Malekshah EH, Aybar HŞ (2024) Numerical investigation of the effect of changing the geometry of a U-shaped fuel cell channel with asymmetric gas flow and its effect on hydrogen consumption. Int J Hydrogen Energy 50: 1167-1178.
[2] Alaedini AH, Tourani HK, Saidi M (2023) A review of waste-to-hydrogen conversion technologies for solid oxide fuel cell (SOFC) applications: Aspect of gasification process and catalyst development. J Environ Manage 329: 117077.
[3] Ganjian M, Alirezapouri MA, Farahabadi HB (2024) Fuel Cell-Based Hybrid Ship Design. J Solid Fluid Mech 14(2): 15-29.
[4] Yang X, Meng X, Sun J, Song W, Sun S, Shao Z (2023) Study on internal dynamic response during cold start of proton exchange membrane fuel cell with parallel and serpentine flow fields. J Power Sources 561: 232609.
[5] Qiao JN, Guo H, Ye F, Chen H (2024) A nonlinear contraction channel design inspired by typical mathematical curves: Boosting net power and water discharge of PEM fuel cells. Appl Energy 357:122474.
[6] Meng H, Song J, Guan P, Wang H, Zhao W, Zou Y, Ding H, Wu X, He P, Liu F, Zhang Y (2024) High ion exchange capacity perfluorosulfonic acid resine proton exchange membrane for high temperature applications in polymer electrolyte fuel cells. J Power Sources 602: 234205.
[7] Lim K, Vaz N, Lee J, Ju H (2020) Advantages and disadvantages of various cathode flow field designs for a polymer electrolyte membrane fuel cell. Int J Heat Mass Transf 163: 120497.
[8] Qiu D, Peng L, Lai X, Ni M, Lehnert W (2019) Mechanical failure and mitigation strategies for the membrane in a proton exchange membrane fuel cell. Renew Sustain Energy Rev 113: 109289.
[9] Hami M, Mahmoudimehr J (2025) Influence of flow configuration on heat-up and start-up processes of multi-channel solid oxide fuel cell: A comprehensive multi-criteria study. Appl Therm Eng 264: 125526.
[10] Park J, Li X (2007) An experimental and numerical investigation on the cross flow through gas diffusion layer in a PEM fuel cell with a serpentine flow channel. J Power Sources 163(2):853-863.
[11] Ferng YM, Su A, Lu SM (2008) Experiment and simulation investigations for effects of flow channel patterns on the PEMFC performance. Int J Energy Res 32(1):12-23.
[12] Obayopo SO, Bello-Ochende T, Meyer JP (2012) Modelling and optimization of reactant gas transport in a PEM fuel cell with a transverse pin fin insert in channel flow. Int J Hydrogen Energy 37(13): 10286-10298.
[13] Bilgili M, Bosomoiu M, Tsotridis G (2015) Gas flow field with obstacles for PEM fuel cells at different operating conditions. Int J Hydrogen Energy 40(5): 2303-2311.
[14] Toghyani S, Nafchi FM, Afshari E, Hasanpour K, Baniasadi E, Atyabi S (2018) Thermal and electrochemical performance analysis of a proton exchange membrane fuel cell under assembly pressure on gas diffusion layer. Int J Hydrogen 43(9): 4534-4545.
[15] Chen H, Liu B, Zhang T, Pei P (2019) Influencing sensitivities of critical operating parameters on PEMFC output performance and gas distribution quality under different electrical load conditions. Appl Energy 255: 113849.
[16] Rezazadeh S, Rasouli Garaveran M, Ahmadi N, Sadeghi H (2020) Experimemtal and Numerical Analysis of Bipolar width and Gas Channels Geometrical Configuration Effect on Proton Exchange Membrane Fuel cell. J Solid Fluid Mech 10(4): 357-372.
[17] Xia L, Xu Q, He Q, Ni M, Seng M (2021) Numerical study of high temperature proton exchange membrane fuel cell (HT-PEMFC) with a focus on rib design. Int J Hydrogen Energy 46(40): 21098-21111.
[18] Ghasabehi M, Shams M, Kanani H (2021) Multi-objective optimization of operating conditions of an enhanced parallel flow field proton exchange membrane fuel cell. Energy Convers Manag 230: 113798.
[19] Rosli MI, Lim BH, Majlan EH, Husaini T, Daud WRW, Lim SF (2022) Performance analysis of PEMFC with single-channel and multi-channels on the impact of the geometrical model. Energies 15(21):7960.
[20] Pashaki MK, Mahmoudimehr J (2023) Performance superiority of an arc-shaped polymer electrolyte membrane fuel cell over a straight one. Int J Hydrogen Energy 48(36): 13633-13649.
[21] Ashrafi H, Ahmadi SN, Pormahmod N, Mirzaee I, Damya A, Khalilzadegan A (2023) Investigating the effect of the geometry of gas injection channels on the performance and dynamic behavior of the polymer electrolyte membrane fuel cell. J Solid Fluid Mech 13(2): 121-128.
[22] Zahed RP, Mahmoudimehr J, Amanifard N (2023) Performance superiority of a polymer electrolyte membrane fuel cell with corrugated gas diffusion layer: A numerical study. Int J Hydrogen Energy 48(87):34018-34033.
[23] Fu L, Lin H, Liu J, Hua Z, Qiu N (2024) Optimization of sinusoidal wave-like channel design for HT-PEMFCs based on genetic algorithm. Int J Heat Mass Transf 232: 125964.
[24] Yang X, Xiang Q, Fang D, Sun S, Hao J, Xie F, Shao Z (2024) Simulation and experimental investigation of a novel chain-shaped flow field for proton exchange membrane fuel cell. Energy Convers Manag 315:118797.
[25] Li H, Xu B, Lu G, Du C, Huang N (2021) Multi-objective optimization of PEM fuel cell by coupled significant variables recognition, surrogate models and a multi-objective genetic algorithm. Energy Convers Manag 236:114063.
[26] Akbari MH, Rismanchi B (2008) Numerical investigation of flow field configuration and contact resistance for PEM fuel cell performance. Renew Energy 33(8):1775-1783.
[27] Siegel NP, Ellis MW, Nelson DJ, von Spakovsky MR (2004) A two-dimensional computational model of a PEMFC with liquid water transport. J Power Sources 128: 173-184.
[28] Mahmoudimehr J, Darbandi A (2016) Technical study of a PEM fuel cell on the Psychrometric chart. Int J Hydrogen Energy 41(1): 607-613.
[29] Guvelioglu GH, Stenger HG (2005) Computational fluid dynamics modeling of polymer electrolyte membrane fuel cells. J Power Sources 147(1-2):95-106.
[30] Bilgili M, Bosomoiu M, Tsotridis G (2015) Gas flow field with obstacles for PEM fuel cells at different operating conditions. Int J Hydrogen Energy 40(5): 2303-2311.
[31] Torkavannejad A, Sadeghifar H, Pourmahmoud N, Ramin F (2015) Novel architectures of polymer electrolyte membrane fuel cells: efficiency enhancement and cost reduction. Int J Hydrogen Energy 40(36):12466-12477.
[32] Kahveci EE, Taymaz I (2018) Assessment of single-serpentine PEM fuel cell model developed by computational fluid dynamics. Fuel 217: 51-58.
)