[1] Andrei D, Mars L, Silberschmidt V (2012) Behaviour of semi-crystalline thermoplastic polymers: Experimental studies and simulations. Comp Mater Sci 52: 139-146.
[2] SassoM, PalmieriG, ChiappiniG, AmodioD (2008) Characterization of hyperelastic rubber-like materials by biaxial and uniaxial stretching tests based on optical methods. Polym Test
27(8): 995-1004.
[3] Kim B, Lee S, Lee J, Cho S, Park H, Yeom S, park S (2011) A comparison among neo-hookean model, mooney- rivlin model, and ogden model for chloroprene rubber. IJPEM 13(5): 759-764.
[4] Shokoohi S, Naderi G, Kharazmkia M, Ghoreishy MH (2015) Hyperelastic model analysis of stress-strain behavior in polybutadiene/ethylene-propylene dieneterpolymernanocomposites. J Vinyladdit Technol.
[5] Arriga A, Lazkano JM, Pagaldai R, Zaluda AM, Hernandez R, Atxurra R, Chrysostomou A (2007) Finite-element analysis of quasi-static characterization tests in thermoplastic materials: Experimental and numerical analysis results correlation with ANSYS. Polym Test 26: 854-869.
[6] Avalle M, Belingardi G, Montanini R (2001) Characterization of polymeric structural foams under compressive impact loading by means of energy-absorption diagram. Int J Impact Eng 25: 455-472.
[7] Viot P (2009) Hydrostatic compression on polypropylene foam. Int J Impact Eng 36(7): 975-989.
[8] Pawlikowski M (2013) Non-linear approach in visco-hyperelastic constitutive modelling of polyurethane nanocomposite. Mech Time-Depend Mater 10: 1043-1056.
[9] Alipour A, Naderi G, Ghoreishy H (2013) Effect of nanoclay content and matrix composition on properties and stress–strain behavior of NR/EPDM nanocomposites. J Appl Polym Sci
127(2): 1275-1284.
[10] Saavedra Flores EI, Dhikari S, Friswell MI, Scarpa F (2011) Hyperelastic finite element model for single wall carbon nanotubes in tension. Comp Mater Sci 50(1): 1083-1087.
[11] David C, David I, Shreiber Emilios K, Dimitriadis FH (2009) Spherical indentation of soft matter beyond the Hertzian regime: numerical and experimental validation of hyperelastic models. Biomech Model Mechanobiol 8: 345-358.
[12] Danielsson M, Parks DM, Boyce MC (2004) Constitutive modeling of porous hyperelastic materials. Mech Mater 36(4): 347-358.
[13] Bonet J, Wood RD (1997) Nonlinear continuum mechanics for finite elementanalysis. Melbourne: Cambridge University Press.
[14] Shabana AA (2008) Computational continuum mechanics.Melbourne: Cambridge UniversityPress.
[15] British Standard BS 903-5 (2004) Physical testing of rubber – Part 5: Guide to theapplication of rubber testing to finite element analysis.
[16] Ogden RW (1972) Large Deformation isotropic elasticity - on the correlation of theory and experiment for incompressible rubberlike solids. Proceedings Royal Society: 565-584.
[17] Memarian S, Fereidoon A, Albooyeh AR, Tarahomi S (2014) Influence of mesoporous silica and hydroxyapatite nanoparticles on the mechanical and morphological properties of polypropylene. Mater Design 57: 201-210.
)