Thermal Performance Modeling of Liquid in Evaporator with Spherical Microstructures and Conical Micropillars

Authors

Associate Professor Head of LNG Research Laboratory School of Mechanical Engineering, Iran University of Science and Technology, 16846, Tehran, Iran.

Abstract

The heat transfer performance of passive two-phase cooling devices such as heat pipes and vapor chambers is mainly depend on the topology and geometry of wick and evaporator microstructures. The desired characteristics of evaporator microstructures are high permeability, high wicking capability and large extended meniscus area that sustains thin-film evaporation which choices of scale and porosity lead to trade-offs between the desired characteristics. In the present study, the free-surface shapes of the static liquid meniscus in spherical microstructures and conical micropillar were modeled using gradient decent algorithm of Surface Evolver software and the non-dimensional capillary pressure was determined based on curvature of surface. Permeability and heat transfer coefficient were computed using Fluent software as functions of the nondimensional geometrical parameter and the contact angle between the liquid and solid. Based on these performance parameters, due to high heat contact surface, decrease of cross section, increase of permeability and increase of thin film liquid due to extention of liquid on inclined surface, conical microstructures provide more efficient and desirable geometry for wicking and thin-film evaporation. The solid-liquid contact angle and geometrical parameter that yield the best performance were also identified.

Keywords

Main Subjects

References

[1] Reay D, McGlen R, Kew P (2014) Heat pipes: Theory, design and applications. 6nd edn. Elsevier Ltd.
[2] Faghri A (2012) Review and advances in heat pipe science and technology. J Heat Trans-T ASME 134(12): 123001.
[3] Ranjan R, Murthy JY, Garimella SV (2009) Analysis of the wicking and thin-film evaporation characteristics of microstructures. J Heat Trans-T ASME 131(10): 101001.
[4] Weibel JA, Garimella SV, North MT (2010) Characterization of evaporation and boiling from sintered powder wicks fed by capillary action. Int J Heat Mass Tran 53 (19-20): 4204-4215.
[5] Altman DH, Wasniewski JR, North MT, Kim SS, Fisher TS (2011) Development of micro/nano engineered wick-based passive heat spreaders for thermal management of high power electronic devices. Proceedings of the ASME InterPACK Portland. 
[6] Ranjan R, Murthy JY, Garimella SV (2011) A microscale model for thin-film evaporation in capillary wick structures. Int J Heat Mass Tran 54 (1-3): 169-179.
[7] Dhavaleswarapu HK, Migliaccio CP, Garimella SV, Murthy JY (2009) Experimental investigation of evaporation from low-contact-angle sessile droplets. Langmuir: 26(2): 880-888.
[8] Nam Y, Sharratt S, Byon C, Kim SJ, Ju YS (2010) Fabrication and characterization of the capillary performance of superhydrophilic Cu micropost arrays. J Microelectromech S 19(3): 581-588.
[9] Cui HH, Lim KM (2009) Pillar array microtraps with negative dielectrophoresis. Langmuir 25(6): 3336.
[10] Nagrath S, Sequist LV, Maheswaran S, Bell DW, Irimia D, Ulkus L, Ryan P (2007) Isolation of rare circulating tumour cells in cancer patients by microchip technology. Nature 450(7173): 1235-1239.
[11] Hilden JL, Trumble, KP (2003) Numerical analysis of capillarity in packed spheres: Planar hexagonal-packed spheres. J Colloid Interf Sci 267(2): 463-474.
[12] Saha AA, Mitra SK, Tweedie M, Roy S, McLaughlin J (2009) Experimental and numerical investigation of capillary flow in SU8 and PDMS microchannels with integrated pillars. Microfluid Nanofluid 7: 451-465.
[13] Xiao R, Enright R, Wang EN (2010) Prediction and optimization of liquid propagation in micropillar arrays. Langmuir 26(19): 15070-15075.
[14]  صفاری ح، میرزاقیطاقی الف، رحیمی ع (1394) مدل‌سازی فشار مویینگی میکروسیالات در میکروساختارها با نرم افزار Surface Evolver. مجله علمی پزوهشی دینامیک سازه ها و شاره ها 255-247 :(3)5.
[15] Hong DP, Byon C (2014) Analytic correlation for the capillary pressure of micro-square-pillar arrays. Int J Precis Eng Man 15(12): 2677-2680.
[16] Byon Ch, Kim SJ (2014) Study on the capillary performance of micro-post wicks with non-homogeneous configurations. Int J Heat Mass Tran 68: 415-421.
[17] Ding C, Meinhart CD, MacDonald NC (2010) Surface Modifications of bulk micromachined titanium pillar arrays – A wicking material for thin flat heat pipes. Proceedings of the ASME Micro/Nanoscale Heat and Mass Transfer International Conference 415-419.
[18] Iverson BD, Davis TW, Garimella SV, North MT, Kang SS (2007) Heat and mass transport in heat pipe wick structures. J Thermophys Heat Tr 21(2): 392-404.
[19] Whitaker S (1986) Flow in porous media I: A theoretical derivation of Darcy's law. Transport Porous Med 1(1): 3-25.
[20] Finn R (1999) Capillary surface interfaces. Notices Amer Math Soc 46(7): 770-781.
[21] Cengel YA (2003) Heat transfer a practical approach.
[22] Scharge RW (1953) A theoretical study of interface mass transfer.
Journal of Solid and Fluid Mechanics
Volume 6, Issue 4
January and February 2016
Pages 193-204

Files

Share

How to cite

Statistics