An analysis of stresses evaluation efficacy in adhesive single-lap joints

Authors

1 Shahid Chamran university

2 Prof,. Mech Dep,. Shahid Chamran university

Abstract

In this paper, at first stress distribution in a single-lap joint between composite laminates by first order shear deformation theory with and without the presence of longitudinal strain has been evaluated. Adhesive layer supposed to be isotropic and adherents assumed to be orthotropic laminates. A new improved method of displacement theory has been used to determine stresses distribution. The results of this analytical solution have been compared by the results of finite element and it has been revealed that both methods have similar results. The advantage of this new method compared to classic method is that it has a higher Compatibility by finite element results. In shear stress there is no significant improvement. In the other hand it has been declared that the method has assumed length strain in adhesive layer has a higher accuracy in its results. In shear stress distribution, considering of length strain has no significant benefit, but in peeling stress this difference will improve the results significantly.

Keywords

Main Subjects

References

[1] Hart-Smith LJ (1986) Adhesively bonded joints for fibrous composite structures. International Symposium on joining and Repair of fibre-reinforced plastics, London, Imperial College.
[2] Goland M, Reissner E (1944) The stresses in cemented joints. J Appl Mech 11(1): 17-27.
[3] Oplinger DW (1994) Effects of adherend deflections in single lap joints. Int J Solids Struct 31(18): 2565-2587.
[4] Tsai MY, Oplinger DW, Morton J (1995) Improved theoretical solutions for adhesive lap joints. Int J Solids Struct 35(12): 1163-1185.
[5] Yang C, Pang S-S (1993) Stress-strain analysis of adhesive-bonded single-lap composite joints under cylindrical bending. Compos Eng 3(11): 1051-1063.
[6] Mortensen F, Thomsen O (2002) Analysis of adhesive bonded joints: a unified approach. Compos Sci Technol 62(7-8): 1011-1031.
[7] Delale F, Erdoghan F, Aydingolu M (1981) Stress in adhesive bonded joints. J Compos Mater 15: 249-271.
[8] Renton J, Vinson J (1975) The Efficient design of adhesive bonded joints. J Adhesion 7(3): 175-193.
[9] قارونی م‌ح، شیشه­ساز م (1393) بررسی تاثیر خواص مکانیکی بر توزیع تنش در اتصال چسبی تک­لبه تحت اثر گشتاور خمشی. بیست و دومین همایش سالانه بین­المللی مهندسی مکانیک ایران، اهواز، دانشگاه شهید چمران.
[10] احمدی­جو م، شیشه­ساز م (1393) بررسی توزیع تنش در یک اتصال تک لبه­ی کامپوزیتی بالانس نشده تحت کشش. بیست و دومین همایش سالانه بین­المللی مهندسی مکانیک ایران، اهواز، دانشگاه شهید چمران.
[11] عباس­زاده ح، شیشه­ساز م (1393) بررسی تاثیر برش عرضی در مقادیر تنش در یک اتصال چسبی تک­لبه تحت خمش. بیست و دومین همایش سالانه بین­المللی مهندسی مکانیک ایران، اهواز، دانشگاه شهید چمران.
[12] مطیع­قادر ح، لطفی ش، سید اسفهلان م (1389) مروری بر برخی از روش­های بهینه­سازی هوشمند. نشر دانشگاه آزاد اسلامی، شبستر.
Journal of Solid and Fluid Mechanics
Volume 6, Issue 4
January and February 2016
Pages 49-58

Files

Share

How to cite

Statistics