Thermal Response Analysis of Lock-in Thermography Test to Identify the Delamination in Composite Materials

Authors

Abstract

The delamination defects in the laminated composite structures are detected using the transient response analysis in the lock-in thermography test. The analysis procedure is implemented for the laminated composite plate subjected to harmonic heat flux in the top surface of the plate, in which the delamination defects with different sizes are located in different depths. The thermal wave propagation due to heat loading is simulated in the plate thickness along the healthy and defective regions and the amplitude and phase differences are determine in such regions. The phase difference of reflected waves is more sensitive to the defects than the amplitude of the waves. The results show that the phase difference between reflected waves from healthy and defective regions increases up to specific frequency value and the optimum frequency is determined using the present simulation. The results also show that the logarithmic phase difference depends linearly on the depth of delamination and such dependency can be used to determine the defect depth. The simulation results of lock-in thermography test are used to determine the optimum parameters required to detect the delamination in the laminated composite materials.

Keywords

Main Subjects


[1] Kevin T, Brien O (2009) Development of a composite delamination fatigue life prediction methodology. Durability, Damage Tolerance and Reliability Branch, NASA Langley Research Center, Hampton, Virginia, USA.
[2] Mabrouki F, Genest M, Shi G, Fahr A (2009) Numerical modeling for thermographic inspection of fiber metal laminates. NDT&E Int 42: 581-588.
[3] Junyan L, Liqiang L, Yang W (2013) Experimental study on active infrared thermography as a NDI tool for carbon–carbon composites. Compos Part B: Eng 45(1):138-147.
[4] Pickering S, Almond D (2008) Matched excitation energy comparison of the pulse and lock-in thermography NDE techniques. NDT & E Int 41(7): 501–509.
[5] Meola C, Carlomagno GM, Squillace A, Vitiello A  (2006) Non-destructive evaluation of aerospace materials with lock-in thermography. Eng Fail Anal 13(3): 380-388.
[6] WuD, ZweschperTh, Salerno A, Busse G (1998) Lock-in thermography for nondestructive evaluation of aerospace structures. NDT Net 3(9).
[7] Lahiri BB, Bagavathiappan S, ReshmiPR, Philip J, Jayakumar T, Raj B (2012) Quantification of defects in composites and rubber materials using active thermography. Infrared Phys&Techn 55(2-3):191-199.
[8] Vijayaraghavan GK, MajumderMC, Ramachandran KP (2010) Quantitative analysis of delaminations in grp pipes using thermal NDTE technique. J Adv ResMechEng 1.1.
[9] Chatterjee K, Tuli S, PickeringSG, Almond DP (2011) A comparison of the pulsed, lock-in and frequency modulated thermography nondestructive evaluation techniques. NDT&E Int 44: 655-667.
[10] Choi M, Kang K, Park J, Kim W, Kim K (2008) Quantitative determination of a subsurface defect of reference specimen by lock-in infrared thermography. NDT&E Int 41: 119-124.
[11] Zeng Z, Li C, Tao N, Feng L, Zhang C (2012) Depth prediction of non-air interface defect using pulsed thermography. NDT&E Int 48: 39-45.
[12] RaoS S (2005) The finite element method in engineering. 4th edn. Elsevier Pub.
[13] Castanedo CL (2005) Quantitative subsurface defect evaluation by pulsed phase thermography. PhD Thesis, University Laval Quebec.
[14] Wallbrink C, Wade SA, Jones R (2007) The effect of size on the quantitative estimation of defect depth in steel structures using lock-in thermography. J Appl Phys 101 (10): 104907-1-8.