Primary creep analysis of nanocomposite thick-walled sphere under thermal, magnetic and mechanical loading using viscoelastic Bergurs model

Authors

Abstract

In this study, stresses and strains history of nanocomposite thick walled sphere wich is made of Polyimide reinforced by SiO2 nanoparticles are investigated using the viscoelastic Bergurs model. Loading of sphere includes the thermal and magnetic uniform field under hydrostatic inner pressure. Constitutive model of the problem based on elasticity relationship is obtained. Solving this equation with respect to mechanical boundary conditions leads to stresses and strains at zero time so called thermo-elastic solution in which these stresses are used at beginning creep problem procedure. With differentiating of constitutive differential equation with respect of time and using relationship between Bergurs model and Prandtl–Reuss relations drives a new constitutive equation for creep. History of stresses and strains are provided by solving this equation using numerical strain rate method. Results show that maximum effective stress and creep strains occurs at inner surface. Also the primary creep stage occurs up to 1000 second with quick change of stresses and strains. After this stage the value of stresses and strains change with uniform speed.

Keywords

Main Subjects

References

[1]  Wilson D, Stenzenberger HD, Hergenrother PM (1990) Polyimides, Blackie, Glasgow.
[2]  Volksen W, Hergenrother PM (1994) High performance polymers. Springer, Berlin.
[3] Wang ZD, Lu JJ, Lib Y, Fu SY, Jiang SQ, Zhao XX (2005) Low temperature properties of PI/SiO2 nanocomposite films. Mat Sci Eng B-Solid 123: 216-221.
[4]  Chen XG, Guo JD, Zheng B, Li YQ, Fu ShY, He GH (2007) Investigation of thermal expansion of PI/SiO2 composite films by CCD imaging technique from 120 to 200 C. Compos Sci Technol 67: 3006-3013.
[5] Law M, Payten W, Snowden K (2002) Modeling creep of pressure vessels with thermal gradients using Theta projection data. Int J Pres Ves Pip 79: 847-851.
[6]  Ghorbanpour Arani A, kolahchi R, Mosallaie Barzoki AA, Loghman A (2012) Electro-thermo-mechanical behaviors of FGPM spheres using analytical method and ANSYS software. Appl Math Model 36: 139-157.
[7] Dai HL, Jiang HJ, Yang L (2012) Time-dependent behaviors of a FGPM hollow sphere under the coupling of multi-fields. Solid State Sci 14: 587-597.
[8] Loghman A, Moradi M (2013) The analysis of time-dependent creep in FGPM thick walled sphere under electro -magneto -thermo -mechanical loadings. Mech Time-Depend Mater 17(2): 215-239.
[9] Loghman A, Azami M (2015) A novel analytical-numerical solution for nonlinear time-dependent electro-thermo-mechanical creep behavior of rotating disk made of piezoelectric polymer. Appl Math Model, Accepted 7 December 2015. DOI: 10.1016/j.apm.2015.12.008
[10] Zamani Nejad M, Davoudi Kashkoli M (2014) Time-dependent thermo-creep analysis of rotating FGM thick-walled cylindrical pressure vessels under heat flux. Int J Eng Sci 82: 222-237.
[11] Davoudi Kashkoli M, Zamani Nejad M (2014) Effect of heat flux on creep stresses of thick-walled cylindrical pressure vessels. J Appl Res Technol 12(3): 585-597.
[12] Hosseini Kordkheili SA, Livani M (2013) Thermoelastic creep analysis of a functionally graded various thickness rotating disk with temperature-dependent material properties. Int J Pres Ves Pip 111: 63-74.
 [13] وکیلی تهامی ع، زهساز م، محمد علیزاده  فرد آ (1393)    طراحی  بهینه  چندهدفه  دیسک  دوار  با  ساختار  هدفمن آلومینیوم-سیلیکون کاربیدی با خواص وابسته به دما براساس رفتار خزشی. مجله مهندسی مکانیک مدرس 14(12):23-34.
[14] Ward IM, Sweeney J (2012) Mechanical properties of solid Polymers. Wiley, New York.
[15]  Jia Y, Peng K, Gong X, Zhang Z (2011) Creep and recovery of polypropylene/carbon nanotube composites. Int J Plasticity 27: 1239-1251.
[16] Wang ZD, Zhao XX (2008) Modeling and characterization of viscoelasticity of PI/SiO2 nanocomposite films under constant and fatigue loading. Mater Sci Eng A 486: 517-527.
[17]  Loghman A, Aleayoub SMA, Hasani Sadi M (2012) Time-dependent magnetothermoelastic creep modeling of FGM spheres using method of successive elastic solution. Appl Math Model 36(2): 836-845.
[18] Ghorbanpour Arani A, Haghparast E, Khoddami Maraghi Z, S Amir (2015) Static stress analysis of carbon nano-tube reinforced composite (CNTRC) cylinder under non-axisymmetric thermo-mechanical loads and uniform electro-magnetic fields. Composites B Eng 68: 136-145.
[19] Akbari Alashti R, Khorsand M, Tarahhomi MH (2013) Thermo-elastic analysis of a functionally graded spherical shell with piezoelectric layers by differential quadrature method. Scientia Iranica B 20: 109-119.
[20] You LH, Ou H, Zheng ZY (2007) Creep deformations and stresses in thick-walled cylindrical vessels of functionally graded materials subjected to internal pressure. Compos Struct 78: 285-291.
[21] Loghman A,Shokouhi N (2009) Creep damage evaluation of thick-walled spheres using a long-term creep constitutive model. J Mech Sci Technol 23: 2577-2582.
[22] Dolbow J, Gosez M (1996) Effect of out-of-plane properties of a polyimide film on the stress fields in microelectronic structures. Mech Mater 23: 311-321.
[23]  Saidi AR, Atashipour SR, Jomehzade E (2009) Exact elasticity solutions for thick-walled FG spherical pressure vessels with linearly and exponentially varying properties. Int J Eng (Trans A: Basics) 22(4): 405-416.
Journal of Solid and Fluid Mechanics
Volume 6, Issue 3
September and October 2016
Pages 163-174

Files

Share

How to cite

Statistics