2-D Aerodynamic Design of Turbojet Engine S-shaped Air Intake Considering the Engine Nose Effects

Abstract

Inverse design is one of the design methods of aerodynamic ducts such as S-duct intakes. In these problems, the duct geometry is unknown but the pressure distributions along the walls are given. In this paper, a new inverse design method called “flexible string method” is introduced. In this method, the duct walls are modified from initial guess to final shape based on the flexible string movement algorithm according to pressure distribution. At first, in order to practical design of a 2D jet engine S-shaped air intake according to flight Mach No. and required conditions in the jet engine intake, a preliminary duct is designed using an inverse design algorithm and an Euler flow solver (with no considering the jet engine nose effects). Design of the lips engine is the second step. At the third step, the effect of the jet nose is considered. Finally the design of S-shaped duct is analyzed with a viscous code to study the performance of the designed duct.

Keywords

References

[1] Ting CT, Kalosclimidt G, Syltebo BE (1975) Design and testing of new center inlet and S–duct for B–727 airplane with refanned JT8D engines. Report/Patent Number: AIAA PAPER: 75–59.
[2] Little BH, Trimboli WS (1982) An experimental investigation of S-duct diffusers for high-speed prop-fans. Report/Patent Number: AIAA 82–1123.
[3] McDill PL, Tolle LI (1983) Analytical design and experimental verification of S-duct diffusers for turboprop installations with an offset gearbox. Report/Patent Number: AIAA PAPER 83–1211.
[4] Vakili A, Wu JM, Liver P, Bhat MK (1983) Measurements of compressible secondary flow in a circular S-duct Report/Patent Number: AIAA PAPER 83–1739.
[5] Reichert BA, Wendt BJ (1993) An experimental investigation of S-duct flow controling arrays of low–profile vortex generators. Report/Patent Number: AIAA PAPER 93–18.
[‌6] Reichert BA, Wendt BJ (1994) Improving diffusing S-duct performance by secondary flow control. Report/Patent Number: AIAA PAPER 94–0365.
[7] Lee BJ, Kim C, Rho OH (2003) Aerodynamic optimization for the subsonic S-shaped diffuser using two-equation turbulence models. Report/Patent Number: AIAA PAPER 2003–3960.
[8] Weng PF, Guo RW (1994) On swirl control in an S-shaped air intake high angle of attack. Report/Patent Number: AIAA PAPER 94–366.
[9] Mayer DW, Anderson BH, Johnson TA (1998) 3D subsonic diffuser design and analysis. Report/Patent Number: AIAA PAPER 98–3418.
[10] Silva Lopes A, Piomelli U (2003) Large eddy simulation of the flow in an S-duct. Report/Patent Number: AIAA PAPER 2003–964.
[11] Pradeep AM, Sullerey RK (2004) Secondary flow control in a circular S-duct diffuser using vortex generator jets. Report/Patent Number: AIAA 2004–2615.
[12] Stanley R, Mohler Jr (2004) Wind-US flow calculations for the M2129 S-duct using structured and unstructured grids. Report/Patent Number: AIAA 2004–525.
[13] Jirasek A (2006) Design of vortex generator flow control in inlets. J Aircraft, 43(6).
[14] Kirk AM, Rediniotis OK, Cizmas PGA (2007) Numerical and experimental investigation of a serpentine inlet duct. Report/Patent Number: AIAA 2007–842.
[15] Abdellatif OE, Abd Rabbo M, Abd Elganny M, Shahin I (2008) Area ratio effect on the turbulent flow through a diffusing S-duct using large–eddy simulation. Report/Patent Number: AIAA 2008–5726.
[16] Zhang JM, Wang CF, Lum KY (2008) Multidisciplinary design of S-shaped intake. AIAA 2008–7060.
[17] Johnson BC, Webster RS, Sreenivas K (2010) A numerical investigation of S-duct flows with boundary layer ingestion Report/Patent Number: AIAA 2010–841.
[18] بیاتی مرتضی، فتحی مهدی ، بهمنی ناد علی ، غلامی علی (1386) طراحی و بهینه‌سازی آیرودینامیکی ورودی هوای موتور یک پهپاد جت.
[19] بهفرشاد قاسم، فرقانی فرزاد (1388) بررسی عددی فشار کل در یک مجرای ورودی هوای ورودی S-شکل در اعداد ماخ مختلف. هشتمین کنفرانس بین‌الملی هوافضای ایران.
[20] بهفرشاد قاسم، محلو سعید، کدیور امین (1388) بررسی اثرات نصب صفحات گرداب‌ساز و دمش لایه‌مرزی بر کارایی یک مجرای ورودی هوای خم‌دار. هشتمین کنفرانس بین‌الملی هوافضای ایران.
[21] Liou MS (2001) Ten years in the making AUSM–family. Report/Patent Number: AIAA 2001–2521.
[22] صمدی واقفی نوید (1388) طراحی بهینه مجاری آیرودینامیکی به کمک طراحی معکوس. پایان‌نامه کارشناسی‌ارشد، دانشگاه صنعتی شریف.
Journal of Solid and Fluid Mechanics
Volume 1, Issue 1 - Serial Number 1
September and October 2011
Pages 59-69

Files

Share

How to cite

Statistics