[1] Chintala V, Subramanian K (2013) A CFD (computational fluid dynamics) study for optimization of gas injector orientation for performance improvement of a dual-fuel diesel engine. J. Energy 57: 709-721.
[2] Sharma A, Murugan S (2016) Experimental evaluation of combustion parameters of a DI diesel engine operating with biodiesel blend at varying injection timings. Proc. First Int. Conf. on Recent Advances in Bioenergy Research. 169-177.
[3] Lata D, Misra A, Medhekar S (2012) Effect of hydrogen and LPG addition on the efficiency and emissions of a dual fuel diesel engine. Int J Hydrogen Energy 37(7): 6084-6096.
[4] Semin RAB (2008) A technical review of compressed natural gas as an alternative fuel for internal combustion engines. Am J Eng Appl Sci 1(4): 302-311.
[5] Mandal AA, Dalu R (2012) A Technical Review on Feasibility of CNG and Gasoline-Ethanol blends in SI engine. Int J Emerging Technol Adv Eng 2(12): 328-334.
[6] Teymoori MM, Chitsaz I, Zarei A (2023) Three-way catalyst modeling and fuel switch optimization of a natural gas bi-fuel-powered vehicle. Fuel 341: 126979.
[7]. Jaworski A, Kuszewski H, Balawender K, Woś P, Lew K, Jaremcio M (2024) Assessment of CH4 Emissions in a Compressed Natural Gas-Adapted Engine in the Context of Changes in the Equivalence Ratio. Energies: 17(9), 2095.
[8]. Shahid MI, Chen T, Farhan M, Rao A, Salam HA, Xiao Q, Li X (2025) Experimental study of emissions and conversion efficiency analysis of hydrogen-enriched compressed natural gas engine before and after catalytic converter and predicted by improved particle swarm optimization in conjunction with back propagation neural network (IMPSO-BPNN) Energy, 315:134409.
]9[ مستشارشهیدی سم، روحانی ع، خجسته پور م، زارعی ج (1399) مدل‌سازی و بهینه‌سازی پارامترهای عملکردی موتور دیزل دوگانه‌سوز تحت اثر تغییرات زمان پاشش و درصد اختلاط سوخت به کمک شبکه عصبی مصنوعی و الگوریتم ژنتیک چندهدفه، مکانیک سازه ها و شاره ها، (3)10: 75-61.
]10[ پوردربانی ر، موسوی ع (1402) تولید توان پایدار از موتور دیزل دوگانه سوز در حضور بیودیزل بیواتانول و بیوگاز: ارزیابی به کمک روش چرخه حیات. سوخت و احتراق، (2)16: 30-1.
]11[ اشعری س (1394) خودروهای گازسوز (CNG). چاپ سوم، صانعی شهمیرزادی، تهران.
[12] Khajepour A, Fallah MS, Goodarzi A (2014) Electric and hybrid vehicles: technologies, modeling and control-A mechatronic approach. John Wiley & Sons.
[13] Al-Arkawazi SAF (2019) Analyzing and predicting the relation between air–fuel ratio (AFR), lambda (l) and the exhaust emissions percentages and values of gasoline-fueled vehicles using versatile and portable emissions measurement system tool. SN Appl Sci 1(11): 1370.
[14] Karim G, Khan M (1968) Examination of effective rates of combustion heat release in a dual-fuel engine. J Mech Eng Sci 10(1): 13-23.
[15] Badr O, Karim G, Liu B (1999) An examination of the flame spread limits in a dual fuel engine. Appl Therm Eng 19(10): 1071-1080.
[16] Yusaf T, Yusoff MZ (2000) Development of a 3D CFD model to investigate the effect of the mixing quality on the CNG-diesel engine performance. Proc. Int. Conf. and Exh. and Natural Gas Vehicles: 1-14.
[17] Chang Y, Yaacob Z, Mohsin R (2007) Computational fluid dynamics simulation of injection mixer for CNG engines. Proc. World Congress on Engineering and Computer Science: 24-26.
[18] Abagnale C, Cameretti MC, De Simio L, Gambino M, Iannaccone S, Tuccillo R (2014) Combined numerical-experimental study of dual fuel diesel engine. Energy Procedia 45: 721-730.
[19] Prakash RP, Palani S, Kumar DV, Kumar SA, Shanmugam S (2017) Flow behaviour analysis of injection mixer for CNG engines using computational fluid dynamics. Int J Veh Struct Syst 9(5): 284-287.
[20] Gorjibandpy M, Kazemi Sangsereki M (2010) Computational investigation of air-gas venturi mixer for powered bi-fuel diesel engine. Int J Mech Mechatron Eng 4(11): 1197-1201.
[21] Sutar P (2010) CFD Optimization of venturi Mixer Design in Bi-fuel gas Engines. Inst Res J: 5-9.
[22] Danardono D, Kim K-S, Lee S-Y, Lee J-H (2011) Optimization the design of venturi gas mixer for syngas engine using three-dimensional CFD modeling. J Mech Sci Technol 25: 2285-2296.
[23] Bora BJ, Debnath BK, Gupta N, Saha UK, Sahoo N (2013) Investigation on the flow behaviour of a venturi type gas mixer designed for dual fuel diesel engines. Int J Emerging Technol Adv Eng 3(3): 202-209.
[24] Yusaf T, Baker P, Hamawand I, Noor M (2013) Effect of compressed natural gas mixing on the engine performance and emissions. Int J Automot Mech Eng 8(1): 1416-1429.
[25] Supee A, Shafeez M, Mohsin R, Majid Z (2014) Performance of diesel-compressed natural gas (CNG) dual fuel (DDF) engine via CNG-air venturi mixjector application. Arab J Sci Eng 39: 7335-7344.
[26] Abdul-Wahhab H, Aziz A, Al-Kayiem H, Nasif M (2015) Modeling of diesel/CNG mixing in a pre-injection chamber. IOP Conference Series: Materials Science and Engineering: 12-44.
[27] Abo-Serie E, Özgur M, Altinsik K (2015) Computational analysis of methane-air venturi mixer for optimum design. Proc. 13th Int. Combustion Symposium: 9-11.
[28] Chandekar AC, Debnath BK (2018) Computational investigation of air-biogas mixing device for different biogas substitutions and engine load variations. Renew Energy 127: 811-824.
[29] Das S, Kashyap D, Kalita P, Kulkarni V (2022) Computational investigation of a venturi-type mixer for gaseous fuel application in a dual-fuel engine. Int J Ambient Energy 43(1): 7666-7677.
[30] Ariani B, Felayati FM, Batutah M A (2024). Experimental Analysis of the Influence of a Compressed Natural Gas (CNG)-Air Mixer on Performance and Emissions in Partial Load CNG-Diesel Dual Fuel Engines. Automot Exp 7(2): 224-235.
[31] Batchelor GK (2000) An introduction to fluid dynamics. Cambridge university press.
[32] Hi YB, bin Mustafa A, bin Yaacob Z (2002) Computational Investigation of Air-Fuel Mixing System for Natural Gas Powered Motorcycle. 6th Asia-Pacific International Symposium on Combustion and Energy Utilization.
[33] Anil T, Ravi S, Shashikanth M, Tewari P, Rajan N (2006) CFD analysis of a mixture flow in a producer gas carburetor. Int. Conf. On Computational Fluid Dynamics, Acoustics, Heat Transfer and Electromagnetics.
[34] Reddy R, Reddy P (2014) Analysis of producer gas carburetor for different air-fuel ratios using CFD. Int J Res Eng Technol 3: 470-474.
[35] Sharma H, Singh S, Goel R (2014) CFD analysis of the natural gas based Carburetor for a two stroke spark Ignition engine. Int J Mech Eng Rob Res 1: 82-88.
[36] Launder B (1972) Lectures in mathematical models of turbulence. Academic Press.
[37] ANSYS Fluent (2013) Ansys Fluent Theory Guide. ANSYS Inc.
[38] Ramasamy D, Mahendran S, Kadirgama K, Noor M (2010) Design of compressed natural gas mixer using computational fluid dynamics. National Conf. in Mechanical Engineering Research and Postgraduate Students: 614-620.
[39] Bielaczyc P, Woodburn J, Szczotka A (2014) An assessment of regulated emissions and CO2 emissions from a European light-duty CNG-fueled vehicle in the context of Euro 6 emissions regulations. Appl Energy 117: 134-141.
[40] Kim J, Kim HY, Yoon S, Sa S (2008) Effect of intake valve swirl on fuel-gas mixing and subsequent combustion in a CAI engine. Int J Automot Technol 9: 649-657.
[41] Martínez-Martínez S, Leal-Garza RD, Sánchez-Cruz FA, Villarreal EB, Amado-Covarrubias M (2010) CFD analysis of the effect of the exhaust manifold design on the close-coupled catalytic converter performance. J KONES 17: 303-311.
)