Investigation of the effect of cavity insertion in brick on heat transfer through using computational fluid dynamic simulation

Authors

Department of Mechanical Engineering, Vali-e-Asr University of Rafsanajn, Rafsanjan, Iran

Abstract

In this study, heat loss through light weight concrete bricks as a function of the size and number of bricks’ cavities was examined via numerical simulation. To minimize the simplifications, conjugate convection and radiation heat transfer within the brick’s cavities filled with air was considered. Also, in the solid of the brick, conduction heat transfer was taken into account. To assess the orientation of the cavities in the brick, two geometrical constrains were employed in the design of the bricks leading to 22 different layouts for which there should be at least two cavities and at most nine enclosures inside a brick. Computational fluid dynamic approaches based on finite volume method were used for the simulations. 3D natural heat transfer with incompressible laminar flow was assumed in the cavities under steady state conditions. To analyze and compare the results in terms of thermal characteristics, the equivalent coefficient of conduction heat transfer was defined. Also, the results were presented with isotherms and velocity contours. Finally, the best configurations of air cavities in the view point of heat transfer were found. The results demonstrate that the configuration and size of the cavities have profound impact on the rate of heat transfer. Also, considering radiation heat transfer in the cavities is rather important.

Keywords

References

[1] Meyer B, Mitchell J, El-Wakil M (1982) The effect of thermal wall properties on natural convection in inclined rectangular cells. J Heat Trans-T ASME 104(1): 111-117.
[2]  Kim D, Viskanta R (1984) Study of the effects of wall conductance on natural convection in differently oriented square cavities. J Fluid Mech 144: 153-176.
[3]  Kim D, Viskanta R (1985) Effect of wall heat conduction on natural convection heat transfer in a square enclosure. J Heat Trans-T ASME 107(1): 139-146.
[4]  Akiyama M, Chong Q (1997) Numerical analysis of natural convection with surface radiation in a square enclosure. Numer Heat Tr A-Appl 32(4): 419-433.
[5]  Ramesh N, Venkateshan S (1999) Effect of surface radiation on natural convection in a square enclosure. J Thermophys Heat Tr 13(3): 299-301.
[6]  Lorente S, Petit M, Javelas R (1998) The effects of temperature conditions on the thermal resistance of walls made with different shapes vertical hollow bricks. Energ Buildings 28(3): 237-240.
[7]  Al-Hazmy M (2006) Analysis of coupled natural convection–conduction effects on the heat transport through hollow building blocks. Energ Buildings 38(5) 515-521.
[8]  Del Coz Díaz J (2007) Analysis and optimization of the heat-insulating light concrete hollow brick walls design by the finite element method. Appl Therm Eng 27(8-9): 1445-1456.
[9]  Antar M A (2010) Thermal radiation role in conjugate heat transfer across a multiple-cavity building block. Energy 35(8): 3508-3516.
[10] Sun J, Fang L (2009) Numerical simulation of concrete hollow bricks by the finite volume method. Int J Heat Mass Tran 52(23-24): 5598-5607.
[11] Del Coz Díaz J (2010) A FEM comparative analysis of the thermal efficiency among floors made up of clay, concrete and lightweight concrete hollow blocks. Appl Therm Eng 30(17-18): 2822-2826.
[12] Sambou V (2016) Modeling of the thermal performance of air-filled partitioned enclosures: Effects of the geometry and thermal properties. J Build Phys 39(4): 321-341.
[13] Boukendil M, Abdelbaki A, Zrikem Z (2017) Numerical simulation of coupled heat transfer through double hollow brick walls: Effects of mortar joint thickness and emissivity. Appl Therm Eng 125: 1228-1238.
[14] Huang J, Yu J, Yang H (2018) Effects of key factors on the heat insulation performance of a hollow block ventilated wall. Appl Energ 232: 409-423.
[15] Zhang T, Yang H (2019) Heat transfer pattern judgment and thermal performance enhancement of insulation air layers in building envelopes. Appl Energ 250: 834-845.
[16] Kanellopoulos G (2017) Numerical Analysis and Modelling of Heat Transfer Processes through Perforated Clay Brick Masonry Walls. Procedia Environ Sci 38: 492-499.
[17] Khanafer K, Vafai K, Lightstone M (2003) Buoyancy-driven heat transfer enhancement in a two-dimensional enclosure utilizing nanofluids. Int J Heat Mass Tran 46(19): 3639-3653.
[18] Markatos NC, Pericleous K (1984) Laminar and turbulent natural convection in an enclosed cavity. Int J Heat Mass Tran 27(5): 755-772.
[19] De Vahl Davis G (1983) Natural convection of air in a square cavity: a bench mark numerical solution. Int J Numer Meth Fl 3(3): 249-264.
[20] Bejan A (2013) Convection heat transfer. John Wiley & Sons.
[21] Bejan A, Al-Homoud AA, Imberger J (1981) Experimental study of high-Rayleigh-number convection in a horizontal cavity with different end temperatures. J Fluid Mech 109: 283-299.
[22] Kim SK, Kim SY, Choi YD (2002) Resonance of natural convection in a side heated enclosure with a mechanically oscillating bottom wall. Int J Heat Mass Tran 45(15): 3155-3162.
Journal of Solid and Fluid Mechanics
Volume 10, Issue 2
June 2020
Pages 267-283

Files

Share

How to cite

Statistics