Determination of Stability Regions of Wheel and Workpiece in Plunge Grinding Process Using a 3-D Workpiece Model

Authors

MSc student, Mech. Eng., Yazd Univ., Yazd, Iran.

Abstract

The chatter phenomenon is a kind of unstable self-excited vibration which occurs in most machining processes including grinding. A 3-D nonlinear model of chatter vibrations in grinding process has been presented in this paper. The workpiece has been modeled as a continuous rotating shaft with transverse vibrations and wheel is regarded as a one degree of freedom damped spring–mass system. The equations of motion have been dimensionless by π-Buckingham theory. Then using assumed modes method, partial differential equations of workpiece changed to ordinary differential equations and then the method of multiple scales is adopted for the approximate solution. Stability regions for workpiece and wheel in various workpiece rotary speeds and various wheel positions drawed and then the effect of various parameters such as rotational speed of the wheel,and the radius of the workpiece have been investigated. Results showed that vibrations in workpiece and in wheel are quite different from each other. When grinding occurs in the middle of the workpiece the possibility of chatter phenomenon is more, while the position of wheel has no effect on the vibration of the wheel.

Keywords

Main Subjects

References

[1] Chatterjee S (2011) Self-excited oscillation under nonlinear feedback with time-delay. J Sound Vib330: 1860-1876.
[2] Brecher C, Esser M, Witt S (2009) Interaction of manufacturing process and machine tool. CIRP Ann-Manuf Techn 58: 588-607.
[3] Tobias SA, Fishwick W (1958) The chatter of  lathe tools under orthogonal cutting conditions. T ASME80: 1079-1088.
[4] Tlusty J, Polacek M (1963) The stability of machine tools against self excited vibrations in machining.Proc. Int. Research in Production Eng Conf. Pittsburgh, PA.:465–474.
[5]  S. A. Tobias (1965) Machine Tool Vibration. Blackie, London.
[6] Deshpande N, Fofana MS (2001) Nonlinear regenerative chatter in turning. J Comp Integ Manu17: 107-112.
[7] Jalili MM, Tavari H (2014) Nonlinear analysis of chatter in turning process considering workpiece and cutting tool dynamics simultaneously. Modares Mech Eng13: 177-188. 
[8] Jalili MM, Tavari H, Movahhedy MR (2015) Nonlinear analysis of chatter in turning process using dimensionless groups. J Brazil Soc Mech Sci Eng37: 1151-1162.
[9] Thompson RA (1974) On the doubly regenerative stability of a grinder. J Eng Ind-T ASME96: 275-280.
[10] Thompson RA (1977) On the doubly regenerative stability of a grinder: the combined effect of wheel and workpiece speed. J Eng Ind-T ASME 99: 237-241.
[11] Thompson RA (1992) On the doubly regenerative stability of a grinder: the effect of contact stiffness and wave filtering. J Eng Ind-T ASME114: 53-60.
[12] Li HQ, Shin YC (2006) A time-domain dynamic model for chatter prediction of cylindrical plunge grinding processes. J Manuf Sci E-T ASME 128: 404-415.
[13] Shimizu T, Inasaki I, Yonetsu S (1978) Regenerative chatter during cylindrical traverse grinding. Bull JSME21: 317-323.
[14] Fu JC, Troy CA, Morit K (1996) Chatter classification by entropy functions and morphological processing in cylindrical traverse grinding. Precis Eng18: 110-117.
[15]  Weck M, Hennes N, Schulz A (2001) Dynamic behaviour of cylindrical traverse grinding processes. CIRP Ann-Manuf Techn 50: 213-216.
[16]  Yuan L, Keskinen E, Jarvenpaa VM (2005) Stability analysis of roll grinding system with double time delay effects. Proc. IUTAM Symposium on Vibration Control of Nonlinear Mechanisms and Structures130: 375-387.
[17] Liu ZH, Payre G (2007) Stability analysis of doubly regenerative cylindrical grinding process. J Sound Vib301: 950-962.
[18] Chung KW, Liu Z (2011) Nonlinear analysis of chatter vibration in a cylindrical transverse grinding process with two time delays using a nonlinear time transformation method. Nonlinear Dyn66: 441-456.
[19]  Kim P, Jung J, Lee S, Seok J (2013) Stability and bifurcation analyses of chatter vibrations in a nonlinear cylindrical traverse grinding process. J Sound Vib332: 23879-3896.
[20] Shiau TN, Huang KH, Wang FC, KH Chen, Kuo CP (2010) Dynamic response of a rotating ball screw subject to a moving regenerative force in grinding. Appl Math Model 34: 1721-1731.
[21] Yan Y, Xu J, Wiercigroch M (2014) Chatter in a transverse grinding process. J Sound Vib333: 937-953.
[22] Yan Y, Xu J,  Wiercigroch M (2015) Non-linear analysis and quench control of chatter in plunge grinding. Int J Non-Linear Mech70: 134-144.
[23] Hodges DH, Dowell EH (1974) Nonlinear Equations of Motion for the Elastic Bending and Torsion of Twisted Nonuniform Rotor Blades. NASA technical note: 1-30.
[24]  Werner G (1978) Influence of work material on grinding forces. CIRP Ann-Manuf Techn 27: 243-248.
[25] WB Rowe (2009) Principles of Modern Grinding Technology. William Andrew, USA.
[26] Nayfeh AH, Mook DT (1979) Nonlinear Oscillations. Wiley-Interscience, New York.
Journal of Solid and Fluid Mechanics
Volume 7, Issue 3
September and October 2017
Pages 67-82

Files

Share

How to cite

Statistics