Development of the Conceptual Design Algorithm for Tactical Aerostat

Authors

1 Iranian Space Research Center

2 Assistant Professor, Iranian Space Research Center

3 Iranian Space Research center

Abstract

In this paper, an algorithm for the conceptual design of the aerostat is developed. This tactical aerostat is an intermediate step for stratospheric high altitude platforms. In the presented algorithm, the design and operational parameters of the aerostat such as geometry and dimension of the aerostat hull, shape and configuration of the tails, the mass budget of the balloon components, ballonet percentage, fabrics materials, stress of hull fabric, tether tension at the winch, static margin, angle of attack, blow by, tether length, tether profile, the confluence point position, etc. are determined via 4 distinguished loops. In addition, an aerostat is designed for the special given requirements using this algorithm, and the results are prepared in the paper. Furthermore, to optimize the tail sizing, the Taguchi orthogonal array L16 (45) is used. 16 different tails are designed and the static stability of the aerostat is analyzed using these tails and the final optimum geometry of the tail is introduced. Finally, the influence of the wind velocity, payload mass, payload position, and the operational height above mean sea level on the operational parameters of the aerostat are explored.

Keywords

Main Subjects


[1] d’Oliveira, Melo FA, Devezas F, et al. (2016) High altitude platforms-Present situation and technology trends. J. Aerosp. Technol. Manag 8: 249-262.
[2] Dovis F, Presti L L, Magli E, et al. (2001) Stratospheric platforms: a novel technological support for Earth observation and remote sensing applications, Sensors, Systems, and Next-Generation Satellites V.
[3] Pant R S and Kapoor A (2013) A methodology for conceptual sizing of a tethered aerostat, AIAA Lighter-Than-Air Systems Technology (LTA) Conference.
[4] Sharma N, Sehgal R, Pant R S, et al. (2014) Design fabrication and deployment of a tethered aerostat system for aerial surveillance, National Level Conference on Advances in Aerial/Road Vehicle and its Application, MIT, Manipal.
[5] Bilaye P, Gawande V, Desai U, et al. (2008) Low cost wireless internet access for rural areas using tethered aerostats, 2008 IEEE Region 10 and the Third international Conference on Industrial and Information Systems.
[6] Dusane C R, Wani A V, Pant R S, et al. (2017) An elevated balloon-kite hybrid platform for surveillance, 23rd AIAA Lighter-Than-Air Systems Technology Conference.
[7] Grant E C and Leland M (2013) Fundamentals of Aircraft and Airship Design. AIAA education series.
[8] Khoury G A (2012) Airship technology: Cambridge university press.
[9] Singha K (2012) A review on coating & lamination in textiles: processes and applications. American J. Polym. Sci. 2: 39-49.
[10] Zhai H and Euler A (2005) Material challenges for lighter-than-air systems in high altitude applications, AIAA 5th ATIO and16th Lighter-Than-Air Sys Tech. and Balloon Systems Conferences.
[11] JONES S (1985) Aerodynamics of a new aerostat design with inverted-y fins, 6th Lighter-Than-Air Systems Conference.
[12] Sasidharan A, Velamati R K, Janardhanan S, et al. (2022) Stability Derivatives of Various Lighter-than-Air Vehicles: A CFD-Based Comparative Study. Drones 6: 168.
[13] Chan S C, Hunt J D and Shervington K (2013) Wind tunnel study of a large aerostat, CFD validation, AIAA lighter-than-air systems technology (LTA) conference.
[14] Joubert G and Le Roy J-F (2017) Open-Source CFD Code Assessment For Lighter-Than-Air Aerodynamic Flows Simulations, 52nd 3AF International Conference on Applied Aerodynamics.
[15] Voloshin V, Chen Y K and Calay R K (2012) A comparison of turbulence models in airship steady-state CFD simulations. arXiv preprint arXiv:1210.2970.
]16[جعفریان, سرخیل و حقیقت (2022) شبیه‌سازی آیرودینامیکی هواایست تاکتیکی و استخراج ضرایب استاتیکی طولی. علوم، فناوری و کاربردهای فضایی.
[17] Myers P F and Vorachek J J (1971) Definition of Tethered Balloon Systems. Goodyear Aerospace Corp Akron Oh.
 
[18] Bajoria A, Mahto N K, Boppana C K, et al. (2017) Design of a tethered aerostat system for animal and bird hazard mitigation, 2017 First International Conference on Recent Advances in Aerospace Engineering (ICRAAE).
[19] Bagare S V, Joshi A and Pant R S (2021) A Methodology for Sizing of a Mini-Aerostat System, AIAA AVIATION 2021 FORUM.
[20] Agency E U A S (2020) European Union Aviation Safety Agency, CS-31TGB.
[21] Lambert C and Nahon M (2003) Stability analysis of a tethered aerostat. J. Aircr. 40: 705-715.
[22] Yang K and Basem E-H (2008) Design for Six Sigma: Taguchi's Orthogonal Array Experiment: McGraw Hill Professional.