Active vibration control of rotating FGM conical shell via piezoelectric patches

Authors

1 Professor of KNT University

2 Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan

3 Department of Solid Mechanics Faculty of Mechanical Engineering University of K. N. Toosi

Abstract

In this paper, control of forced vibration amplitude of a rotating FGM conical shell is studied using FGPM patches. Four piezoelectric patches are placed inner and outer of the shell. In order to obtain the system dynamic equations, the energy method and the classical plate theory are used and simply supported boundary conditions are considered. Each system variable is considered as an expression by separation of variables with variable-time coefficients. Subsequently by substitution the considered responses in the energy functions and finally using the Lagrange equation, the governing equations of the system are obtained. Natural frequencies are compared with the result of previous researches in the case of non-rotating and rotating shell. Also to control vibration, velocity feedback is used so that sensor voltage, which is dependent on the surface, thickness, and location of each sensor, is calculated and used in the actuator voltage. In the following section, control of the system is done for first mode and then convergent system, which in both cases, Closed-loop system well dampens amplitude of forced vibrations.

Keywords


[1] Lam KY, Hua L (1997) Vibration analysis of a rotating truncated circular conical shell. Int J Solids Struct 34: 2183-2197.
[2] Karroubi R, Irani-Rahaghi M (2019) Rotating sandwich cylindrical shells with an FGM core and two FGPM layers: free vibration analysis. Appl Math Mech-Engl 40: 563-578.
[3] Li FM, Song ZG, Chen ZB (2012) Active vibration control of conical shells using piezoelectric materials. J Vib Control 18: 2234-2256.
[4] Jafari AA, Khalili SMR, Tavakolian M (2014) Nonlinear vibration of functionally graded cylindrical shells embedded with a piezoelectric layer. Thin-Walled Struct 79: 8-15.
[5] Arefi M (2019) Third-order electro-elastic analysis of sandwich doubly curved piezoelectric micro shells. Mech based des Struc 1-30.
[6] Song ZG, Zhang LW, Liew KM (2016) Active vibration control of CNT-reinforced composite cylindrical shells via piezoelectric patches. Compos Struct 158: 92-100.
[7] Wang J, Cao Y, Lin G (2016) Vibration analysis    of high-speed rotating conical shell with      arbitrary boundary conditions. Proc Meet Acoust 29: 065001
[8] Moghaddam SMF, Ahmadi H (2020) Active vibration control of truncated conical shell under harmonic excitation using piezoelectric actuator. Thin-Walled Struct 151: 106642.
[9] Li H, Lam KY, Ng TY (2005) Rotating shell dynamics. Elsevier.
[10] جعفری نیاسر م، جعفری ع ع، ایرانی رهقی م (1398) بررسی تاثیر وصله‌های پیزوالکتریک بر روی فرکانس ارتعاشات روتور پوسته‌ی مخروطی ساخته شده از      مواد مدرج تابعی. کنفرانس بین المللی آکوستیک و ارتعاشات.
[11] عطاریان م، جعفری ع ع (1389) بررسی ارتعاشات آزاد مخزن استوانه‌ای حاوی سیال با پوسته .FGM پایان نامه کارشناسی ارشد، دانشگاه خواجه نصیرالدین طوسی.
[12] Arefi M (2015) The effect of different functionalities of FGM and FGPM layers on free vibration analysis of the FG circular plates integrated with piezoelectric layers. Smart Struct Syst 15:1345-1362.
[13] Arefi M, Karroubi R, Irani-Rahaghi M (2016) Free vibration analysis of functionally graded laminated sandwich cylindrical shells integrated with piezoelectric layer. Appl Math Mech-Engl 37: 821-834.
[14] Sun S, Liu L, Cao D (2018) Nonlinear travelling wave vibrations of a rotating thin cylindrical shell. J Sound Vib 431: 122-136.
[15] Han Q, Chu F (2014) Parametric resonance of truncated conical shells rotating at periodically varying angular speed. J Sound Vib 333: 2866-2884.
[16] Mehralian F, Beni YT (2018) Vibration  analysis of size-dependent bimorph functionally graded piezoelectric cylindrical shell based on nonlocal strain gradient theory. J Braz Soc Mech Sci 40: 27.