Selection of the optimal perforated structure in the axial loading of aluminum thin-walled tubes using multi-criteria decision-making: COPRAS method

Authors

1 Mechanical Engineering Department, Sirjan University of Technology, Sirjan, Iran

2 Associate Professor, Mechanical Engineering Department, Babol Noshirvani University of Technology, Babol, Iran

3 Assistant Professor, Mechanical Engineering Department, Sirjan University of Technology, Sirjan, Iran

10.22044/jsfm.2024.13968.3819

Abstract

The use of perforated designs in the manufacturing of thin-walled cylindrical metallic tubes is very common as a suitable option for absorbing energy. In this research, six different geometric designs have been presented to investigate the energy absorption capability of cylindrical thin-walled AA6061 tubes. The COPPRAS multi-criteria decision-making method has been used to select the best geometric design. Initial peak force (IPF), total absorbed energy (E_t), and the specific energy absorption (SEA) of the tubes were considered as selection criteria of the best alternative. The obtained results showed that the perforated tube with unequal circular holes arranged one in the middle is the best option for absorbing energy with simultaneously considering all the criteria. In this optimal geometrical pattern, the arrangement of circular holes is one in the middle with 3 rows of holes, 8 holes in each row, a diameter of the small hole of 5 mm and a diameter of the large hole of 6 mm. In this tube, the IPF, E_t, and SEA values were obtained as 32.04 kN, 1.20 kJ, and 20.88 kJ/kg, respectively.

Keywords

Main Subjects


[1] Elyasi M, Rooholamini Ahangar M, Modanloo V (2023) Improving Energy Absorption of AA6061 Holed Thin-Walled Cylindrical Tubes. Modares Mech Eng 23(11):587-595.
[2] Ghanbari-Ghazijahani T, Nabati A, Azandariani M G, Fanaie N (2020) Crushing of steel tubes with different infills under partial axial loading. Thin-Walled Struc 149:106614.
[3] Moradpour A, Elyasi M, Montazeri S (2016) Developing a new thin-walled tube structure and analyzing its crushing performance for aa 60601 and mild steel under axial loading. Trans Indian Inst Metals 69:1107-1117.
[4] Elyasi M, Moradpour A, Montazeri S (2014) Axial crushing in a novel technique of thin-walled tube. Key Eng Mat 622:709-716.
[5] Shen W, Gu X, Jiang P, Hu J, Lv X, Qian L (2017) Crushing analysis and multiobjective optimization design for rectangular unequal triple-cell tubes subjected to axial loading. Thin-Walled Struc 117:190-198.
[6] Elyasi M, Montazeri S, Moradpour A (2015) Investigating the effect of material type in the new design of thin-walled tubes under axial loading. Adv in Mat and Proc Tech 1(3-4):375-383.
[7] Mohsenizadeh S, Ahmad Z (2019) Auxeticity effect on crushing characteristics of auxetic foam-filled square tubes under axial loading. Thin-Walled Struc 145:106379.
[8] Rahi A (2018) Controlling energy absorption capacity of combined bitubular tubes under axial loading. Thin-Walled Struc 123:222-231.
[9] Pirmohammad S, Esmaeili-Marzdashti S (2019) Multi-objective crashworthiness optimization of square and octagonal bitubal structures including different hole shapes. Thin-Walled Struc 139:126-138.
[10] Song J, Chen Y, Lu G (2013) Light-weight thin-walled structures with patterned windows under axial crushing. Int J Mech Sci 66:239-248.
[11] Nikkhah H, Baroutaji A, Olabi AG (2019) Crashworthiness design and optimisation of windowed tubes under axial impact loading. Thin-Walled Struc 142:132-148.
[12] Mohamed Ismail N M (2023) Performance analysis and optimization of square tubes with different shapes, sizes, and patterns of holes under axial compression loading. Int J Crash 1-27.
[13] Modanloo V, Alimirzaloo V, Elyasi M (2019) Multi-objective optimization of the stamping of titanium bipolar plates for fuel cell. ADMT J 12(4):1-8.
[14] Modanloo V (2023) Application of multi-criteria decision making method for selection of lightweight material in manufacturing of railway vehicles. J. Sol. Flu. Mech. 13(3):45-53.
[15] Moradian M, Modanloo V, Aghaiee S (2019) Comparative analysis of multi criteria decision making techniques for material selection of brake booster valve body. J Traff Transp Eng (English Edition) 6(5):526-534.
[16] Fan D, Qihua M, Xuehui G, Tianjun Z (2021) Crashworthiness analysis of perforated metal/composite thin-walled structures under axial and oblique loading. Poly Comp 42(4):2019-2036.
[17] Modanloo V, Elyasi M, Talebi Ghadikolaee H, Ahmadi Khatir F, Akhoundi B (2023) The use of MCDM techniques to assess fluid pressure on the bending quality of AA6063 heat-treated tubes. J Eng Res.
[18] Montazeri S, Elyasi M, Moradpour A (2018) Investigating the energy absorption, sea and crushing performance of holed and grooved thin-walled tubes under axial loading with different materials. Thin-Walled Struc 131:646-653.