Author Index

A

  • Abbasi, Sarallah Numerical simulation of flow around an immersed cylinder in turbulence generated by a network of upstream cylinders. [Volume 15, Issue 4, 2025, Pages 281-296]
  • Abbasi, Yosef Non-linear Modeling and Design of Control System for an Aero Gas Turbine Engine Using NARMA L-2 Neural Network [Volume 15, Issue 4, 2025, Pages 297-309]
  • Abdollahi, A. Reduction of detrimental torsion in ionic polymer-metal composite actuators through coupled electrochemical-mechanical simulation [Volume 15, Issue 6, 2026, Pages 491-507]
  • Aghadavoodi, Mohammad Matin Numerical simulation of flow around an immersed cylinder in turbulence generated by a network of upstream cylinders. [Volume 15, Issue 4, 2025, Pages 281-296]
  • Ahmadi, Alireza Comparative Analysis of Electro aerodynamic Propulsion and Electric Motors for the Zephyr 8 UAV [Volume 15, Issue 1, 2025, Pages 19-31]
  • Ahmadi, Mostafa Numerical investigation of magnetohydrodynamic forced convection of phase change materials using the lattice Boltzmann method [Volume 15, Issue 6, 2026, Pages 545-565]
  • Ahmadian, Hamid Investigating the effect of gyroscope on transverse vibrations and stability of milling tools with Euler-Bernoulli beam model [Volume 15, Issue 1, 2025, Pages 65-81]
  • Alfi, Alireza Synchronization of Uncertain Multiple Chaotic Systems Based on an Optimal Nonlinear Observer: A Secure Communication Approach [Volume 15, Issue 2, 2025, Pages 17-32]
  • Alibigieghd, Alireza Effect of Geometric and Thermophysical Properties of Porous Medium on Thermal Performance of a Finned Microchannel Heat Sink [Volume 15, Issue 5, 2025, Pages 443-456]
  • Alinia-ziazi, Ali Experimental and Numerical Investigation of the Effect of Blast Loading on Sandwich Structures with Metallic Lattice Cores [Volume 15, Issue 5, 2025]
  • Amadeh, Mahdi Computational study of Supercritical Forced Oscillations in a Mixed-Compression Air Inlet at Mach Number of 2 [Volume 15, Issue 1, 2025, Pages 51-64]
  • Ansarian, Hossein A Computational Analysis of the Aerodynamic Behaviors of the Low-Speed Conventional Airfoils [Volume 15, Issue 3, 2025, Pages 215-221]
  • Ansarian, Hossein Investigating the Effectiveness of Turbulence Models in Numerical Simulation of Rocket Exhaust Plume [Volume 15, Issue 4, 2025, Pages 267-279]
  • Ariaey, Ali REza Effect of Travel Speed on CK45 Steel Welding: A Comprehensive Analysis of Mechanical Properties, Corrosion Behavior, Energy Input, and Processing Time [Volume 15, Issue 5, 2025, Pages 411-425]
  • Asadi, Ali Numerical investigation of different combustion chamber geometries and injection angles in a direct injection diesel engine [Volume 15, Issue 2, 2025, Pages 95-110]
  • Asadi, Ali Effect of Oxygen Enriched Air Combined With EGR on Performance Parameters and Diesel Engine Emissions [Volume 15, Issue 5, 2025, Pages 427-442]
  • Ashory, Mohammad Reza Numerical and Experimental study of a vibro- impact bistable piezoelectric cantilever beam energy harvester [Volume 15, Issue 3, 2025, Pages 199-213]
  • Atashgar, Karim A Adaptable Fault Detection Method in Engineering Systems Using Machine Learning [Volume 15, Issue 2, 2025, Pages 33-50]
  • Ayubi Rad, Moslem Effect of Oxygen Enriched Air Combined With EGR on Performance Parameters and Diesel Engine Emissions [Volume 15, Issue 5, 2025, Pages 427-442]
  • Azhdari, Ali Synchronization of Uncertain Multiple Chaotic Systems Based on an Optimal Nonlinear Observer: A Secure Communication Approach [Volume 15, Issue 2, 2025, Pages 17-32]

B

  • Babaei, Hashem Experimental and Numerical Investigation of the Effect of Blast Loading on Sandwich Structures with Metallic Lattice Cores [Volume 15, Issue 5, 2025]
  • Bahman-Jahromi, Iman Numerical Investigation of Grazing Flow on a Micro Perforated Plate Liner [Volume 15, Issue 3, 2025, Pages 231-239]
  • Balaghi Inaloo, Mohammad The Effect of Forming Diameter and Rotational Speed on Characterization of Formed Tubes by Spinning Process [Volume 15, Issue 5, 2025, Pages 367-376]
  • Bodaghi, Amin The effect of the presence of nanoclay and basalt fibers on the tensile and impact mechanical properties of PLA/NR polymer composites using the response surface method (RSM) [Volume 15, Issue 5, 2025, Pages 349-365]

C

  • Choopani, Yahya Polishing of artificial femoral head with coarse sisal fiber-based tool [Volume 15, Issue 6, 2026, Pages 509-519]

D

  • Davari, Alireza A Computational Analysis of the Aerodynamic Behaviors of the Low-Speed Conventional Airfoils [Volume 15, Issue 3, 2025, Pages 215-221]
  • Davoodabadi Farahani, Somayeh Effect of Geometric and Thermophysical Properties of Porous Medium on Thermal Performance of a Finned Microchannel Heat Sink [Volume 15, Issue 5, 2025, Pages 443-456]
  • Delvari Ahmadpoor, Amirhossein Design and analysis of a 1 kW Darrieus vertical axis wind turbine with straight composite blades [Volume 15, Issue 1, 2025, Pages 1-17]
  • Deriszadeh, Reza Numerical and statistical study of cylindrical heat sink performance with interrupted minichannels and twisted vortex generator [Volume 15, Issue 2, 2025, Pages 153-164]

E

  • Eshraghi, Hamzeh Experimental study of the sweep-back angle on the aerodynamic performance of a flapping flexible wing [Volume 15, Issue 6, 2026, Pages 535-544]
  • Eskini, Aryan Computational Study of the Effect of Torsional Loading on the Behavior of Nitinol Stents in the Femoropopliteal Artery [Volume 15, Issue 5, 2025, Pages 377-394]
  • Eskini, Bahram Computational Study of the Effect of Torsional Loading on the Behavior of Nitinol Stents in the Femoropopliteal Artery [Volume 15, Issue 5, 2025, Pages 377-394]
  • Etemadi haghighi, Shahram Experimental and Numerical Investigation of the Effect of Blast Loading on Sandwich Structures with Metallic Lattice Cores [Volume 15, Issue 5, 2025]

F

  • Fahimi Rad, Afshin Numerical investigation of different combustion chamber geometries and injection angles in a direct injection diesel engine [Volume 15, Issue 2, 2025, Pages 95-110]
  • Falahat, Alireza Numerical and statistical study of cylindrical heat sink performance with interrupted minichannels and twisted vortex generator [Volume 15, Issue 2, 2025, Pages 153-164]

G

  • Gheidar-kheljani, Jafar A Adaptable Fault Detection Method in Engineering Systems Using Machine Learning [Volume 15, Issue 2, 2025, Pages 33-50]
  • Ghorbani, Mohammad Simulation and analysis of chatter onset in orthogonal cutting process using an energy-based approach [Volume 15, Issue 5, 2025, Pages 331-347]
  • Goshayeshi, Hamidreza Numerical investigation of magnetohydrodynamic forced convection of phase change materials using the lattice Boltzmann method [Volume 15, Issue 6, 2026, Pages 545-565]

H

  • Hadidoolabi, Mostafa Investigating the Effectiveness of Turbulence Models in Numerical Simulation of Rocket Exhaust Plume [Volume 15, Issue 4, 2025, Pages 267-279]
  • Hajian, Ramin Thermal Design of Midrex Direct Reduction Plant Recuperator [Volume 15, Issue 1, 2025, Pages 33-49]
  • Hami, Masoud Numerical investigation of the effect of opposing gas flow directions in adjacent cells on power generation and temperature distribution in a polymer electrolyte membrane fuel cell [Volume 15, Issue 4, 2025, Pages 311-330]
  • Hosseini, Seyedamin Numerical Investigation of the Effect of Height Ratio, Collector Angle, and Obstacle Presence in a Solar Chimney with a Two-Level Inlet [Volume 15, Issue 5, 2025, Pages 457-474]

J

  • Jafarpour, Masoud Effect of Travel Speed on CK45 Steel Welding: A Comprehensive Analysis of Mechanical Properties, Corrosion Behavior, Energy Input, and Processing Time [Volume 15, Issue 5, 2025, Pages 411-425]
  • Jahromi, Mehdi Non-linear Modeling and Design of Control System for an Aero Gas Turbine Engine Using NARMA L-2 Neural Network [Volume 15, Issue 4, 2025, Pages 297-309]
  • Jalili, Mohammad Mehdi Investigation of the Effects of Geometric and Structural Parameters of Carbon Nanotubes on Sound Absorption in an Argon Gas Environment Using a Molecular Dynamics Simulation Approach [Volume 15, Issue 6, 2026, Pages 475-489]
  • Jalili, Payam Numerical investigation of the effect of the shape of the cooling chamber containing paraffin phase change material on the performance of solar panels [Volume 15, Issue 1, 2025, Pages 105-116]
  • Javadi, Masoud Numerical investigation of radar reflection reduction of quadratic surfaces and conical sections made of aluminum in the X-band frequency range: A study based on electromagnetic permittivity and permeability [Volume 15, Issue 2, 2025, Pages 65-80]

K

  • Kalantar, Vali Analysis of molybdenite powder reaction rate and temperature effect on reaction time [Volume 15, Issue 1, 2025, Pages 83-91]
  • Kamalvand, Mohammad Investigation of the Effects of Geometric and Structural Parameters of Carbon Nanotubes on Sound Absorption in an Argon Gas Environment Using a Molecular Dynamics Simulation Approach [Volume 15, Issue 6, 2026, Pages 475-489]
  • Karimi, Farzad Thermal Design of Midrex Direct Reduction Plant Recuperator [Volume 15, Issue 1, 2025, Pages 33-49]
  • Keighobadi, Javad Synchronization of Uncertain Multiple Chaotic Systems Based on an Optimal Nonlinear Observer: A Secure Communication Approach [Volume 15, Issue 2, 2025, Pages 17-32]
  • Khadem, Javad Numerical investigation of different combustion chamber geometries and injection angles in a direct injection diesel engine [Volume 15, Issue 2, 2025, Pages 95-110]
  • Khadem, Javad Effect of Oxygen Enriched Air Combined With EGR on Performance Parameters and Diesel Engine Emissions [Volume 15, Issue 5, 2025, Pages 427-442]
  • Khajehahmad Attari, Nader Investigation of the buckling behavior of cylindrical unanchored steel storage tank under near field 3-D seismic loading [Volume 15, Issue 3, 2025, Pages 183-198]
  • Khajehzadeh, Mohsen Polishing of artificial femoral head with coarse sisal fiber-based tool [Volume 15, Issue 6, 2026, Pages 509-519]
  • Khakbaz, Mohammad Numerical investigation of radar reflection reduction of quadratic surfaces and conical sections made of aluminum in the X-band frequency range: A study based on electromagnetic permittivity and permeability [Volume 15, Issue 2, 2025, Pages 65-80]
  • Khalkhali, Abolfazl Multi-objective optimization of L6e electric vehicle class body structure using the MOPSO method [Volume 15, Issue 4, 2025, Pages 241-252]
  • Khatibi, Mohammad Mahdi Numerical and Experimental study of a vibro- impact bistable piezoelectric cantilever beam energy harvester [Volume 15, Issue 3, 2025, Pages 199-213]
  • Khoshkhoo, Rouhollah Comparative Analysis of Electro aerodynamic Propulsion and Electric Motors for the Zephyr 8 UAV [Volume 15, Issue 1, 2025, Pages 19-31]
  • Khosravi Soufi, Amir Numerical investigation of the effect of the shape of the cooling chamber containing paraffin phase change material on the performance of solar panels [Volume 15, Issue 1, 2025, Pages 105-116]
  • Koochakinejad Eramsadati, Ali Experimental and Numerical Investigation of the Effect of Blast Loading on Sandwich Structures with Metallic Lattice Cores [Volume 15, Issue 5, 2025]
  • Koohfar, Saeed Statistical analysis and optimization of variables affecting tensile and impact behavior of printed PETG samples using fused deposition modeling [Volume 15, Issue 2, 2025, Pages 81-93]

M

  • Maghsoudi Nejad, Mina Multi-objective optimization of L6e electric vehicle class body structure using the MOPSO method [Volume 15, Issue 4, 2025, Pages 241-252]
  • Mahdavi Keshavar, Omid Thermal Design of Midrex Direct Reduction Plant Recuperator [Volume 15, Issue 1, 2025, Pages 33-49]
  • Mahmoodi, Mohammad Javad Hierarchical Nonlinear Analysis of Creep-Recovery Behavior of Glass/Epoxy Hybrid Nanocomposite Reinforced by Silica Nanoparticles [Volume 15, Issue 2, 2025, Pages 1-16]
  • Mahmoudimehr, Javad Numerical investigation of the effect of opposing gas flow directions in adjacent cells on power generation and temperature distribution in a polymer electrolyte membrane fuel cell [Volume 15, Issue 4, 2025, Pages 311-330]
  • Mani, Mahmoud Experimental study of the sweep-back angle on the aerodynamic performance of a flapping flexible wing [Volume 15, Issue 6, 2026, Pages 535-544]
  • Mehdi zadeh Balani, Mehdi Numerical Investigation of the Effect of Height Ratio, Collector Angle, and Obstacle Presence in a Solar Chimney with a Two-Level Inlet [Volume 15, Issue 5, 2025, Pages 457-474]
  • Moaveni Tajoddin, Mahdi Numerical Investigation of Grazing Flow on a Micro Perforated Plate Liner [Volume 15, Issue 3, 2025, Pages 231-239]
  • Mohammad, Esam Non-linear Modeling and Design of Control System for an Aero Gas Turbine Engine Using NARMA L-2 Neural Network [Volume 15, Issue 4, 2025, Pages 297-309]
  • Mohammadi, Rafat Multi-Objective Optimization of the Natural Gas-Air Venturi-Type Mixer for Bi-Fuel Engines [Volume 15, Issue 3, 2025, Pages 165-182]
  • Mokhtari, Fahimeh Investigation of the Effects of Geometric and Structural Parameters of Carbon Nanotubes on Sound Absorption in an Argon Gas Environment Using a Molecular Dynamics Simulation Approach [Volume 15, Issue 6, 2026, Pages 475-489]
  • Molavi dosangani, Zahra Effect of Travel Speed on CK45 Steel Welding: A Comprehensive Analysis of Mechanical Properties, Corrosion Behavior, Energy Input, and Processing Time [Volume 15, Issue 5, 2025, Pages 411-425]
  • Monfared Mosghani, Mostafa Numerical Investigation of Rotational Domain Size on Aerodynamic Performance of the Caradonna-Tung Rotor in Hover Conditions [Volume 15, Issue 1, 2025, Pages 93-103]
  • Mortezaei Moghadam, Alisina Effect of Travel Speed on CK45 Steel Welding: A Comprehensive Analysis of Mechanical Properties, Corrosion Behavior, Energy Input, and Processing Time [Volume 15, Issue 5, 2025, Pages 411-425]
  • Motavasselolhagh, Mehrdad Investigating the effect of gyroscope on transverse vibrations and stability of milling tools with Euler-Bernoulli beam model [Volume 15, Issue 1, 2025, Pages 65-81]

N

  • Naseri, Shokrolah Finite Element Analysis of Twist Rate Role in High Pressure Torsion Process [Volume 15, Issue 4, 2025, Pages 253-266]
  • Nazari, Ahmad Estimating the amount of water loss due to evaporation in the Kalpoosh dam of Semnan province and investigating its reduction methods [Volume 15, Issue 3, 2025, Pages 223-229]
  • Nazari, Farshad The Effect of Forming Diameter and Rotational Speed on Characterization of Formed Tubes by Spinning Process [Volume 15, Issue 5, 2025, Pages 367-376]
  • Nazari Golshan, Akbar Using fractional derivatives in the analysis of magneto hydrodynamic flow in a diverging channel with concentrated flow injection from the walls with variable velocity [Volume 15, Issue 2, 2025, Pages 111-134]
  • Negahdari, Mohammad Reza Numerical Investigation of the Effect of Height Ratio, Collector Angle, and Obstacle Presence in a Solar Chimney with a Two-Level Inlet [Volume 15, Issue 5, 2025, Pages 457-474]
  • Nematzadeh, fardin Computational Study of the Effect of Torsional Loading on the Behavior of Nitinol Stents in the Femoropopliteal Artery [Volume 15, Issue 5, 2025, Pages 377-394]
  • Niaz, Motahareh Investigation of the buckling behavior of cylindrical unanchored steel storage tank under near field 3-D seismic loading [Volume 15, Issue 3, 2025, Pages 183-198]
  • Nikandish, Pezhman Presenting a Mathematical Model for Determining the Efficiency of the Fixed Displacement Radial Piston Pump [Volume 15, Issue 2, 2025, Pages 51-64]
  • Nikkhoo, Ali Investigation of the buckling behavior of cylindrical unanchored steel storage tank under near field 3-D seismic loading [Volume 15, Issue 3, 2025, Pages 183-198]
  • Niroo, Simin Investigating the effect of gyroscope on transverse vibrations and stability of milling tools with Euler-Bernoulli beam model [Volume 15, Issue 1, 2025, Pages 65-81]
  • Nosratollahi, Mehran Comparative Analysis of Electro aerodynamic Propulsion and Electric Motors for the Zephyr 8 UAV [Volume 15, Issue 1, 2025, Pages 19-31]
  • Nourazar, Seyyed Salman Using fractional derivatives in the analysis of magneto hydrodynamic flow in a diverging channel with concentrated flow injection from the walls with variable velocity [Volume 15, Issue 2, 2025, Pages 111-134]

P

  • Poormusavi, Seyed iman Effect of Oxygen Enriched Air Combined With EGR on Performance Parameters and Diesel Engine Emissions [Volume 15, Issue 5, 2025, Pages 427-442]
  • Poureini, R. Reduction of detrimental torsion in ionic polymer-metal composite actuators through coupled electrochemical-mechanical simulation [Volume 15, Issue 6, 2026, Pages 491-507]

R

  • Rabani, Mehran Effect of Creating Surface Textures and Using Nanofluid Lubricant on the Dynamic Stability of Noncircular Journal Bearings [Volume 15, Issue 2, 2025, Pages 135-151]
  • Ramezani voloojerdi, Mojtaba Experimental study of the sweep-back angle on the aerodynamic performance of a flapping flexible wing [Volume 15, Issue 6, 2026, Pages 535-544]
  • Rashidi, Ali Mohammad Finite Element Analysis of Twist Rate Role in High Pressure Torsion Process [Volume 15, Issue 4, 2025, Pages 253-266]
  • Rashidi Meybodi, Reza Effect of Creating Surface Textures and Using Nanofluid Lubricant on the Dynamic Stability of Noncircular Journal Bearings [Volume 15, Issue 2, 2025, Pages 135-151]
  • Rasoolizadeh Shooroki, Abolfazl Effect of Creating Surface Textures and Using Nanofluid Lubricant on the Dynamic Stability of Noncircular Journal Bearings [Volume 15, Issue 2, 2025, Pages 135-151]
  • Rastegar, Mojtaba Thermal Design of Midrex Direct Reduction Plant Recuperator [Volume 15, Issue 1, 2025, Pages 33-49]
  • Razfar, Mohammad Reza Polishing of artificial femoral head with coarse sisal fiber-based tool [Volume 15, Issue 6, 2026, Pages 509-519]

S

  • Saadati, Alireza The Effect of Forming Diameter and Rotational Speed on Characterization of Formed Tubes by Spinning Process [Volume 15, Issue 5, 2025, Pages 367-376]
  • Salari, Mohammadali Multi-Objective Optimization of the Natural Gas-Air Venturi-Type Mixer for Bi-Fuel Engines [Volume 15, Issue 3, 2025, Pages 165-182]
  • Salehifar, Mohamad Computational study of Supercritical Forced Oscillations in a Mixed-Compression Air Inlet at Mach Number of 2 [Volume 15, Issue 1, 2025, Pages 51-64]
  • Sarjoughian, Mostafa Simulation and analysis of chatter onset in orthogonal cutting process using an energy-based approach [Volume 15, Issue 5, 2025, Pages 331-347]
  • Sarkhosh, Reza Numerical investigation of radar reflection reduction of quadratic surfaces and conical sections made of aluminum in the X-band frequency range: A study based on electromagnetic permittivity and permeability [Volume 15, Issue 2, 2025, Pages 65-80]
  • Sedehi, Sayyed Mohammadreaz Effect of Travel Speed on CK45 Steel Welding: A Comprehensive Analysis of Mechanical Properties, Corrosion Behavior, Energy Input, and Processing Time [Volume 15, Issue 5, 2025, Pages 411-425]
  • Sepahi-Younsi, Javad Computational study of Supercritical Forced Oscillations in a Mixed-Compression Air Inlet at Mach Number of 2 [Volume 15, Issue 1, 2025, Pages 51-64]
  • Shabani Shahrbabaki, Abdollah Analysis of molybdenite powder reaction rate and temperature effect on reaction time [Volume 15, Issue 1, 2025, Pages 83-91]
  • Shahkolayi, Mohammad Numerical investigation of different combustion chamber geometries and injection angles in a direct injection diesel engine [Volume 15, Issue 2, 2025, Pages 95-110]
  • Shahsavar, Mostafa Numerical and Experimental study of a vibro- impact bistable piezoelectric cantilever beam energy harvester [Volume 15, Issue 3, 2025, Pages 199-213]
  • Shekari, Hasan Estimating the amount of water loss due to evaporation in the Kalpoosh dam of Semnan province and investigating its reduction methods [Volume 15, Issue 3, 2025, Pages 223-229]
  • Shojaei, Mohsen Non-linear Modeling and Design of Control System for an Aero Gas Turbine Engine Using NARMA L-2 Neural Network [Volume 15, Issue 4, 2025, Pages 297-309]
  • Shojaei, Seyed Alireza Numerical Investigation of Rotational Domain Size on Aerodynamic Performance of the Caradonna-Tung Rotor in Hover Conditions [Volume 15, Issue 1, 2025, Pages 93-103]
  • Shokrieh, M.M. Design and analysis of a 1 kW Darrieus vertical axis wind turbine with straight composite blades [Volume 15, Issue 1, 2025, Pages 1-17]
  • Soleimanimehr, Hamid Reduction of detrimental torsion in ionic polymer-metal composite actuators through coupled electrochemical-mechanical simulation [Volume 15, Issue 6, 2026, Pages 491-507]

T

  • Talebitooti, Roohollah Investigating the effect of gyroscope on transverse vibrations and stability of milling tools with Euler-Bernoulli beam model [Volume 15, Issue 1, 2025, Pages 65-81]
  • Tolami, Mohammad Using fractional derivatives in the analysis of magneto hydrodynamic flow in a diverging channel with concentrated flow injection from the walls with variable velocity [Volume 15, Issue 2, 2025, Pages 111-134]

V

  • Vahdati, Mahdi Statistical analysis and optimization of variables affecting tensile and impact behavior of printed PETG samples using fused deposition modeling [Volume 15, Issue 2, 2025, Pages 81-93]
  • Valimohammad, Afshin Non-linear Modeling and Design of Control System for an Aero Gas Turbine Engine Using NARMA L-2 Neural Network [Volume 15, Issue 4, 2025, Pages 297-309]
  • Viliani, N. Reduction of detrimental torsion in ionic polymer-metal composite actuators through coupled electrochemical-mechanical simulation [Volume 15, Issue 6, 2026, Pages 491-507]

Y

  • Yadollahnejad Kelmi, Vahid A Adaptable Fault Detection Method in Engineering Systems Using Machine Learning [Volume 15, Issue 2, 2025, Pages 33-50]
  • Yas, Mohammad Hossein Finite Element Analysis of Twist Rate Role in High Pressure Torsion Process [Volume 15, Issue 4, 2025, Pages 253-266]

Z

  • Zahmatkesh, Iman Numerical investigation of magnetohydrodynamic forced convection of phase change materials using the lattice Boltzmann method [Volume 15, Issue 6, 2026, Pages 545-565]
  • Zare Mehrjardi, Mahdi Effect of Creating Surface Textures and Using Nanofluid Lubricant on the Dynamic Stability of Noncircular Journal Bearings [Volume 15, Issue 2, 2025, Pages 135-151]
  • Zibaei, Mohammad Amin Numerical investigation of the effect of opposing gas flow directions in adjacent cells on power generation and temperature distribution in a polymer electrolyte membrane fuel cell [Volume 15, Issue 4, 2025, Pages 311-330]
  • Ziya-Shamami, Mojtaba Experimental and Numerical Investigation of the Effect of Blast Loading on Sandwich Structures with Metallic Lattice Cores [Volume 15, Issue 5, 2025]
  • Zolfaghari, Mojtaba Computational Study of the Effect of Torsional Loading on the Behavior of Nitinol Stents in the Femoropopliteal Artery [Volume 15, Issue 5, 2025, Pages 377-394]