<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>دانشگاه صنعتی شاهرود</PublisherName>
				<JournalTitle>مکانیک سازه ها و شاره ها</JournalTitle>
				<Issn>2251-9475</Issn>
				<Volume>16</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2026</Year>
					<Month>09</Month>
					<Day>23</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Improving the parameters affecting the agitator of the copper ore flotation cell of the Daralo copper complex concentration plant</ArticleTitle>
<VernacularTitle>بهبود پارامترهای اثرگذار بر همزن سلول فلوتاسیون کانسنگ مس کارخانه تغلیظ مجتمع مس درآلو</VernacularTitle>
			<FirstPage>415</FirstPage>
			<LastPage>429</LastPage>
			<ELocationID EIdType="pii">3992</ELocationID>
			
<ELocationID EIdType="doi">10.22044/jsfm.2026.17054.4025</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>سید امیر عباس</FirstName>
					<LastName>علومی</LastName>
<Affiliation>دانشکده مهندسی مکانیک، دانشگاه آزاد اسلامی  واحد یزد، یزد، ایران.</Affiliation>

</Author>
<Author>
					<FirstName>عبدالله</FirstName>
					<LastName>خالوئی</LastName>
<Affiliation>دانشکده مهندسی مکانیک، دانشگاه آزاد اسلامی واحد یزد، یزد، ایران</Affiliation>

</Author>
<Author>
					<FirstName>سید علی آقا</FirstName>
					<LastName>میرجلیلی</LastName>
<Affiliation>دانشکده مهندسی مکانیک، دانشگاه آزاد اسلامی واحد یزد، یزد، ایران.</Affiliation>

</Author>
<Author>
					<FirstName>محمد حسن</FirstName>
					<LastName>زارع</LastName>
<Affiliation>دانشکده مهندسی مکانیک، دانشگاه آزاد اسلامی واحد یزد، یزد، ایران.</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2025</Year>
					<Month>11</Month>
					<Day>17</Day>
				</PubDate>
			</History>
		<Abstract>Hydrodynamic components in column flotation have a great impact on the performance and efficiency of the process. In this study, the flotation process was modeled using the commercial software ANSYS Fluent. The modeling was performed in two phases using the volume of fluid (VOF) module. In the initial step, the independence of the solution from the grid was investigated, and then the validation of the developed numerical model was investigated. For different methods of using blades inside the flotation cell, the flow field, bubble diameter, and gas retention were investigated. The results showed that horizontal blade placement has the best performance in reducing axial mixing in the column. Using this blade placement method, the axial speed can be reduced by 75%. The presented results also showed that increasing the mixer rotation speed from 700 rpm leads to increased separation forces, and as a result, the recovery of copper particles inside the flotation cell decreases. On the other hand, increasing the speed of the agitator leads to increased instability of the foam phase. This can be attributed to the production of larger diameter bubbles due to the increase in the speed of the agitator. Larger bubbles mean higher surface energy and, as a result, lower copper particle recovery. Also, as the agitator moves closer to the lower part of the flotation cell, the effect of the turbulence created by the agitator rotation on the phase increases, making the foam phase more unstable and reducing the recovery of copper particles.</Abstract>
			<OtherAbstract Language="FA">مؤلفه‌های هیدرودینامیکی در فلوتاسیون ستونی تأثیر بسیار زیادی بر روی عملکرد و کارایی فرایند دارند. در این پژوهش به مدل‌سازی فرایند فلوتاسیون با استفاده از نرم‌افزار تجاری انسیس فلوئنت پرداخته شده است. مدل‌سازی به‌صورت دوفازی و با استفاده از مدول حجم سیال (VOF) انجام شده است. در گام نسخت به بررسی استقلال حل از شبکه پرداخته شده است و سپس اعتبارسنجی مدل عددی توسعه داده شده بررسی شده است. برای روش‌های مختلف استفاده از تیغه در داخل سلول فلوتاسیون، میدان جریان، قطر حباب‌ها و ماندگی گاز موردبررسی قرار گرفته است. نتایج نشان داد که تیغه گذاری افقی بهترین عملکرد را در کاهش اختلاط محوری در ستون دارد با استفاده از این روش تیغه گذاری می‌توان سرعت محوری را تا ۷۵% کاهش داد. همچنین نتایج ارائه شده نشان داد که افزایش سرعت گردش همزن از ۷۰۰ دور بر دقیقه منجر به بیشترشدن نیروهای جدایش می‌شود و به دنبال آن بازیابی ذرات مس در داخل سلول فلوتاسیون کم می‌شود. از سوی دیگر زیادشدن سرعت چرخش همزن منجر به زیادشدن ناپایداری فاز کف می‌شود. علت این امر را می‌توان تولید حباب‌های با قطر بیشتر در اثر افزایش سرعت چرخش همزن دانست. حباب‌های بزرگ‌تر به معنی انرژی سطحی بیشتر و در نتیجه بازیابی ذرات مس کمتر است. همچنین با نزدیک‌تر شدن همزن به بخش تحتانی سلول فلوتاسیون، تأثیر اغتشاش ایجاد شده در اثر گردش همزن بر روی فاز زیاد می‌شود و فاز کف را ناپایدارتر می‌کند و بازیابی ذرات مس را کم می‌کند. با زیادشدن غلظت کف‌ساز، اندازه حباب‌های تولید شده کم می‌شود.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">فلوتاسیون</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">تغلیظ مس</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">دینامیک سیالات محاسباتی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">مجتمع مس درآلو</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jsfm.shahroodut.ac.ir/article_3992_bcbbbe4c8c602d6a0aa2fb7a5e04b761.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
