<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>Shahrood University of Technology</PublisherName>
				<JournalTitle>Journal of Solid and Fluid Mechanics</JournalTitle>
				<Issn>2251-9475</Issn>
				<Volume>11</Volume>
				<Issue>3</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>07</Month>
					<Day>23</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Investigation of parameters affecting the roughness and cylindricality of holes in PLA parts made of 3D printing by fused deposition modeling process using response surface method</ArticleTitle>
<VernacularTitle>Investigation of parameters affecting the roughness and cylindricality of holes in PLA parts made of 3D printing by fused deposition modeling process using response surface method</VernacularTitle>
			<FirstPage>119</FirstPage>
			<LastPage>133</LastPage>
			<ELocationID EIdType="pii">2209</ELocationID>
			
<ELocationID EIdType="doi">10.22044/jsfm.2021.2209</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>M.</FirstName>
					<LastName>Khosravi</LastName>
<Affiliation>Birjand University of Technology, Birjand , Iran</Affiliation>

</Author>
<Author>
					<FirstName>Seyed M.</FirstName>
					<LastName>Hosseini</LastName>
<Affiliation>Birjand University of Technology , Birjand , Iran</Affiliation>

</Author>
<Author>
					<FirstName>M.</FirstName>
					<LastName>Lakhi</LastName>
<Affiliation>Department of Mechanical Engineering, Faculty of Engineering, University of Birjand, Birjand, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2020</Year>
					<Month>12</Month>
					<Day>19</Day>
				</PubDate>
			</History>
		<Abstract>In this paper, the effects of input parameters on the roughness and cylindricality of a hole were investigated using fused deposition modeling (FDM). The roughness and dimensional accuracy are very important for a 3D printed part. The investigated input parameters are injection speed, solid percentage, and layer thickness. The experiments were designed using the response surface method and 51 PLA samples were printed. To measure the roughness and dimensions of the manufactured products, a roughness-testing machine and a coordinate measuring machine (CMM) were used. The basis of this study is the comparison of roughness and deviation from the center to find the optimal set of the investigated parameters to achieve higher quality.&lt;br /&gt;The optimal levels of parameters for the minimum simultaneous roughness (0.016 mm) and cylindricality (5.98 microns) are a layer thickness of 0.1 mm, injection speed of 40 mm / s, and solidity percentage of 15% when the pattern is triangular. The results also suggest that the layer thickness has the strongest effect on the surface quality in comparison with the injection speed and percentage of solidity.</Abstract>
			<OtherAbstract Language="FA">In this paper, the effects of input parameters on the roughness and cylindricality of a hole were investigated using fused deposition modeling (FDM). The roughness and dimensional accuracy are very important for a 3D printed part. The investigated input parameters are injection speed, solid percentage, and layer thickness. The experiments were designed using the response surface method and 51 PLA samples were printed. To measure the roughness and dimensions of the manufactured products, a roughness-testing machine and a coordinate measuring machine (CMM) were used. The basis of this study is the comparison of roughness and deviation from the center to find the optimal set of the investigated parameters to achieve higher quality.&lt;br /&gt;The optimal levels of parameters for the minimum simultaneous roughness (0.016 mm) and cylindricality (5.98 microns) are a layer thickness of 0.1 mm, injection speed of 40 mm / s, and solidity percentage of 15% when the pattern is triangular. The results also suggest that the layer thickness has the strongest effect on the surface quality in comparison with the injection speed and percentage of solidity.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Rapid Prototyping</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">3D Printer</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Fused Deposition Modeling</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">response surface method</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jsfm.shahroodut.ac.ir/article_2209_18c5d565ef7280ee1a0214a125afe54f.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
