<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>دانشگاه صنعتی شاهرود</PublisherName>
				<JournalTitle>مکانیک سازه ها و شاره ها</JournalTitle>
				<Issn>2251-9475</Issn>
				<Volume>3</Volume>
				<Issue>3</Issue>
				<PubDate PubStatus="epublish">
					<Year>2013</Year>
					<Month>09</Month>
					<Day>23</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Investigating Bauschinger Effect in the Autofrettaged Tubes made of
7075 Aluminum Alloy using Experimental Data</ArticleTitle>
<VernacularTitle>بررسی اثر باشینگر در لوله های اتوفرتاژ شده از جنس آلیاژ آلومینیوم A7075 با استفاده از داده های تجربی</VernacularTitle>
			<FirstPage>11</FirstPage>
			<LastPage>18</LastPage>
			<ELocationID EIdType="pii">201</ELocationID>
			
<ELocationID EIdType="doi">10.22044/jsfm.2013.201</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>کریم</FirstName>
					<LastName>علی اکبری</LastName>
<Affiliation>دانشجو/دانشگاه فردوسی مشهد</Affiliation>

</Author>
<Author>
					<FirstName>خلیل</FirstName>
					<LastName>فرهنگدوست</LastName>
<Affiliation>دانشیار</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2013</Year>
					<Month>02</Month>
					<Day>27</Day>
				</PubDate>
			</History>
		<Abstract>A7075 aluminum alloy is considered as a high-strength alloy which is used making under-pressure tubes according to ASTM B210M–05 standard. Finding an appropriate model for investigating Bauschinger effect factor in A7075 aluminum alloy behavior plays an important role analyzing the process of autofrettaged tubes. For this purpose, the results of experimental data of uniaxial tension- compression tests have been used. In order to carry out the tests, an Instron servo-hydraulic machine has been used. The samples were made having 12.5 mm based on ASTM standard E8M-97a. The fact that plastic strain created in these alloys is considered as unloading characteristic, to model the material behavior, the series of these tests on the basis of plastic deformation is done differently. In this research, tests were done at plastic strains up to 4.3%. Also in this paper, many important problems including the amount of plastic strain on determining Young’s modulus and Bauschinger effect factor were tested. In this research, to determine the amount of tension- compression yield, the amount of offset has been considered as 0.01%.</Abstract>
			<OtherAbstract Language="FA">آلیاژ آلومینیوم A7075 جزء آلیاژهای پراستحکام در نوع خود محسوب می¬شود که مطابق با استاندارد ASTM B210M–05، در ساخت لوله های تحت فشار کاربرد دارد. پیدا کردن مدل مناسب جهت بررسی اثر باشینگر در آلیاژ آلومینیوم A7075 نقش مهمی در تحلیل فرآیند اتوفرتاژ لوله ها دارد. برای این منظور از نتایج آزمایشگاهی تست¬های کشش- فشار تک محوره استفاده شده است و برای انجام آزمایش¬¬ها از یک دستگاه سروهیدرولیک اینسترون استفاده گردید. نمونه ها با قطر 5/12 میلیمتر ساخته شدند که مطابق با استاندارد ASTM E8M-97a می باشد. با توجه به اینکه در این آلیاژها معمولا کرنش پلاستیک ایجاد شده به عنوان مشخصه باربرداری می باشد، بنابراین برای مدل¬سازی رفتار این ماده لازم است آزمایش¬های مذکور با کرنش¬های پلاستیک متفاوت انجام گیرد. در این تحقیق، آزمایش¬ها تا کرنش کلی 3/4% انجام شده است. همچنین موارد مهمی از جمله تاثیر مقدار کرنش های پلاستیک ایجاد شده بر مدول یانگ و ضریب اثر باشینگر تست شده اند. در این مقاله، برای مشخص شدن اندازه تسلیم کششی و فشاری، مقدار افست بر اساس قرارداد 0.01 درصد در نظر گرفته شده است.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">لوله های جدار ضخیم</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">فرآیند اتوفرتاژ</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">ضریب اثر باشینگر</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">مدل سازی ماده</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">آلیاژ آلومینیوم A7075</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jsfm.shahroodut.ac.ir/article_201_1d94fd41fdd9fccf05377a406dca0372.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
