<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>Shahrood University of Technology</PublisherName>
				<JournalTitle>Journal of Solid and Fluid Mechanics</JournalTitle>
				<Issn>2251-9475</Issn>
				<Volume>7</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2017</Year>
					<Month>12</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Multi-objective optimization of electrochemical machining parameters using response surface methodology</ArticleTitle>
<VernacularTitle>Multi-objective optimization of electrochemical machining parameters using response surface methodology</VernacularTitle>
			<FirstPage>49</FirstPage>
			<LastPage>60</LastPage>
			<ELocationID EIdType="pii">1168</ELocationID>
			
<ELocationID EIdType="doi">10.22044/jsfm.2017.4934.2233</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>A.</FirstName>
					<LastName>Mehrvar</LastName>
<Affiliation>Mechanical Engineering group, Faculty of Engineering, University of Shahreza</Affiliation>

</Author>
<Author>
					<FirstName>A.</FirstName>
					<LastName>Basti</LastName>
<Affiliation></Affiliation>

</Author>
<Author>
					<FirstName>A.</FirstName>
					<LastName>Jamali</LastName>
<Affiliation>Faculty of University of Guilan</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2016</Year>
					<Month>10</Month>
					<Day>24</Day>
				</PubDate>
			</History>
		<Abstract>Electrochemical machining (ECM) process involves several physical and chemical phenomena that make it difficult to model the process.Therefore, selection of proper and optimal parameters setting is a challenging issue. In this paper, an approach is applied to look for the optimum solution to this problem. In this way, four parameters, i.e. voltage, tool feed rate, electrolyte flow rate and electrolyte concentration; and two machining criteria, i.e. material removal rate (MRR) and surface roughness (Ra) are considered as input variables and responses, respectively. Therefore, mathematical models have first been developed using response surface methodology (RSM). Then, the Derringer method has been utilized for optimizing the two responses simultaneously. MRR and Ra response would not be optimized in the same manner and have contradictive behaviors. The result of multi-objective optimization provides an optimal ECM process parameter setting, so the user can select desired optimal process parameters combination to achieve the optimal result. The optimal input parameters were determined as 25.56 V, 0.5 mm/min, 6.45 l/min, 138.1 g/l. Finally, optimization result was verified experimentally and the percentage error were 6.4 and 6.7 for MRR and Ra responses respectively.</Abstract>
			<OtherAbstract Language="FA">Electrochemical machining (ECM) process involves several physical and chemical phenomena that make it difficult to model the process.Therefore, selection of proper and optimal parameters setting is a challenging issue. In this paper, an approach is applied to look for the optimum solution to this problem. In this way, four parameters, i.e. voltage, tool feed rate, electrolyte flow rate and electrolyte concentration; and two machining criteria, i.e. material removal rate (MRR) and surface roughness (Ra) are considered as input variables and responses, respectively. Therefore, mathematical models have first been developed using response surface methodology (RSM). Then, the Derringer method has been utilized for optimizing the two responses simultaneously. MRR and Ra response would not be optimized in the same manner and have contradictive behaviors. The result of multi-objective optimization provides an optimal ECM process parameter setting, so the user can select desired optimal process parameters combination to achieve the optimal result. The optimal input parameters were determined as 25.56 V, 0.5 mm/min, 6.45 l/min, 138.1 g/l. Finally, optimization result was verified experimentally and the percentage error were 6.4 and 6.7 for MRR and Ra responses respectively.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Electrochemical machining</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Optimization</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">response surface methodology</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Derringer method</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jsfm.shahroodut.ac.ir/article_1168_d585946923bbdb297a940dc40778a79d.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
