@article { author = {Arjmand, O. and Gerdooei, M. and Khosravi, H. and Izadpanah, S.}, title = {Experimental Analysis of the Strain Effect on the Anisotropic Coefficients of 6061 Aluminum Sheet Using Digital Image Processing}, journal = {Journal of Solid and Fluid Mechanics}, volume = {6}, number = {1}, pages = {73-84}, year = {2016}, publisher = {Shahrood University of Technology}, issn = {2251-9475}, eissn = {2251-9483}, doi = {10.22044/jsfm.2016.690}, abstract = {The anisotropy of mechanical property in sheet metals due to their rolling process causes the useful effects of increasing in drawability and harmful effects of earing phenomenon. In the present study, the variation of the anisotropic coefficient during the uniaxial tension of AA6061-O sheet has been considered using digital image correlation technique by two marking methods of regular arrays of circles and irregular accidental pattern. Meshed samples of this alloy are cut in three directions 0, 45 and 90 degrees with respect to the rolling direction and stretched by Instron test machine. During the test, transverse and longitudinal strains are measured and then by using these two parameters anisotropic parameters in different directions as more asthe planar and normal anisotropic coefficients are computed. It demonstrated that, during the straining on samples the anisotropic parameters in 0 and 45 direction showed decreasing trend and in 90 direction it has a wavy manner. The results indicated that after 10 percent elongation the normal and planar anisotropy of sheet decreased by 51% and 63%, respectively. Finally the plastic hardening behavior of sheet in different stages of the tension by using of the Hill’s quadratic yield criterion was studied and appeared that the yield surface grows totally as an anisotropic manner.}, keywords = {Digital image correlation,Regular and accidental grid patterns,Plastic anisotropic coefficient}, title_fa = {تحلیل تجربی اثر میزان کرنش بر ضرایب ناهمسانگردی ورق آلومینیوم 6061 با استفاده از روش آنالیز تصاویر دیجیتال}, abstract_fa = {ناهمسانگردی ورق‌های فلزی تولید شده از نورد، اگرچه موجب افزایش کشش‌پذیری می‌شود اما اثرات مضر ناخواسته‌ای چون پدیده‌ی گوشواره‌ای شدن را موجب می‌شود. در این تحقیق به بررسی تغییرات ضرایب ناهمسانگردی با افزایش تغییر شکل در آزمون کشش تک محوری آلومینیوم آلیاژیAA6061-O با استفاده از روش همبستگی تصاویر دیجیتال دردو حالت شبکه‌بندی منظم دایره‌ای و نامنظم تصادفی پرداخته شده است. نمونه‌های برش شده در جهات صفر، 45 و 90 درجه نسبت به راستای نورد پس از شبکه‌بندی توسط دستگاه کشش اینسترون کشیده و مقادیر کرنش طولی و عرضی در حین فرآیند محاسبه شده است. در ادامه با این مقادیر ضرایب ناهمسانگردی در جهات مذکور و همچنین تغییرات ضرایب ناهمسانگردی نرمال و ناهمسانگردی صفحه‌ای با پیشرفت فرآیند محاسبه‌گردید که مشخص شد با افزایش کرنش، ضرایب ناهمسانگردی در راستای صفر و 45 درجه روندی نزولی و در راستای 90 درجه دارای رفتار نوسانی می‌باشد. نتایج نشان داد که با اعمال 10 درصد کرنش طولی در ورق، ضریب ناهمسانگردی نرمال و قدر مطلق ناهمسانگردی صفحه‌ای به‌ترتیب 51 درصد و 63 درصد کاهش می‌یابد. در پایان نحوه‌ی سخت‌شوندگی پلاستیک ورق بر اساس معیار تسلیم هیل درجه‌ی دو، در حین کشش مورد بررسی قرار گرفت و مشخص‌شد که نحوه رشد سطح تسلیم کاملاً ناهمسانگرد می‌باشد.}, keywords_fa = {پیوستگی تصاویر دیجیتال,شبکه بندی منظم و تصادفی,ضریب ناهمسانگردی پلاستیک}, url = {https://jsfm.shahroodut.ac.ir/article_690.html}, eprint = {https://jsfm.shahroodut.ac.ir/article_690_16f7dddddca13f3f270370e5e9094aa3.pdf} }