@article { author = {Safavi, K. and Moghimi, I. and Yaghooti, B. and Salarieh, H. and Alasty, A.}, title = {Force and stress analysis of double press machine in use with single-action die press}, journal = {Journal of Solid and Fluid Mechanics}, volume = {6}, number = {1}, pages = {167-177}, year = {2016}, publisher = {Shahrood University of Technology}, issn = {2251-9475}, eissn = {2251-9483}, doi = {10.22044/jsfm.2016.646}, abstract = {Industrial press units have divided into two primary groups; single action and double action. Single action press has a mechanism that guide drawing slide. Double action unit has blank holder mechanism too. Double action press die has more weight and in conclusion is more expensive than a single action. For the mentioned reasons, sometimes a single action die is utilized for a double action press in which the blank holder mechanism is not used and the unit is changed to a single action one. The main goal of this article is dynamic and stress analysis of this case. In this paper, for kinematic analysis, mathematical model of the mechanism is obtained. Then dynamic analysis of a double action mechanism with standard die and also with small die of single action case, have been provided. This research has ended with stress analysis of these two states. Simulations show that use of single action die for double action press increase the force and stress in the ram mechanism joints. So this usage in double action press, increase the failure chance in the press mechanism.}, keywords = {Double action press,Single action press die,Ram mechanism,Blank holder,Stress analysis}, title_fa = {تحلیل نیرو و تنش دستگاه پرس دومرحله در کاربرد با قالب متعلق به پرس یک‌مرحله}, abstract_fa = {دستگاه‌های پرس صنعتی از نظر مکانیزم به دو گروه اصلی تک‌عمله (تک‌مرحله) و دوعمله (دومرحله) تقسیم می‌شوند. دستگاه پرس تک‌عمله یک مکانیزم اصلی دارد که سنبه را هدایت می‌کند. پرس دوعمله علاوه بر مکانیزم ذکر شده، دارای مکانیزم ورق‌گیر نیز هست. قالب دستگاه دوعمله، وزن و در نتیجه هزینه بالاتری نسبت به قالب دستگاه تک‌عمله دارد. در برخی از موارد، قالب کوچک پرس تک‌عمله را برای پرس دوعمله به کار می‌گیرند، در این صورت مکانیزم ورق‌گیر بی‌استفاده شده و پرس عملاً تک‌عمله می‌شود. هدف این پژوهش، بررسی دینامیکی و تحلیل سازه‌ای حالت اخیر است. در این مقاله، ابتدا برای بررسی سینماتیک مکانیزم، مدل‌سازی ریاضی آن انجام می‌شود. در ادامه، تحلیل نیرویی مکانیزم دوعمله با قالب استاندارد و قالب کوچک حالت تک‌عمله انجام می‌شود. این پژوهش با تحلیل تنش این دو حالت پایان می‌یابد. در انتهای این بررسی، مشخص شد که به کار بردن قالب پرس تک‌عمله برای پرس دوعمله، نیروها و تنش‌های وارد به مفاصل مکانیزم سنبه‌زن پرس را نسبت به حالت معمول، افزایش چشم‌گیری می‌دهد. بنابراین، به کار بردن قالب‌های تک‌عمله علی‌رغم کاهش هزینه‌های ساخت قالب، امکان خرابی و شکست رابط‌بندی پرس را بالا برده و در نتیجه، به هزینه‌های تعمیر و نگه‌داری دستگاه پرس خواهد افزود.}, keywords_fa = {پرس دوعمله,قالب پرس تک‌عمله,مکانیزم سنبه‌زن,ورق گیر,تحلیل تنش}, url = {https://jsfm.shahroodut.ac.ir/article_646.html}, eprint = {https://jsfm.shahroodut.ac.ir/article_646_2b18ed28308356d82446381ad7918909.pdf} }