@article { author = {نیلی احمدآبادی, مهدی and ربیعی, علیرضا and روشنی, محمدرضا}, title = {One Dimensional Design of Single, Two and Three-Stage Ejector of a Hypersonic Wind Tunnel}, journal = {Journal of Solid and Fluid Mechanics}, volume = {1}, number = {2}, pages = {57-68}, year = {2012}, publisher = {Shahrood University of Technology}, issn = {2251-9475}, eissn = {2251-9483}, doi = {10.22044/jsfm.2012.51}, abstract = {One of the most common facilities utilized in supersonic wind tunnels is multi-stage ejector system. In this system high speed air blowing with specified Mach numbers into the wind tunnel at predetermined points, helps to obtain the desired Mach number in the test section. In this study, according to characteristics of test section including Mach number, static temperature and stagnation pressure, relevant prominent features of the single-stage, two-stage and three-stage ejectors such as mass flow, velocity and stagnation pressure are computed. Two different aspects are implemented in solving governing equations of ejectors; first one is to assume the same Mach number for all ejectors and second one is based on assumption of the same stagnation pressure for the ejectors. It will be revealed that the later one is more optimal in comparison with the former criteria. Validation of the developed computational code results is performed via comparison with the experimental data of a wind tunnel operating at Mach number 2, which resulted in a difference of 5 to 7 percent. At the earlier section, design parameters of single ejector versus different mach numbers of the test section are presented and then effect of outlet static pressure reduction as a means of vacuum generation at the exhaust of the wind tunnel is discussed. Furthermore design of two-stage ejector according to both methods of equal Mach number and the same stagnation pressure is completed and in the last section three-stage ejector is studied base on the same stagnation pressure for comprising ejectors.}, keywords = {Hypersonic Wind Tunnel,Multi-Stage Ejector System,Mach number}, title_fa = {طراحی یک بعدی اجکتور یک، دو و سه مرحله ای تونل باد فراصوتی}, abstract_fa = {یکی از روشهای بسیار متداول در تونلهای باد فراصوتی استفاده از سیستم اجکتور میباشد. در این سیستم با دمش هوای پر سرعت در مقطع مشخصی از تونل باد میتوان عدد ماخ مورد نیاز محفظه آزمون را ایجاد کرد. در تحقیق حاضر با در نظر گرفتن ابعاد، عدد ماخ، دمای استاتیک و فشار سکون محفظه آزمون پارامترهای مورد نیاز اجکتور تک مرحله ای، دو مرحله ای و سه مرحله ای تونل باد شامل دبی، سرعت و فشار سکون محاسبه شده است. در طراحی صورت گرفته دو فرض اساسی برای حل معادلات حاکم استفاده شده است. اول اینکه فشارسکون برای هر سه اجکتور برابر باشد و دومین فرض اینکه عدد ماخ هر سه اجکتور برابر باشد. برای ارزیابی صحت نتایج کد محاسباتی توسعه داده شده ، از نتایج آزمایشگاهی تونل باد با عدد ماخ محفظه آزمون برابر 2 استفاده شده است که نتایج اختلاف بین 5 تا 7 درصد را نشان می دهد. ابتدا نتایج طراحی اجکتور تک مرحله ای متأثر از تغییر عد ماخ محفظه آزمون ارائه گردیده و سپس اثر کاهش فشار استاتیک خروجی به عنوان ابزار ایجاد خلأ در خروجی تونل باد برای اجکتور تک مرحله ای مورد مطالعه قرار گرفته است. همچنین نتایج طراحی اجکتور دو مرحله ای با دو فرض برابری عدد ماخ و نیز برابری فشار سکون اجکتورها ارائه شده است و در نهایت طراحی اجکتور سه مرحله ای به عنوان آخرین بخش تحقیق مورد مطالعه قرار گرفته است.}, keywords_fa = {تونل باد فراصوتی,سیستم اجکتور,عدد ماخ}, url = {https://jsfm.shahroodut.ac.ir/article_51.html}, eprint = {https://jsfm.shahroodut.ac.ir/article_51_ffdd5f28b705dc8c0d4fb7f83667a3a3.pdf} }