@article { author = {حسن‌نیا دون, میلاد and عباس نژاد, علی and معظمی گودرزی, علی}, title = {Experimental Investigation of Fresnel Lens Application in a Solar Water Heater with the Electricity Generation via Thermoelectric Module}, journal = {Journal of Solid and Fluid Mechanics}, volume = {4}, number = {3}, pages = {159-169}, year = {2014}, publisher = {Shahrood University of Technology}, issn = {2251-9475}, eissn = {2251-9483}, doi = {10.22044/jsfm.2014.348}, abstract = {The aim of this paper is to investigate cogeneration of electricity and hot water. In the presented design, thermoelectric module has been devised in the path of heat transfer from solar heat absorber surface to a water reserve. Besides, Fresnel lens is employed to concentrate sunlight as well as to reach justified temperature by the means of thermoelectric modules. The Fresnel lens belongs to a class of point focus lenses, which its dimension is 30*30 cm2. In order to optimal use of the thermoelectric capacity, it is proposed to devise an array of Fresnel lenses which can transfer heat to the thermoelectric module via mineral oil. The results show that approximately 186W thermal power and 6W electric power can be obtained by use of a thermoelectric module (type TEP1-12656-0.6) and 6 Fresnel lenses. Results indicate that the maximum thermoelectric power generation is 1.08W under radiation intensity of 705.98 W/m2. Moreover, thermal efficiency of system is about 51.85%.}, keywords = {Fresnel lens,thermoelectric generator,solar water heater,cogeneration}, title_fa = {بررسی تجربی استفاده از لنز فرزنل در یک سیستم آبگرمکن خورشیدی با قابلیت تولید برق به وسیله مدول ترموالکتریک}, abstract_fa = {تولید همزمان برق و آب گرم از انرژی خورشید موضوع پژوهش مورد مطالعه در این مقاله می‌باشد. در طرح ارائه شده از مدول‌های ترموالکتریک در مسیر انتقال گرما از سطح جاذب گرمای خورشید به انباره آب استفاده شده است. همچنین برای متمرکز نمودن نور خورشید و رسیدن به دمای قابل توجیه برای تولید برق به وسیله‌ی ترموالکتریک، از لنزهای فرزنل استفاده می‌شود. لنز فرزنل بکار برده شده از نوع متمرکز کننده نقطه‌ای بوده که ابعاد آن 30×30سانتی‌متر مربع می‌باشد. برای استفاده بهینه از ظرفیت تولید برق مدول ترموالکتریک، پیشنهاد شده است که از آرایه‌ای از لنزهای فرزنل استفاده شود که به واسطه جریانی از روغن (به عنوان سیال حامل) گرما را به مدول ترموالکتریک منتقل می‌کند. بر اساس طرح ارائه شده، می‌توان با استفاده از 6 عدد لنز فرزنل، توان الکتریکی در حدود 6 وات از یک مدول ترموالکتریک از نوع "TEP1-12656-0.6" بدست آورد. در این حالت توان تولید آب گرم در حدود 186 وات می باشد. نتایج آزمایشگاهی نشان می‌دهد که میزان ماکزیمم توان الکتریکی ترموالکتریک 08/1 وات تحت شدت تابش 98/705 وات بر مترمربع است و در این حالت راندمان گرمایی سیستم در حدود 85/51 درصد می‌باشد.}, keywords_fa = {لنز فرزنل,مولد ترموالکتریک,آبگرمکن خورشیدی,تولید همزمان برق و حرارت}, url = {https://jsfm.shahroodut.ac.ir/article_348.html}, eprint = {https://jsfm.shahroodut.ac.ir/article_348_34255e5cf1749fc1b3328c313582c8f9.pdf} }