@article { author = {Hatami, Hossein}, title = {Experimental and analytical investigation of bending and impact properties of steel composite beams with high performance concrete}, journal = {Journal of Solid and Fluid Mechanics}, volume = {12}, number = {6}, pages = {99-111}, year = {2023}, publisher = {Shahrood University of Technology}, issn = {2251-9475}, eissn = {2251-9483}, doi = {10.22044/jsfm.2023.12514.3680}, abstract = {In this research, the mechanical properties including bending strength and impact resistance for steel composite beams with high performance concrete are discussed. In the construction of the steel part of the specimens, the shield cross-section grade 4 is used in the tensile part of the sheet with a thickness of 5 mm and two widths of 30 and 40 mm and a length of 70 cm. It should be noted that the compression wing of some specimens is made of concrete with Different steel reinforced fibers. Self-compacting concrete with 3 percent of different steel fibers, which are 0, 0.5, and 1 percent, was used in making the concrete of the specimens. The results of the impact tests showed that the amount of energy absorption as well as the initial maximum force increased with the increase in the fibers percentage that the highest energy absorption is related to the w4hc4sf1 beam, which has increased by 0.09% compared to the specimen without concrete. Regarding the results of the bending test, the resistance value increased intermittently with the increase of fibers. The w4hc4sf1 beam had the best performance, and its strength increase compared to the same specimen without concrete was equal to 204%.}, keywords = {High Performance Concrete,Bending,Impact,Composite}, title_fa = {بررسی تجربی و تحلیلی خواص خمشی و ضربه ای تیرهای کامپوزیتی فولادی با بتن با عملکرد بالا}, abstract_fa = {در این تحقیق به خصوصیات مکانیکی شامل مقاومت خمشی و مقاومت در برابر ضربه برای تیرهای کامپوزیت فولادی با بتن با عملکرد بالا پرداخته می شود. در ساخت قسمت فولادی نمونه ها از مقطع سپری نمره 4 که در قسمت کششی از ورق با ضخامت 5 میلیمتر و در دو عرض 30 و 40 میلیمتر به طول 70 سانتیمتر استفاده می شود. لازم به ذکر است بال فشاری تعدادی از نمونه ها به وسیله بتن با نسبت الیاف فولادی متفاوت تقویت شده است. در ساخت بتن، نمونه ها از بتن خودمتراکم با 3 درصد الیاف فولادی متفاوت که عبارتند از 0 ،5/0 و 1 درصد استفاده گردید. نتایج آزمایش های ضربه نشان می دهد میزان جذب انرژی و همچنین نیروی بیشینه اولیه با افزایش درصد الیاف افزایش یافته است، به طوری که بیشترین جذب انرژی مربوط به تیر با عمق بتن 4 سانتی متر و درصد فیبر 1 درصد می باشد که نسبت به نمونه بدون بتن 09/0درصد افزایش داشته است. در مورد نتایج آزمایش خمشی نیز با بیشتر شدن الیاف، مقدار مقاومت بطور متناوب افزایش یافت به طوری که تیر مذکور بهترین عملکرد را داشته که افزایش مقاومت آن نسبت به نمونه مشابه بدون بتن برابر 204 درصد بوده است.}, keywords_fa = {بتن با عملکرد بالا,خمش,ضربه,کامپوزیت}, url = {https://jsfm.shahroodut.ac.ir/article_2717.html}, eprint = {https://jsfm.shahroodut.ac.ir/article_2717_0bef74a8ecf55108ad9049e4d241ed93.pdf} }