@article { author = {ملک زاده, امیر and Farhang dost, Khalil and Hadidi- Moud, Saeed}, title = {The effect of impact loadingon crack propagation in forgedsteel EA4T}, journal = {Journal of Solid and Fluid Mechanics}, volume = {3}, number = {2}, pages = {33-39}, year = {2013}, publisher = {Shahrood University of Technology}, issn = {2251-9475}, eissn = {2251-9483}, doi = {10.22044/jsfm.2013.193}, abstract = {This paper presents the results of the experimental and analytical investigation carried out using a steel forged material, EA4T, subjected to impact loading conditions within the strain rate domain101-103(1/s). The standard three point bend test specimens manufactured according to ASTM 399 standard were subjected to impact loadlevels correspondingto preset defined impact energy levels by applying the Izod impact testing equipment. The specimens were also modeled and the loading condition was simulated using the finite element commercial software, ABAQUS v6.11.Both the experimental findings and the finite element analysis results indicated that the crack initiation conditions were satisfied when the impact energy applied to the specimen reached a specifiedlevel.It was found that for a lower level of applied impact energy, the impact loading resulted in improving the fatigue characteristic of the material.In contrast, application of the higher impact energy caused the crack to propagate further. The other finding of the study was that increasing the plastic zone size decreased the crack propagation rate (da/dE).}, keywords = {impact loading,Crack Propagation,impact energy,Strain rate,steelforged EA4T}, title_fa = {بررسی اثر بارگذاری ضربه ای در فرآیند رشد ترک در فولاد فورجEA4T}, abstract_fa = {با توجه به کاربرد گسترده‌ی مواد فلزی تحت شرایط بارگذاری ضربه‌ای در صنایع مختلف، در تحقیق حاضر فرایند رشد ترک در نمونه‌ی استاندارد خمش سه نقطه و در محدوده ی نرخ کرنش〖10〗^1-〖10〗^3 (1/s) ، برای فولاد فورج پرکاربرد در ساخت محور چرخ واگن، بررسی شده است. مقادیر تجربی بدست آمده در نتیجه‌ی اعمال انرژی ضربه معین با استفاده از آزمایش ضربه سقوط وزنه با مقادیر تحلیلی محاسبه شده به روش اجزای محدود برای نمونه مورد آزمایش مقایسه شده است. نتایج نشان می‌دهد که حد معینی از انرژی ضربه ای برای ایجاد ناحیه پلاستیک نوک ترک وجود دارد که می‌تواند موجب جوانه زنی ترک  گردد. چنانچه انرژی ضربه کمتر از حد تعیین شده باشد، بار ضربه‌ای موجب افزایش مقاومت در برابر رشد ترک و در نتیجه بهبود خواص ماده می‌شود. با اعمال انرژی ضربه بیش از حد تعیین شده، ترک در نمونه رشد خواهد کرد و نرخ رشد ترک با افزایش اندازه ی ناحیه ی پلاستیک نوک ترک کاهش می‌یابد.}, keywords_fa = {: بارگذاری ضربه‌ای,رشد ترک,انرژی ضربه,نرخ کرنش بالا,فولاد فورج EA4T}, url = {https://jsfm.shahroodut.ac.ir/article_193.html}, eprint = {https://jsfm.shahroodut.ac.ir/article_193_ab7ce033889bc1f548be51928952cf30.pdf} }