@article { author = {Eslami-Farsani, Reza and خلیلی, سید محمدرضا and زنگی آبادی, علیرضا and عباس بنایی, کوشا}, title = {The effects of the single filament and the fiber tow test methods on mechanical properties of carbon fibers}, journal = {Journal of Solid and Fluid Mechanics}, volume = {3}, number = {2}, pages = {1-10}, year = {2013}, publisher = {Shahrood University of Technology}, issn = {2251-9475}, eissn = {2251-9483}, doi = {10.22044/jsfm.2013.190}, abstract = {The strength of the reinforcing fibers is the main factor affecting the strength of the composites, therefore, accurate method for measuring the strength is needed. There are two methods for determining the strength of the reinforcing fibers (e.g. carbon fiber). They are the methods of single filament and the fiber tow test (fibers impregnated with resin). The main goal of this research is to find the correct procedure of testing carbon fibers with two different methods of single filament and fiber tow test, so comparing the mechanical properties of two types of PAN based carbon fibers given by those methods. The fibers used in this research were two types of carbon fibers and their mechanical properties like tensile strength, tensile modulus, breaking strain and fracture energy were studied in both test methods. The results show that although the single filament test method is quite difficult but compared with the fiber tow test method gives higher values for tensile strength and fracture energy whereas lower value for tensile modulus and breaking strain.}, keywords = {Carbon Fibers,Tensile properties,Single filament test,Tow test}, title_fa = {تاثیر روش‌های آزمون تک لیف و دسته الیاف بر خواص مکانیکی الیاف کربن}, abstract_fa = {استحکام الیاف تقویت کننده، موثرترین عامل بر استحکام کامپوزیت‌ها محسوب می‌شود، لذا روش دقیقی برای ارزیابی استحکام آن مورد نیاز است. دو روش برای تعیین استحکام و دیگر خواص کششی الیاف تقویت کننده (نظیر الیاف کربن) وجود دارد. این دو روش شامل آزمون تک لیف و آزمون دسته الیاف آغشته شده با رزین می‌باشند. هدف از این تحقیق، مقایسه دو روش مذکور جهت تعیین خواص مکانیکی الیاف کربن بر پایه الیاف پلی اکریلونیتریل (PAN)، است. الیاف کربن به کار رفته در این تحقیق شامل دو نوع الیاف کربن است که خواص مکانیکی آن‌ها شامل استحکام کششی، مدول کششی، کرنش شکست و انرژی شکست با استفاده از دو روش آزمون تک لیف و آزمون دسته الیاف ارزیابی شدند. نتایج نشان می‌دهند که آزمون تک لیف اگرچه روشی دشوار است، اما در مقایسه با آزمون دسته الیاف، استحکام کششی و انرژی شکست بزرگتر، و مدول کششی و کرنش شکست کوچکتری برای الیاف کربن ارائه می‌دهد.}, keywords_fa = {الیاف کربن,خواص کششی,آزمون تک لیف,آزمون دسته الیاف}, url = {https://jsfm.shahroodut.ac.ir/article_190.html}, eprint = {https://jsfm.shahroodut.ac.ir/article_190_5048be0852358e6e96be8132aa883ad7.pdf} }