@article { author = {Fathi, E. and Hashemi, Sayyed H.}, title = {Experimental, numerical and analytical study of energy absorbtion in drop weight tear test specimen with chevron notch on API X65 steel}, journal = {Journal of Solid and Fluid Mechanics}, volume = {10}, number = {2}, pages = {95-110}, year = {2020}, publisher = {Shahrood University of Technology}, issn = {2251-9475}, eissn = {2251-9483}, doi = {10.22044/jsfm.2020.9440.3129}, abstract = {Drop weight tear test (DWTT) is a common experiment to determine the dynamic properties and evaluate the fracture energy of steel specimens. The purpose of present research is presenting experimental, numerical and analytical methods for determination energy transferred to the specimen during impact. Test specimen was cut from an actual spiral seam welded steel pipe with an outside diameter of 1219mm and wall thickness of 14.3mm and then machined to standard size. Then chevron notch was placed in the middle of specimen and test sample was fractured under dynamic loading with initial impact velocity of 6.3m/s. Experiment was impelemented on three specimens by dropping the impactor from 2m height. By drawing and analyzing the energy-displacement and energy-velocity diagrams a linear relation between fracture energy and hammer velocity was. Using this relation by having the impactor velocity in each time, one could evaluate the transferred energy to the specimen and finally the fracture energy of tested specimen. Also, using kinetic energy and potential energy formula by knowing the hammer location and velocity in each time and by neglecting energy losses one could calculate the absorbed energy in the specimen}, keywords = {: Drop Weight Tear Test,API X65 steel,Fracture Energy,Energy Absorbtion,Chevron Notch}, title_fa = {بررسی تجربی و عددی جذب انرژی در نمونه آزمایش سقوط آزاد وزنه با شیار ماشین‌کاری شده در فولاد API X65}, abstract_fa = {آزمایش ضربه سقوطی یک آزمایش رایج جهت تعیین خواص دینامیکی و محاسبه انرژی شکست نمونه‌های فولادی می‌باشد. هدف از این تحقیق ارائه روش‌های تجربی، عددی و تحلیلی جهت محاسبه میزان انرژی منتقل شده به نمونه حین اعمال ضربه می‌باشد. نمونه آزمایشگاهی از بدنه لوله فولادی از جنس API X65 با درز جوش مارپیچ با قطر خارجی 1219 میلی‌متر و ضخامت دیواره 3/14 میلی‌متر بریده و تا ابعاد استاندارد ماشین‌کاری شده است. سپس در وسط نمونه شیار شورن به عمق 1/5 میلی‌متر ایجاد و نمونه تحت بارگذاری دینامیکی با سرعت اولیه 3/6 متر بر ثانیه قرار گرفت. آزمایش بر روی سه نمونه با سقوط چکش از ارتفاع 2 متری صورت پذیرفت. با ترسیم و تحلیل نمودارهای انرژی-جابجایی و انرژی-سرعت چکش ضربه زننده یک رابطه خطی بین انرژی شکست نمونه و سرعت چکش بدست آمد. به کمک این رابطه می‌توان با معلوم بودن سرعت چکش ضربه زننده در هر لحظه، انرژی منتقل شده به نمونه و در نهایت انرژی شکست نمونه آزمایشگاهی را بدست آورد. همچنین، به کمک رابطه انرژی جنبشی و انرژی پتانسیل و معلوم بودن موقعیت و سرعت چکش در هر لحظه می‌توان مقدار انرژی جذب شده داخل نمونه را با فرض ناچیز بودن تلفات بدست آورد.}, keywords_fa = {آزمایش ضربه سقوطی,فولاد API X65,انرژی شکست,انرژی جذب شده,شیار شورن}, url = {https://jsfm.shahroodut.ac.ir/article_1867.html}, eprint = {https://jsfm.shahroodut.ac.ir/article_1867_c71dcc18ea7723d2acc71fbf557fa293.pdf} }