@article { author = {Parvaz, H.}, title = {Analytical and numerical investigation of reaction forces in fixturing of the rigid workpiece with polyhedral geometry}, journal = {Journal of Solid and Fluid Mechanics}, volume = {10}, number = {1}, pages = {17-29}, year = {2020}, publisher = {Shahrood University of Technology}, issn = {2251-9475}, eissn = {2251-9483}, doi = {10.22044/jsfm.2020.8494.2925}, abstract = {Reaction forces are generated at the locating points of the machining fixture by application of the external forces. They are considered as one of the important input parameters in different stages of fixture design procedure; including fixture planning, unit design, and verification. In the present study, an agile tool is proposed for calculation of the reaction forces based on the minimum norm principle. For validation of the results, finite element analysis is performed in Abaqus® software on a rigid workpiece with polyhedral geometry. Reaction forces are calculated from the numerical analysis and compared to the theoretical predictions. The worst-case error value equal to 3.9% is obtained for the theoretical predictions of the normal-to-surface components of reaction forces in comparison to the numerical results. Theoretical predictions of the tangential components of reaction forces are not accurate which seems to be a shortcoming for the model; however, their effects are negligible by considering that the intensity of these forces are low in comparison to the normal components. Effects of the influence parameters including the coefficient of friction and intensity of the clamping forces are also investigated on the results. It was concluded that the theoretical predictions of the normal components of reaction forces agreed well to the numerical data and results that were published at the previous studies. Agreement between the theoretical predictions, results of the previous studies and the finite element results confirmed the accuracy of the suggested model in calculation of the reaction forces in fixturing of the polyhedral workpieces.}, keywords = {Coefficient of Friction,Fixture Design,Locating,Minimum Norm Principle,Reaction Force}, title_fa = {آنالیز تحلیلی و عددی نیروهای عکس‌العمل در قید و بند قطعات با هندسه چندوجهی}, abstract_fa = {در قید و بندها، نیروهای عکس‌العمل در نقاط جاسازی در اثر اعمال نیروهای خارجی شامل نیروهای بست و ماشین‌کاری ایجاد می‌شوند. اندازه این نیروها در طراحی قید و بندها حائز اهمیت بالایی بوده و به عنوان ورودی در مراحلی همچون طرح‌ریزی قید و بندها، طراحی المان‌ها و صحت‌سنجی استفاده می‌شود. در این مقاله، روشی چابک و دقیق بر مبنای اصل کمینه اندازه نیروها، برای محاسبه نیروهای عکس‌العمل در قید و بندهای ماشین‌کاری پیشنهاد می‌شود. روش پیشنهادی، قابلیت پیش‌بینی اندازه این نیروها را بدون نیاز به اجرای شبیه‌سازی المان محدود فراهم می‌سازد. برای صحت‌سنجی مقادیر پیش‌بینی شده از تئوری، شبیه‌سازی عددی به‌کمک نرم‌افزار آباکوس بر روی قطعات با هندسه چندوجهی اجرا شده است. با مقایسه نتایج، انطباق مناسبی بین مقادیر پیش‌بینی شده برای مؤلفه عمودی نیروهای عکس‌العمل از تئوری، نتایج آنالیز عددی و نتایج ارائه‌شده در پژوهش‌های پیشین مشاهده شد. بیشینه خطا در پیش‌بینی نیروهای نرمال بر سطح از تحلیل پیشنهادی نسبت به نتایج شبیه‌سازی 9/3% بدست آمد. مقادیر بدست‌آمده از تحلیل ارائه‌شده برای مؤلفه مماسی نیروهای عکس‌العمل دقیق نبوده و قابل اعتنا نیست. هرچند این موضوع را می‌توان به‌عنوان یکی از نقاط ضعف تحلیل ارائه‌شده دانست؛ ولیکن، با توجه به اندازه اندک این نیروها، امکان چشم‌پوشی از آن‌ها در طراحی قید و بندها وجود دارد. اثر پارامترهای مؤثر شامل ضریب اصطکاک و نیروی بست بر روی نتایج نیز مطالعه شد. تطابق مناسب بین پیش‌بینی‌های تئوری و نتایج عددی، بیانگر کارائی مدل ارائه‌شده برای محاسبه سریع نیروهای عکس‌العمل در قید و بند قطعات با هندسه چندوجهی است.}, keywords_fa = {جاسازی,ضریب اصطکاک,طراحی قید و بند,کمینه اندازه نیروها,نیروی عکس العمل}, url = {https://jsfm.shahroodut.ac.ir/article_1799.html}, eprint = {https://jsfm.shahroodut.ac.ir/article_1799_809a901ad4d5b3e91800f68e2850fe97.pdf} }