@article { author = {Molla-Alipour, M. and Shariyat, M.}, title = {Stress analysis of circular plates with variable thickness as transverse asymmetric}, journal = {Journal of Solid and Fluid Mechanics}, volume = {9}, number = {1}, pages = {97-109}, year = {2019}, publisher = {Shahrood University of Technology}, issn = {2251-9475}, eissn = {2251-9483}, doi = {10.22044/jsfm.2019.7670.2751}, abstract = {In this study, stress analysis of circular plate with variable thickness with clamped and simply-supported edge are presented. In the most previous research on the variable thickness plates, midplane symmetric plates were analyzed but as a first time in this study, by using two independent functions for top and bottom surfaces, transverse asymmetric plates can be analyzed. By using the combination of first order shear deformation plate theory and 3D elasticity method the shear and normal stress components such as transverse shear and normal stresses are extracted. For examination of the accuracy of the obtained results based on the presented analysis, the obtained results are compared with those obtained by 3D elasticity of ABAQUS software based on the finite element method. The comparisons show that the presented solution has very good accuracy and presented procedure for stress analysis of circular plates are very effective. Based on the presented procedure in this is study, 3D figures of stresses in the radial and thickness directions can be easily extracted and the stress components can be investigated more effectively.}, keywords = {Stress analysis,circular plate,variable thickness,Analytical solution}, title_fa = {تحلیل تنش ورق‌های دایره‌ای با تغییرات ضخامت بصورت نامتقارن عرضی}, abstract_fa = {در این مطالعه تحلیل تنش ورق دایره‌ای با ضخامت متغیر تحت شرایط مرزی گیردار و ساده ارائه شده است. در اکثر مطالعاتی که تاکنون بر روی ورق‌های با ضخامت متغیر انجام شده است ضخامت ورق بنحوی تغییر می‌کند که ورق نسبت به لایه میانی متقارن باشد اما در این مقاله برای اولین بار با در نظر گرفتن دو تابع مستقل برای سطوح رویین و زیرین، ورق‌های ضخامت متغیر در حالت عدم تقارن عرضی نیز قابل تحلیل می‌باشند. با استفاده از ترکیب تئوری برشی مرتبه اول و روش الاستیسیته سه بعدی تمامی مولفه‌های تنش‌های برشی و عمودی از جمله تنش‌های قائم و برشی عرضی استخراج شده‌اند. جهت بررسی دقت نتایج حاصل از تحلیل حاضر، نتایج بدست آمده با نتایج حاصل از نرم‌افزار آباکوس که بر اساس الاستیسیته سه‌بعدی و روش اجزای محدود استخراج شده‌اند مقایسه گردیده است. مقایسه نتایج نشان می‌دهد که حل ارائه شده از دقت بسیار بالایی برخوردار بوده و روند ارائه شده جهت تحلیل تنش ورق‌های دایره‌ای روشی بسیار موثر می‌باشد. بر اساس روند ارائه شده در این مطالعه، نمودارهای سه‌بعدی تنش‌ها بر حسب شعاع و ضخامت براحتی قابل استخراج می-باشد که این امر موجب می‌شود مولفه‌های تنش‌ بصورت موثرتری بررسی شوند.}, keywords_fa = {تحلیل تنش,ورق دایره‌ای,ضخامت متغیر,حل تحلیلی}, url = {https://jsfm.shahroodut.ac.ir/article_1474.html}, eprint = {https://jsfm.shahroodut.ac.ir/article_1474_637a23dadb0d4628007f350c56f9d8d0.pdf} }