@article { author = {Sharafi, A. and Ramezanizadeh, Mahdi and Ahmadkhah, A.}, title = {Numerical Investigation of Longitudinal and Vertical Positions of Canard on Pressure Distribution and Aerodynamic Coefficients of a Maneuverable Aircraft Wing Model}, journal = {Journal of Solid and Fluid Mechanics}, volume = {6}, number = {4}, pages = {301-316}, year = {2016}, publisher = {Shahrood University of Technology}, issn = {2251-9475}, eissn = {2251-9483}, doi = {10.22044/jsfm.2016.826}, abstract = {In this research, canard and its vertical and longitudinal positions effects on pressure distribution and aerodynamic coefficients of a maneuverable aircraft wing model have been investigated numerically applying the fluent software. The investigations have been performed at the Reynolds number of 5×105 and different angles of attack, using unstructured grid and the Reynolds stress modeling. The applied wing and canard are delta shape and the supposed canard longitudinal positions are front, middle and rear, and its vertical positions are up, middle and low, respect to the main delta wing. For the case of no canard configuration model, the obtained results show that until angle of attack of 25 degrees, there is a very good agreement between the experimental data and the numerical results. Adding the canard causes the vortex on the wing upper surface become stronger and bigger. Also, for all longitudinal and vertical positions of the canard, the canard’s wake passes over the main wing surface. When the canard is at forward-up position respect to the main wing, the highest amount of lift force achieves. Furthermore, the least amount of drag force relates to the case which the canard is closer to the main wing and along with its axis. However, maximum amount of aerodynamic performance achieves when canard is at down-forward position respect to the main delta wing.}, keywords = {Delta Wing,Canard,Canard's Horizontal And Vertical Positions,Pressure Distribution,Aerodynamic Coefficients}, title_fa = {مطالعه عددی اثرات موقعیت‌های طولی و عمودی کانارد بر توزیع فشار و ضرایب آیرودینامیکی یک مدل بال هواپیمای مانورپذیر}, abstract_fa = {در این تحقیق، اثرات کانارد و موقعیت های طولی و عمودی آن بر توزیع فشار و ضرآیب آیرودینامیکی یک مدل بال هواپیمای مانورپذیر، با استفاده از شبیه سازی عددی مورد مطالعه قرار گرفته است. بررسی ها در عدد رینولدز 105×5 و در زوایای حمله مختلف با استفاده از شبکه ی بی سازمان و مدل آشفتگی تنش رینولدز انجام شده است. بال و کانارد مثلثی شکل اند و کانارد در موقعیت های طولی جلو، وسط و عقب و موقعیت های عمودی بالا، وسط و پایین نسبت به بال قرار گرفته است. نتایج بدست آمده نشان می دهد که برای ترکیب مدل بدون کانارد، تا زاویه حمله 25 درجه، تطابق بسیار خوبی بین داده های تجربی و حل عددی وجود دارد. اضافه نمودن کانارد باعث می شود که گردابه روی سطح بالایی بال، قوی تر و بزرگ تر شود. همچنین، برای موقعیت های مختلف طولی و عمودی کانارد، دنباله ناشی از گردابه کانارد از روی بال اصلی عبور می کند. ضمناً، برای حالتی که کانارد در موقعیت جلو و بالا نسبت به امتداد بال اصلی قرار گرفته باشد، بیشترین مقدار نیروی برآ بدست می آید. همچنین، کمترین مقدار نیروی پسا مربوط به حالتی است که کانارد نزدیک به بال اصلی و در امتداد محور آن باشد. به هر حال، بیشترین مقدار بازده آیرودینامیکی مربوط به حالتی است که کانارد در موقعیت پایین- جلو قرار گرفته باشد.}, keywords_fa = {بال مثلثی,کانارد,موقعیت های طولی و عمودی کانارد,توزیع فشار,ضرایب آیرودینامیکی}, url = {https://jsfm.shahroodut.ac.ir/article_826.html}, eprint = {https://jsfm.shahroodut.ac.ir/article_826_2406a1af79315c8c1152f5ff502a91b7.pdf} }