@article { author = {طالبیان, هدی and مهدوی خواه, مهدی and niazmand, hamid}, title = {Adsorbent Bed Modeling to Investigate the Particle Diameter Effect for Different Adsorber Conditions}, journal = {Journal of Solid and Fluid Mechanics}, volume = {1}, number = {3}, pages = {41-54}, year = {2012}, publisher = {Shahrood University of Technology}, issn = {2251-9475}, eissn = {2251-9483}, doi = {10.22044/jsfm.2012.80}, abstract = {The adsorbent particle diameter has a great influence on the performance of adsorption chillers since it directly affects the inter particle and intra particle mass transfer resistances. The chiller performance variation with particle diameter is dependent on various parameters, yet this study investigates the effects of most important ones such as fin height, fin spacing and thermal fluid heating and cooling temperatures on the optimum value of particle diameter which corresponds to the optimum value for the specific cooling power of the system. A plate fin-tube heat exchanger is employed and the fin spaces are filled with SWS-1L. The three dimensional heat and mass transfer equations of adsorbent bed are solved simultaneously with the heat transfer equations of thermal fluid, metal tube, fins and the chamber. The results show that the cycle time and the specific cooling power have an optimum value for a specified particle diameter. This diameter increases with an increase in fin height and a decrease in fin spacing. Moreover it has been found that the optimum particle diameter increases with an increase in heating and cooling temperatures of the thermal fluid.}, keywords = {Adsorption chiller,modeling,adsorbent particle diameter,fin height,heating water temperature}, title_fa = {مدلسازی بستر چیلر جذب سطحی به منظور بررسی تاثیر قطر ذرات در شرایط مختلف}, abstract_fa = {اندازه قطر ذرات جاذب تاثیر زیادی بر عملکرد چیلرهای جذب سطحی دارد و مقدار انتقال جرم درون ذره ای و برون ذره ای را مستقیما تحت تاثیر قرار می دهد. تغییرات عملکرد سیستم نسبت به قطر ذرات جاذب وابسته به پارامترهای زیادی است. این مطالعه به تاثیر برخی از مهمترین پارامترها شامل ارتفاع فین ها، فاصله بین فین ها، دمای آب گرم و دمای آب خنک کننده بر قطر بهینه ذرات جاذب که متناظر با حداکثر ظرفیت سرمایش مخصوص است، می پردازد. از یک مبدل حرارتی که شامل لوله های فلزی و فین های صفحه ای بوده و فضای بین فین ها با ذرات سیلیکاژل SWS-1L پر شده، استفاده شده است. معادلات بستر به صورت سه بعدی و همزمان با معادلات مربوط به سیال ناقل حرارت، لوله فلزی، فین ها و محفظه حل شده اند. پس از بررسی نتایج مشاهده شد مقدار زمان سیکل و ظرفیت سرمایش مخصوص دارای مقداری بهینه نسبت به قطر ذرات جاذب بوده که این قطر با افزایش ارتفاع فین، افزایش یافته و با افزایش فاصله بین فین ها اندکی کاهش می یابد. همچنین اندازه این قطر بهینه با افزایش دمای آب گرم و آب خنک کننده افزایش می یابد.}, keywords_fa = {چیلر جذب سطحی,مدلسازی,قطر ذرات جاذب,ارتفاع فین,دمای آب گرم}, url = {https://jsfm.shahroodut.ac.ir/article_80.html}, eprint = {https://jsfm.shahroodut.ac.ir/article_80_92744112899e2b13091ab554756124c4.pdf} }