@article { author = {Pour, M. and Aliabadi, A. and Rahman nia, S.}, title = {Identifying Process Damping of Turning Process Using Time Series Analysis}, journal = {Journal of Solid and Fluid Mechanics}, volume = {5}, number = {4}, pages = {35-45}, year = {2015}, publisher = {Shahrood University of Technology}, issn = {2251-9475}, eissn = {2251-9483}, doi = {10.22044/jsfm.2015.568}, abstract = {In most simulations conducted by researchers in the turning process, damping of system is considered from modal analysis. Indeed, in these studies the contact of the tool with the workpiece is not taken into account that can be reduced the accuracy of the simulation. In this paper, the process damping of the turning process is defined by using time series analysis. The recommended method is based on comparison with the correlation dimension of the simulation to experiment of displacement signal in the feed direction . Therefore, the variation of process damping based on variations feed and spindle speed is calculated. The results simulation of displacement of tool in feed direction in MATLAB software against displacement of tool in experiments, indicate significant accuracy of the proposed method in determinig displacement the tool in the turning process. The results of suggested approach can be used for predicting surface roughness of the manufactured workpiece by using turning process.}, keywords = {Turning Process,Process Damping,Correleation Dimension,Time Series Analysis}, title_fa = {تعیین میرایی فرآیندی فرآیند تراشکاری با استفاده از تحلیل سری زمانی}, abstract_fa = {در اکثر شبیه‌سازی‌هایی که در زمینه فرآیند تراشکاری تا‌کنون توسط محققان انجام گرفته است، میرایی سیستم در زمان برش با میرایی بدست آمده از آزمایشات مودال، یکسان در نظر گرفته شده است. به این ترتیب اثر تماس ابزار با قطعه‌کار درنظر گرفته نشده است و این ساده‌سازی می‌تواند سبب کاهش دقت شبیه‌سازی شود. در این مقاله، به تعیین میرایی زمان برش در فرآیند تراشکاری به روش تحلیل سری‌زمانی پرداخته شده است. این روش، برپایه مقایسه بعد همبستگی سیگنال جابجایی ابزار در راستای پیشروی در آزمایش و شبیه‌سازی است. بدین ترتیب میرایی زمان برش قابل محاسبه خواهد بودکه با شرایط تماس بین ابزار و سطح قطعه کار در زمان ماشینکاری در پیشروی‌ها و سرعت‌های برشی مختلف تغییر می‌کند. مقایسه نتایج شبیه سازی جابجایی ابزار در نرم‌افزار متلب با جابجایی‌های بدست آمده از آزمایش، حاکی از دقت قابل توجه روش پیشنهادی، به منظور تعیین جابجایی ابزار در فرآیند تراشکاری است.از نتایج روش پیشنهاد شده، می‌توان جهت پیشگویی بافت سطح قطعات تولید شده در فرآیند تراشکاری استفاده کرد.}, keywords_fa = {فرآیند تراشکاری,میرایی‌ فرآیندی,بعد همبستگی,تحلیل سری زمانی}, url = {https://jsfm.shahroodut.ac.ir/article_568.html}, eprint = {https://jsfm.shahroodut.ac.ir/article_568_a483c16391af02bc74070aa697024a88.pdf} }