@article { author = {Khadem, J. and Abotalebi, A. and Nourazar, S.}, title = {Investigation of Internal Flow of Binary Gas in a Rotating Cylinder Using Direct Simulation Monte-Carlo (DSMC)}, journal = {Journal of Solid and Fluid Mechanics}, volume = {5}, number = {2}, pages = {261-270}, year = {2015}, publisher = {Shahrood University of Technology}, issn = {2251-9475}, eissn = {2251-9483}, doi = {10.22044/jsfm.2015.414}, abstract = {In this paper a rarefied binary gas mixture flow of Argon and Helium inside a rotating cylinder with constant angular velocity and constant wall temperature is investigated using the direct simulation of Monte - Carlo (DSMC) method. The number of different molecules were used, to study the dependence of the solution to number molecule model. The results show that increasing the number of molecules model is more accurate, but On the other hand increase the simulation time. Also for modeling the intermolecular collision, the variable soft sphere (VSS) and the variable hard sphere (VHS) were investigated in present work and the results were compared with each other. The results show that the variable soft sphere model (VSS) compared to the variable hard sphere model (VHS) for the temperature of the mixture near the cylinder walls more carefully. The analytical solution is also presented and compared with the current simulation results.}, keywords = {Rotating Cylinder,Variable Hard Sphere (VHS) Model,Variable Soft Sphere (VSS) Model,Direct Simulation of Monte-Carlo (DSMC)}, title_fa = {بررسی جریان داخلی مخلوط گاز دوتایی درون یک استوانه دوار به روش شبیه سازی مستقیم مونت کارلو}, abstract_fa = {در مقاله حاضر، جریان داخلی مخلوط حاوی گاز­های آرگون و هلیوم درون یک استوانه دوار با سرعت زاویه­ای و دمای دیواره  ثابت به روش شبیه­سازی مستقیم مونت کارلو مورد بررسی قرار گرفته است. به منظور بررسی وابستگی حل به تعداد مولکول مدل، از دو تعداد مولکول مختلف استفاده شده است. نتایج نشان می­دهد که افزایش تعداد مولکول­های مدل، منجر به نتایج با دقت بیشتری می‌شود، اما منجر به افزایش زمان شبیه‌سازی می­گردد. در مدل‌های برخورد مولکولی از دو مدل کره­ سخت با قطر متغیر و مدل کره نرم با قطر متغیر استفاده شده و نتایج آنها با یکدیگر مقایسه گردیده است. نتایج نشان می‌دهد که شبیه سازی با استفاده از مدل کره نرم نسبت به مدل کره سخت برای دمای مخلوط در نزدیکی دیواره سیلندر از دقت بالاتری برخوردار است. حل تحلیلی مربوطه نیز ارائه شده و با نتایج شبیه­سازی عددی کار حاضر مقایسه گردیده است.}, keywords_fa = {استوانه دوار,مدل کره سخت با قطر متغیر,مدل کره نرم با قطر متغیر,شبیه سازی مستقیم مونت کارلو}, url = {https://jsfm.shahroodut.ac.ir/article_414.html}, eprint = {https://jsfm.shahroodut.ac.ir/article_414_aa842bec718619fd9bbb83243f1f1669.pdf} }