@article { author = {Abdollahi Azghan, M. and Amirian, U. and Eslami-Farsani, R. and Alizadeh, A.}, title = {The effective parameters on shear properties of sandwich panels with glass fibers-vinyl ester composite skin and polyvinyl chloride core}, journal = {Journal of Solid and Fluid Mechanics}, volume = {10}, number = {1}, pages = {53-64}, year = {2020}, publisher = {Shahrood University of Technology}, issn = {2251-9475}, eissn = {2251-9483}, doi = {10.22044/jsfm.2020.8734.2976}, abstract = {In this study, the effects of adhesive type (Epon 828 and Araldite EA 1103), the overlapping area (12.5 and 25 mm), and the surface treatment of the polymer composite on the shear behavior of the sandwich panels with a foam core of polyvinyl chloride (PVC) C7075 and a polymer composite skin (glass fibers-vinyl ester) were investigated by finite element simulation and experiment. The results revealed that the sample with Epon adhesive exhibited higher shear strength and lower strain percentage value compared to the sample containing the Araldite adhesive. The samples with an overlapping area of 12.5 mm showed higher shear properties compared to those with a 25 mm overlapping area which is due to the presence of more bubbles and imperfections on the overlapping surface. Due to increased contact area and penetration of the adhesive into the porosities, surface-modified polymer composites with 100-grit sandpapers exhibited higher shear properties in comparison with those surface modified with 60-grit sandpapers. Also, the investigation of the fracture mechanism showed that the two mechanisms of the adhesive fracture and the rupture of the PVC foam led to the destruction of the sandwich panel. Since the foam rupture mechanism overcame the adhesive fracture, the shear properties of the sandwich panel were increased. The results showed that there was a good agreement between the experimental and simulation results.}, keywords = {Sandwich panel,Adhesive Bonds,Surface Treatment,Composite Skin,Shear Properties}, title_fa = {پارامترهای موثر بر خواص برشی ساندویچ پنل با رویه کامپوزیت وینیل استر- الیاف شیشه و هسته پلی وینیل کلراید}, abstract_fa = {در این پژوهش، تاثیر نوع چسب اپوکسی (Epon 828 و Araldite EA 1103)، ناحیه هم پوشانی (mm 5/12 و 25) و اصلاح سطحی کامپوزیت پلیمری بر رفتار برشی ساندویچ پنل های با هسته فوم پلی وینیل کلراید (PVC) C7075 و رویه کامپوزیت پلیمری (وینیل استر- الیاف شیشه) به صورت تجربی و شبیه سازی مورد بررسی قرار گرفت. با توجه به نتایج، نمونه حاوی چسب Epon استحکام برشی بیشتر و درصد کرنش کمتری در مقایسه با نمونه حاوی چسب Araldite ارائه داد. نمونه های با ناحیه هم پوشانی mm 5/12 خواص برشی بیشتری در مقایسه با نمونه های با ناحیه هم پوشانی mm 25 داشتند که علت آن وجود حباب و عیوب بیشتر در سطح هم پوشانی بیشتر است. نمونه هایی که کامپوزیت پلیمری آن ها با کاغذ سنباده 100 اصلاح سطحی شدند، خواص برشی بیشتری نسبت به نمونه های اصلاح سطحی شده با کاغذ سنباده 60 داشتند که علت آن افزایش سطح تماس و نفوذ بهتر چسب به داخل تخلخل ها است. بررسی مکانیزم شکست نشان داد که دو مکانیزم شکست چسب و پارگی فوم PVC باعث تخریب ساندویچ پنل می شوند که غلبه مکانیزم پارگی فوم بر شکست چسب افزایش خواص برشی ساندویچ پنل را سبب می شود. نتایج نشان داد که تطابق قابل قبولی میان نتایج تجربی و شبیه سازی وجود دارد.}, keywords_fa = {ساندویچ پنل,اتصالات چسبی,عملیات سطحی,رویه کامپوزیتی,خواص برشی}, url = {https://jsfm.shahroodut.ac.ir/article_1801.html}, eprint = {https://jsfm.shahroodut.ac.ir/article_1801_493fba00211118ad3b37b2a17b9ab258.pdf} }