@article { author = {Shabani, M. H. and Rostami V.F., M.}, title = {Application and Comparison of Pressure and Velocity Correction Methods and Boundary Conditions in WCSPH Method for numerical modelling of 3D Inviscid Fluid Flow}, journal = {Journal of Solid and Fluid Mechanics}, volume = {9}, number = {4}, pages = {227-236}, year = {2019}, publisher = {Shahrood University of Technology}, issn = {2251-9475}, eissn = {2251-9483}, doi = {10.22044/jsfm.2020.8766.2986}, abstract = {In this paper, Weakly Compressible Smoothed Hydrodynamic (WCSPH) method was used to numerically simulate the three dimensional dam-break with obstacle in front of the flow. Euler equations as governing equations of inviscid fluid flow were used. Large and unphysical oscillations in pressure and velocity field are one of the most important problems in this method. In present study using density filter and conservative Riemann solvers, these oscillations was controlled and results of these two methods were compared with experimental data. Furthermore due to common using of artificial viscosity in WCSPH method, the simulation was implemented using artificial viscosity in momentum equations without density filtering and compared with last two methods. This comparison showed that the conservative Riemann solvers could well control the oscillations in pressure and velocity field and gives correct pressure results in WCSPH method. Finally two boundary conditions called dynamic and Repulsive forces were investigated in this paper.}, keywords = {WCSPH,Inviscid fluid,Artificial Viscosity,Pressure Correction and Velocity Correction,3D modelling}, title_fa = {کاربرد و مقایسه روش های اصلاح فشار و سرعت و شرایط مرزی در روش هیدرودینامیک ذرات هموار (WCSPH)در مدل سازی عددی سه بعدی جریان سیال غیرلزج}, abstract_fa = {در این مقاله از روش هیدرودینامیک ذرات هموار نسبتاً تراکم‌پذیر (WCSPH) برای شبیه‌سازی سه بعدی جریان شکست سد در حضور مانع پایین‌دست استفاده شده است. معادلات اویلر که حاکم بر جریان سیال غیر لزج است، مورد استفاده قرار گرفته است. نوسانات شدید و غیرواقعی در میدان فشار و سرعت ، یکی از مشکلات عمده در این روش است. در مطالعه حاضر، این نوسانات با استفاده از فیلتر چگالی و یک حلگر ریمن پایستار کنترل شده و نتایج حاصل از بکارگیری این دو روش با نتایج آزمایشگاهی مقایسه شده‌اند. بعلاوه از آنجایی استفاده از لزجت مصنوعی در روش هیدرودینامیک ذرات هموار متداول است ، لذا نتایج فوق با در نظر گرفتن لزجت مصنوعی در معادلات مومنتم و بدون در نظر گرفتن فیلتر چگالی مقایسه گردیده است. مقایسه این نتایج نشان داد که حلگر ریمن پایستار عملکرد خوبی در کنترل نوسانات میدان فشار و سرعت داشته و در محاسبه صحیح فشار موفق عمل کرده است. در نهایت عمکرد دو شرط مرزی دینامیک و دفع‌کننده در این مقاله بررسی شده است.}, keywords_fa = {هیدرودینامیک ذرات هموار,جریان غیرلزج,لزجت مصنوعی,اصلاح فشار و سرعت,مدلسازی سه بعدی}, url = {https://jsfm.shahroodut.ac.ir/article_1736.html}, eprint = {https://jsfm.shahroodut.ac.ir/article_1736_17866c5e993c8f9ab66740de374980dc.pdf} }