@article { author = {Abedini, V. and Aghaee Attar, M. and Tamimi, P.}, title = {Investigation of single point incremental forming parameters effect on the blanks produced by friction stir welding}, journal = {Journal of Solid and Fluid Mechanics}, volume = {8}, number = {4}, pages = {85-96}, year = {2018}, publisher = {Shahrood University of Technology}, issn = {2251-9475}, eissn = {2251-9483}, doi = {10.22044/jsfm.2019.6152.2468}, abstract = {Friction stir welding (FSW) process is a method for joining the aluminum alloys. Nowadays, it is considered to form the blanks fabricated by this method. Single point incremental forming (SPIF) is used to manufacture complex shapes with high depth which is not possible with traditional methods. SPIF is a flexible method for low production or manufacturing a prototype model. In this paper, experiments are performed on the blanks fabricated by FSW process to study the effect of the SPIF parameters. The first step conducted to investigate the influence of rotational speed and feed rate of friction stir welding process on mechanical properties of AA 6061-T6. The output of this step is the appropriate samples for next step. In the next step, the effect of the lubrication, rotational speed, feed rate and tool trajectory has been studied on thickness reduction (thinning), surface roughness and formability. The results show the lubricant and tool trajectory increase the depth of formation up to 1.6 times. Also, these two parameters improve the effects of thickness reduction and surface quality.}, keywords = {Friction stir welding,Formability,Single point incremental forming,Surface roughness,thickness reduction}, title_fa = {بررسی اثر پارامترهای فرآیند شکل دهی تدریجی تک نقطه ای روی نمونه‌های ساخته شده از جوشکاری اصطکاکی اغتشاشی}, abstract_fa = {یکی از روش‌های اتصال انواع آلیاژهای آلومینیوم عملیات حرارتی پذیر، روش جوشکاری اصطکاکی اغتشاشی است. امروزه شکل‌دهی ورق‌های حاصل از این روش مورد توجه قرار گرفته است. به منظور ایجاد شکل‌های پیچیده با عمق زیاد که با روش سنّتی امکان پذیر نیست، از روش شکل‌دهی تدریجی استفاده می‌شود. روش شکل‌دهی تدریجی تک نقطه‌ای روشی انعطاف پذیر برای تولید کم و ساخت مدل اولیه می‌باشد. در این مقاله به مطالعه تجربی فرآیند شکل‌دهی تدریجی بر روی ورق آلومینیوم 6061 حاصل از روش جوشکاری اصطکاکی اغتشاشی پرداخته شده است. در گام اول، اثر سرعت دورانی و سرعت پیشروی ابزار بر خواص مکانیکی ناحیه جوش در آلیاژ آلومینیوم 6061 بررسی و پارامترهای مطلوب استخراج شد. در گام بعدی، اثر روانکار، سرعت دورانی، سرعت پیشروی و مسیر ابزار بر میزان کاهش ضخامت (نازک شدگی) ،زبری و عمق شکست درفرآیند شکل‌دهی تدریجی مورد بررسی قرار گرفت. نتایج نشان می دهد روانکار و مسیر ابزار، میزان عمق شکل دهی را تا 6/1 برابر افزایش می دهد. همچنین با استفاده از این دو پارامتر اثرات کاهش ضخامت و کیفیت سطح نیز بهیود می یابد.}, keywords_fa = {جوشکاری اصطکاکی- اغتشاشی,شکل پذیری,فرآیند شکل‌دهی تدریجی تک نقطه‌ای,کاهش ضخامت,کیفیت سطح}, url = {https://jsfm.shahroodut.ac.ir/article_1415.html}, eprint = {https://jsfm.shahroodut.ac.ir/article_1415_a0079dbe9e46f45b718cb963a9fd72b0.pdf} }