@article { author = {Azimi, A. and Daneshgar, E.}, title = {Numerical Simulation of 3-D Pollution Propagated from a Gaseous Source Through ‎Indoor Space by Applying Pressure Zonal Model}, journal = {Journal of Solid and Fluid Mechanics}, volume = {8}, number = {1}, pages = {99-109}, year = {2018}, publisher = {Shahrood University of Technology}, issn = {2251-9475}, eissn = {2251-9483}, doi = {10.22044/jsfm.2017.3590.1986}, abstract = {Simulating the distribution of emissions in indoor spaces is usually done using very time-consuming and costly ‌computational fluid dynamics methods. In this paper, in order to achieve a suitable accuracy and high-speed method for ‌simulating three-dimensional emission propagation in a room due to a gaseous pollution source, a pressure version of the ‌zonal method has been developed. To demonstrate the capabilities of this developing method, two problems of the air ‌emission within a room have been investigated. At the first problem, for validating the results of this research, the emission ‌simulation through contaminated air into a room with dimension of 3×4×2.5 m via an air-conditioning gate mounted on the ‌wall near the ceiling is done and the results have been compared with the experimental data and the results of the numerical ‌solution of Navier-Stocks Equations. According to this comparison, the percentage of average error between the present ‌results and the experimental data is 26.8 and also the percentage of average error between the present results and the results ‌of numerical solution is 10. After that, considering both constant and instantaneous gaseous pollution sources in a room with ‌dimensions of 3×4×3 m, pollution distributions in the room have been evaluated. According to the results of this research, ‌this zonal method can obtain acceptable results in far less time than those of the experimental and computational fluid ‌dynamics methods. Therefore, this method can be efficient for considering time-consuming environmental problems.‌}, keywords = {Air Zonal Method,Pressure Version,Contaminant Distribution,Gaseous Contaminant Source}, title_fa = {شبیه‌سازی عددی سه‌بعدی آلودگی انتشاریافته از یک منبع گازی درون فضای داخل با اعمال مدل ناحیه‌ای فشار}, abstract_fa = {شبیه‌سازی توزیع انتشار آلودگی در فضاهای داخل، معمولاً با استفاده از روش‌های بسیار زمان‌بر و پرهزینه دینامیک سیالات محاسباتی ‌انجام می‌گردد. در مقاله حاضر به منظور دست‌یابی به روشی با دقت مناسب و سرعت بالا، جهت شبیه‌سازی سه‌بعدی انتشار آلودگی بر ‌اثر وجود منبع آلودگی گازی در اتاق، روش ناحیه‌ای نسخه فشار توسعه داده شده‌است. به منظور نشان دادن قابلیت روش توسعه داده ‌شده، دو مسأله انتشار آلودگی مورد بررسی قرار گرفته شده‌است. در مساله اول که برای اعتبارسنجی نتایج این تحقیق می‌باشد، ‌شبیه‌سازی انتشار آلودگی به واسطه ورود هوای آلوده به یک اتاق با ابعاد 5/2×4×3 متر از طریق دریچه تهویه‌مطبوع تعبیه شده روی دیوار ‌و نزدیک به سقف انجام شده و نتایج آن با داده‌های آزمایشگاهی و نتایج حل عددی معادلات ناویراستوکس مقایسه شده‌است. نتایج نشان ‌می‌دهند که درصد خطای متوسط حل ناحیه‌ای نسبت به داده‌های تجربی برابر با 8/26 و نسبت به حل عددی معادلات ناویراستوکس ‌برابر با ۱۰ است. در ادامه، با در نظر گرفتن دو نوع منبع آلودگی گازی ثابت و لحظه‌ای در یک اتاق با ابعاد 3×4×3 متر، توزیع آلودگی در ‌محیط داخل مورد بررسی قرار گرفته‌است. با مشاهده نتایج حاصل از این تحقیق، می‌توان نتیجه گرفت که این روش، نتایج قابل قبولی را ‌در زمان بسیار کمتری نسبت به روش‌های آزمایشگاهی و حل عددی معادلات ناویراستوکس به‌دست می‌دهد. در نتیجه این روش می‌تواند ‌در بررسی مسائل زیست محیطی زمان‌بر، کارآمد باشد.‌}, keywords_fa = {روش ناحیه‌ای هوا,نسخه فشار,انتشار آلودگی,منبع آلودگی گازی}, url = {https://jsfm.shahroodut.ac.ir/article_1199.html}, eprint = {https://jsfm.shahroodut.ac.ir/article_1199_a405e3060ae8b537f3e68bd9134802a1.pdf} }