@article { author = {Moradi, M. and Khorram, A. and Abdollahi, H.}, title = {Investigation of metallurgical and mechanical properties of TIG welded parts for material replacement}, journal = {Journal of Solid and Fluid Mechanics}, volume = {7}, number = {4}, pages = {87-95}, year = {2017}, publisher = {Shahrood University of Technology}, issn = {2251-9475}, eissn = {2251-9483}, doi = {10.22044/jsfm.2018.5930.2421}, abstract = {In this research, metallurgical and mechanical properties of TIG welded parts were investigated. For this purpose, TIG welding operation with optimum input parameters was carried out on XH50 and Hastelloy x rolled sheets. For comparison these two materials and feasibility of material replacement, initially elemental analysis of the two materials was accomplished and then the properties such as microstructure, tensile strength and micro-hardness were examined for both initial and welded specimens. The results show that heat affected zone in Hastelloy x welded samples is wider than XH50 welded samples and Heat affected zone in Hastelloy x welded samples consists of three regions. Despite the same tensile properties of the two materials, micro-hardness of the initial material and also tensile strength and micro-hardness of the welded specimen for Hastelloy x were significantly higher than XH50. The average of tensile strength for Hastelloy x welded samples is approximately 31% higher than that for XH50 welded samples due to formation brittle phases in XH50 samples. Therefor Hastelloy x is more desirable than XH50 for TIG welded parts.}, keywords = {TIG Welding,Material replacement,Metallurgical properties,Mechanical Properties}, title_fa = {بررسی خواص متالورژیکی و مکانیکی در قطعات جوشکاری شده به روش تیگ جهت جایگزینی مواد}, abstract_fa = {در این پژوهش خواص متالورژیکی و مکانیکی قطعات جوشکاری شده به روش تیگ مورد مطالعه و بررسی قرار گرفت. برای این منظور جوشکاری تیگ با پارامترهای بهینه ورودی، بر روی ورق های نورد شده از دو ماده XH50 و Hastelloy x انجام شد. برای مقایسه این دو ماده و همچنین امکان جایگزینی ماده، ابتدا آنالیز عنصری دو ماده بررسی و سپس خواصی از قبیل ریزساختار، استحکام کششی و میکروسختی برای قطعات اولیه و همچنین برای قطعات جوشکاری شده مورد آزمایش قرار گرفتند. نتایج نشان داد که منطقه متأثر از حرارت در ماده Hastelloy x بسیار پهن‌تر از نمونه XH50 و شامل سه ناحیه می‌باشد. با وجود خواص کششی تقریباً مشابه در دو ماده، خواص ماده Hastelloy x از نظر میکروسختی ماده اولیه و همچنین از نظر استحکام کششی و میکروسختی قطعه جوشکاری شده به طور محسوسی بهتر است. میانگین استحکام کششی جوش در نمونه‌های Hastelloy x حدود 31% بیشتر از استحکام جوش در نمونه‌های XH50 می‌باشدکه این امر ناشی از تشکیل فازهای ترد بین دانه‌ای در آلیاژ نمونه XH50 است.. لذا در قطعات جوشکاری شده به روش تیگ استفاده از ماده Hastelloy x مطلوب تر است.}, keywords_fa = {جوشکاری تیگ,جایگزینی ماده,خواص متالورژیکی,خواص مکانیکی}, url = {https://jsfm.shahroodut.ac.ir/article_1174.html}, eprint = {https://jsfm.shahroodut.ac.ir/article_1174_b7b96e2e7f5f6d77f0fd96247e4effec.pdf} }