@article { author = {Najafi, M. and Ansari, R. and Darvizeh, A.}, title = {Experimental study of the influence of mixing method of nanoclay on mechanical properties of polymer composites and fiber metal laminates}, journal = {Journal of Solid and Fluid Mechanics}, volume = {7}, number = {2}, pages = {63-80}, year = {2017}, publisher = {Shahrood University of Technology}, issn = {2251-9475}, eissn = {2251-9483}, doi = {10.22044/jsfm.2017.4885.2227}, abstract = {In this paper, the effect of different types of mixing processes of nanoclay on the mechanical properties of glass fiber/epoxy and fiber metal laminates is studied. For this purpose, the nanoclay was added to pure epoxy resin under mixing process by mechanical mixer, high-speed mechanical homogenizer, and ultrasonic homogenizer. Then, glass fiber/epoxy and fiber metal laminates were fabricated by pure resin and modified resin with nanoclay. In order to achieve high quality in the fabrication of laminate sheets, vacuum operation and post-curing in an autoclave were used under certain temperature and pressure. The effect of two parameters of the nanoclay percent and mixing process on the mechanical properties of the specimens was investigated using Taguchi design of experiments. The results obtained suggest that the nanoclay addition at lower percentages has a more effective role in increasing the flexural strength of the specimens. While by adding nanoclay particles in both material types, the flexural modulus show an increasing trend. Additionally, the result of signal to noise ratio showed that in determining mechanical properties of both material types containing nanoclay, the role of mixing process is more effective than nanoparticle loading.}, keywords = {Nanoclay,Fiber Metal Laminate,Glass fiber/epoxy composites,Flexural properties,Impact properties}, title_fa = {بررسی تجربی تأثیر روش اختلاط نانورس بر خواص مکانیکی کامپوزیت‌های پلیمری و چندلایه‌های الیافی فلزی}, abstract_fa = {در این مقاله، تأثیر انواع فرآیندهای اختلاط نانورس بر خواص مکانیکی کامپوزیت‌های الیاف شیشه/اپوکسی و چندلایه‌های الیافی فلزی مورد بررسی قرارگرفته است. به این منظور، نانورس تحت فرآیندهای اختلاط توسط همزن مکانیکی، هموژنایزر مکانیکی سرعت‌بالا و هموژنایزر مافوق صوت به رزین اپوکسی خالص افزوده شد. سپس چندلایه‌های الیافی فلزی و شیشه/اپوکسی با استفاده از رزین خالص و بهبودیافته با نانورس تولید شدند. به‌منظور دستیابی به کیفیت مناسب در ساخت ورق‌های چندلایه، از عملیات مکش خلأ و بازپخت در اتوکلاو تحت فشار و دمای معین استفاده شد. تأثیر دو پارامتر درصد نانورس و فرآیند اختلاط بر خواص مکانیکی نمونه‌ها در سطوح مختلف با بهره‌گیری از طراحی آزمایش‌ها به روش تاگوچی مورد بررسی قرار گرفت. بر اساس نتایج به‌دست‌آمده مشخص شد که افزودن نانورس در درصدهای پایین‌تر نقش مؤثرتری در افزایش استحکام خمشی نمونه‌ها دارد. درحالی‌که با افزودن مقادیر نانورس، در هر دو نوع ماده، مدول خمشی روند افزایشی نشان می‌دهد. همچنین بررسی‌ نتایج آنالیز سیگنال به نویز نشان داد که در تعیین خواص مکانیکی هر دو نوع ماده حاوی نانورس، نقش فرآیند اختلاط مؤثرتر از مقدار نانوذرات است.}, keywords_fa = {نانورس,چندلایه‌های الیافی فلزی,کامپوزیت‌های الیاف شیشه/اپوکسی,خواص خمشی,خواص ضربه‌ای}, url = {https://jsfm.shahroodut.ac.ir/article_1022.html}, eprint = {https://jsfm.shahroodut.ac.ir/article_1022_0633bce1f914e9df32bfe3e9d4057a55.pdf} }